My iPhone 4s will boot up and show the apple logo, but will then go to the loading circle and freeze.
I have tried multiple hard resets. What do I do?
Restoring via recovery mode (or DFU) is your only way out...
1. Make sure your iPhone is connected and turned off
2. when connecting your phone hold the honme button until you see the iTunes icon with a usb on it
iTunes may (or may not) show up and click the restore button
Your iPhone will hopefully fixed then
Similar Messages
-
Iphoto has recently stopped working; it continually shows the loading circle. I’ve uninstalled and reinstalled it,updated it and reinstalled all my apps with the ‘applications install DVD’ however it still does not work. I have also tried holding the command and option key while pressing iphoto then when the pop up appears i press the checkboxes that have been suggested by other users however nothing happens. Any other suggestions would be great!
Ok the program itself is likely fine, it's the files it depends on that are not.
Step #1
1: Open your Users/Library/Preferences folder (if on Lion you need to use the Go in Finder)
2: Scroll down until you see a file called
com.apple.iPhoto.plist
3: Trash it and reboot, start iPhoto and see if it works.
Step #2
1: Go to your Users/Pictures/iPhoto Library and right (or hold option) click on it and "show package contents"
2: Inside will be a folder with your originals, copy them out.
3: Move and rename the iPhotoLibrary file outside of the Pictures folder.
4: Reboot and restart iPhoto, check inside the Pictures folder if iPhotoLibrary was created.
5: Download ClamXav and run a scan on the Original photo's and your whole machine too while your at it.
(it's if there is a picture in there from Windows it could contain a corruption caused by malware)
6: Reimport the originals back into iPhoto.
See if those two steps resolve your issue, if not I could suspect next a network issue? Like iPhoto is trying to contact the internet and can't or gets hung?
You can can create another user, use the Shared Drop box to transfer files and log into the other user and see if it's a issue with just your User account, and if so you might just want to transisition over and then one day delete the old user and it's problems.
Please keep your Flash updated.
http://flashbuilder.eu/flash-player-version.html
Read my backup and restore etc., info here
https://discussions.apple.com/message/16276201#16276201 -
I cant login on the installed CC. it only shows the circle of loading. I reinstalled the cc a hundred times and did the tasks the Help on the chat said to me, but the problem is still there.
Hi Fabian,
Apologies that it is taking some time, please try the following steps & see if it helps :
1) Restart your machine.
2) Open Activity monitor and Force quit Adobe CEF Helper, Creative cloud, Adobe IPC Broker & Crash Deamon if available.
3) Try to open, if doesn't work then go to Applications>> Adobe Creative cloud>> Right click>> Get Info>> Click on the Add sign>> Select the user you are logged in>> Give Read and write access.
4) If that doesn't work then enable the root user and launch to update there, check this link on how to enable/sign in to root user: Enabling and using the "root" user in Mac OS X
Please let us know if that helps.
-Ankit -
I have not deleted anything... I've used the applications install dvd... I've tried following along with previous conversations BUT nothing seems to be working.. can someone please help me?
Oh! And since this has been not working... my iphoto won't load aswell.. does anyone know how to fix that issue?Diane,
Your photos are in the iPhoto Library. Almost certainly that is intact, so don't worry.
Go to your Home folder and open the folder called Pictures. What you want is in there, iPhoto Library. Don't do anything there, this is just to reassure yourself.
So it is a matter of getting the iPhoto app to work. Apps are in the Applications folder. Find it and trash it.
Next download iPhoto:
https://itunes.apple.com/us/app/iphoto/id408981381?mt=12 -
after i upgrade to ios 7.0.4 my iphone didn't work, only show a apple logo then dissapare again, and it happed almost a hour.
Try a reset by pressing and holding the home and power buttons for 15-20 seconds.
If it still does not boot up properly, put the device in DFU mode (google it) and restore. -
Hi there, I have a 2008 iMac 24' 3.06 Intel Duo with 4gb ram. And yesterday it was working totally fine and jolly with no issues. Then I noticed there was an OS X update for Mavericks, so I finally decided to do it, and once it was rebooted it went to like the grey screen and I could move my mouse, just nothing else was there. So I tried to restart it, and then it booted up, but was really laggy, and so I decided to restart it and try again, this time the iMac froze at the login. So I decided to take it apart, pull the 500gb hard drive, connect it to my MacBook Pro, and then formatted it in Disc Utility. From there, I opened the Mavericks installer on my MacBook and then installed it to the iMac's hard drive via usb hard drive enclosement. And once the install of Mavericks was completed, I put the hard drive back into the iMac and tried to boot it. It now boots up to the white screen with the Apple and the loading circle underneath the Apple and then it freezes and doesn't go any further. So then once that happened, I turned it off and tried to boot it into recovery mode. Then it freezes on the screen with the Apple and loading circle below it. Then out of desperation, tried to use a bootable disc of Mavericks to see if i can at least get the iMac to boot up again, with no success. It froze at the same point again. So now I reach out to the Apple Community to see if anyone else has an idea on what I can do or if anyone had this issue and what they did to resolve it. Any help would be great. Thanks.
mddcfilms and Pat75, I'm having precisely this same issue -- no booting but spinning and freezing gear under the Apple logo. Have either of you come to a resolution? Here are my details:
iMac, Early 2008, 24”, 3.06 GHz, 4GB
September 2013: Nvidia GeForce 8800 GS GPU repaired, HDD replaced with Western Digital 2TB
21 April 2014: Erased HDD with Disk Utility on Mavericks USB; clean installation of Mavericks from the USB. Process completed without issue, including registration process. After a minute or two of poking around, machine shut down immediately (not through the shut-down process).
Since then it will not boot up. Grey screen and Apple logo appear, with gear spinning; the gear freezes, then the machine tries to boot up again. Occasionally I’ll hear “To use English for the main language, press the return key.”
I’ve tried booting into Safe Mode; same gear freeze and restart.
I’ve tried booting to the 10.9 Recovery disk; same gear freeze and restart.
Tried booting from Mavericks USB; same freeze and restart.
Tried booting from 10.6.3 DVD; same freeze and restart.
Ran Apple Service Toolkit (at Stormfront in the UK), which turned up nothing in error.
Started in single-user mode to test HDD and RAM, which are fine.
Started in verbose mode to check logs; some error messages but nothing seems crucial. After the log screen, the grey screen and Apple logo appear, gear spins, and then freeze.
Cannot get to Apple Hardware Test (vintage machine too old?)
Cannot get to Target Disk Mode with my MacBook Pro
Ideas: Potential booting flaw in Mavericks installation. Firmware incompatibility with Mavericks. Hardware issue in Nvidia GPU (known for problems). At the moment I'm hoping that it's a Mavericks installation or firmware issue, though I suspect the Nvidia GPU has blown up on me. These graphics cards are known for being pieces of junk, so I may try installing the lower spec ATI Radeon 2600 GPU if I can find one at a reasonable price.
Anybody else have precisely these problems or have any advice? -
i disconnected my iphone 4 while it was updating and now its frozen, the screen is showing a apple logo and a loading bar which has been for 9hrs now. please help
It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process. -
my iphone was powered off due to low battery charged it after few hours it took 30 min to show apple logo but i noticed that my phone was charging slow and draining fast, after this updated it to 8.1.2 same problem & rest to factory still same problem (plz help)
Hello abdullahfromvenus,
Welcome to the Apple Support Communities! I see that you are experiencing issues charging your iPhone 5. I can understand how frustrating that may be. The following resource provides a few troubleshooting steps that may help to isolate and troubleshoot this issue:
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT203030
Cheers,
Matt M. -
I don't have working home button, but when i try to charge my iPod 4th gen it shows an apple logo that turns on and off and it wont let me turn on my iPod! How do i fix that?
Try:
- iOS: Not responding or does not turn on
Ignore the reset and when it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you
hi
... i have a similar problem
but just with the sleep botton.
fist use your adapter with other iphone/itouch ... is posible itś the problem
second .. let your phone charging
...normally if we conect our phone ... after some minuts it's put on.
after 2 hours ... trate to use it ... if after it your phone continue same... could be qaa electrical/physic problem
please if you have a guaranty use it.
im sorry but my english is terrible. -
i am trying to reset my iphone 4s with all original seting when i have done all procedure it has gone blank and showing only apple logo and i cannt off or on and not getting start.please advise/
try holding the home and power buttons at the same time for about a minute!
-
My iphone 4s crashed today and will not go back on. I see the apple logo, but nothing else will happen.
Hello jaicob1990,
Try the steps in the article below; it will give you multiple options on how to resolve the issue.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
my iphone 3g is not turn on after reboot only show me apple logo and then trun of auto . now its not get charging with my comp or adaptor. plz help me
I had the same problem i had to take to a shop to get a new battery so i did and now it is good so i suggest get a new battery hope this helped
-
IPhone 4s wont start-it's showing the iTunes symbol and the charging cable symbol
My husbands iPhone 4s wont start-it's showing the iTunes symbol along w/ the charging cable sumbol. I tried to press on the two buttons at the same time and only the sumbols reappear. I'm afraid to plug it to the laptop since my information-my back up is on that laptop. What do u reconmend?
Your iPhone is in recovery mode and because a reset did not resolve the issue you are left with plugging the iPhone into a computer with iTunes and restoring it to factory settings.
-
I have iphone5s and there is some problem about my iphone. I turn off the phone and then I turn on. After I turned on, It showed the page of apple signal and then the page of loading. It used long time to show the loading page. Then it was back to page of apple and then loading page again many times. What happen with it? And what should I do?
Did you already try to reset the phone again by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
If this does not work, try to set it up as new device, explained here:
How to back up your data and set up as a new device
You may have to connect in recovery mode, if the phone is not recognized in iTunes:
iOS: Unable to update or restore -
My laptop won't turn on. It's been hours and all it's showing is a white screen with the apple sign and the loading circle. I've tried turning it on and off, nothing's working. Please help!
Will it boot up in safe mode?
http://support.apple.com/kb/ph11212
or can you enter single-user mode?
https://support.apple.com/kb/ht1492
What version of OSX are you running?
Maybe you are looking for
-
Error while Releasing a transport request - DSO 0SD_O03: Active version
Hi all, I am getting below error when I am trying to release a transport request. Object ODSO 0SD_O03: Active version differs from modified version. I activated DSO again,but I was not successful to correct the error.Please help me correcting this er
-
Removing a backed-up drive from Time Machine
One of my external drives was starting to act up, so I chose to upgrade it and move all my files to the new drive. I didn't think to use Time Machine to do this, just old habits of manually copying files from one drive to another, then formatting the
-
SSL client authentication: how to get the cert used in call?
Hi ! I'd like to authenticate my clients based on their certificate. Unfortunately, there doesn't seem to be an easy way to get the client certificate that was used for the current method call. I am thinking of something like this: SomeClass dosometh
-
Dynamic Text w/in a movieClip
OK, so simple test I loaded a text file on the first frame of my movie: LoadVariableNum("Houston.txt", 0); This text file begins with Houston_txt="yadda, yadda..." Then I created a text field: rep_txt this text field is dynamic, variable is vRep_txt.
-
Time Machine - Calculating Changes
Many have suffered from Time Machine getting stuck at 99% after a Time Capsule added to system. I was tortured by the same problem and finally fixed it by reasoning things out. Remember, Time Machine looks to back up everything. When you add a Time C