My iphone 4s will not recognize the attempt to charge?

My iphone 4s when I first recieved the phone it will just turn off and will not recognize the attempt to reset/restart the phone. Now the phone will not recogize the attempt to charge. I tried different cords, outlets, cord base things, and even the computer. When I plugged my phone into the computer it recognized the charge only when the phone was off. When the phone turned itself back on it no lo0nger recongnized the charge. The computer then popped up with a message that said device malfunctioned pc will not recognized device. What should I do? When I took the phone multiple times to my service provider about the previous problems they said "Oh, thats technology for ya!" Any advice?

When I plug my phone into the computer tho it wont even reogize that it is there. If I reset my phone will I loose everything? Also which reset do I choose?
Reset all Settings
Erase All Content and Settings
Reset Network Settings

Similar Messages

HT1400 I purchased a new chip but my iPhone 4S will not recognize the new chip so what do I need to do?

I purchased a new chip but my iPhone 4S will not recognize the new chip so what do I need to do?

okay from reading posts it seems if I transfer my backed up info from my old comp to the new one and erase my dad's phone's back up i could reset my phone and it would transfer all my old data back onto the phone, be linked to the new computer and i could proceed. Where do i find the backed up info from my phone?

I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any t

I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any thoughts.

I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

Place the device in DFU mode (google it) and restore as new.

HT4913 My IPhone 5 will not recognize that I have an Itunes Match account. When I try to turn the Itunes Match button on in settings I get a mesage saying I am not subscribed to ITunes Match. This does not happen with my Ipad. Any Ideas what to do?

My IPhone 5 will not recognize that I have an Itunes Match account. When I try to turn the Itunes Match button on in settings I get a mesage saying I am not subscribed to ITunes Match. This does not happen with my Ipad. Any Ideas what to do?

SharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D

HT4623 how do I either: 1) turn off comptability feature, or 2) up grade the .exe to be compatable with the iphone ios 6.0.1 software. The computer will not recognize the phone.

How do I either: 1) turn off comptability feature, or 2) up grade the .exe to be compatable with the iphone ios 6.0.1 software. The computer will not recognize the phone. I reinstalled itunes, but it still does not work.

What are you talking about? There is no "compatibility feature" on the iPhone, and .exe files won't run on the phone.
Please slow down and explain exactly what you're trying to do and what happens when you try.

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place."
When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
I have no other options to choose another font. Thanks for any help you can direct my way.
Debbie
From: sukritd15 <[email protected]>
To: Deborah Karr <[email protected]>
Sent: Friday, February 13, 2015 5:35 AM
Subject: While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?

I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?

Do you remeber the exact (or close to it) wording of the error message?
Try manually placing the iPod in Recovery mode and then try to restore
Next try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
You can also try another computer to help determine if you have an iPod or computer problem.

I recently bought a new laptop because my old one crashed. The only backup I had for my music was on my ipod. My new computer will not recognize the ipods music and I can't transfer anything. What do I do???

I recently bought a new laptop because my old one crashed. The only backup I had for my music was on my ipod. My new computer will not recognize the ipods music and I can't transfer anything. It keeps asking me to sync the ipod to this computer, but I'm scared to lose all my music. I want to transfer some of the music onto my iphone but I can't. I'm very frustrated and wish I knew more about computers at the moment!?!? What do I do???

You will need the help of some sort of 3rd party software to help you copy the content from your Shuffle back to your PC. Once you have done that, you can reimport this music into iTunes and configure it to sync to your new Shuffle.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps.

Whenever I update from Windows 7 get error 1602, iPod shows USB connection to iTunes, but iTunes will not recognize the device. None of the Apple documentation helps. The Apple Mobile Device driver is loaded and operating. The anti-virus software and firewall are not at fault (were uninstalled, and made no difference). The iTunes on my older machine running Vista does recognize the inoperative iPod (iTunes has detetced an iPod in recovery mode) and allows me to restore the device. Can anyone help to resolve this problem on the Windows 7 PC?

So yu tried all of this:
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
If you had then time for an appointment at ther Genius Bar of an Apple store.

My iphone 4s will not show the lightning bolt on the battery icon while plugged in

My iphone 4s will not show the lightning bolt icon while plugged into either the wall or the computer. It shows between 1% and 4% charge. I have reset, and done a factory reset, and this has not fixed the issue. My computer will not recognize the device. While off, the iphone shows that it recognizes that it is plugged in, but i cant tell if its charging because the lightning bolt will not show. Please help.

Try the troubleshooting in one of these support documents:
For a Windows PC try this http://support.apple.com/kb/TS1538
For a Mac try this http://support.apple.com/kb/TS1591

I am trying to hook my macbook pro to a sony bravia TV via DVI to HDMI cable and the TV will not recognize the signal. The same set up has worked with three other, though different televisions. Any thoughts?

I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?

Is the TV set to take input from the HDMI connection?
On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection. Try clicking Detect Displays just to see if the computer can now sense the presence of the connection. Check your connections.
If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image. Set the proper resolution (probably 720p, 1080i, or 1080p). Set the refresh rate (probably 60Hz) if that preference is shown. You should see a picture at this point. I recommend turning off mirrored displays if it is enabled.

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. Help.

I have an external hard drive that I have been using for years. All of a sudden my mac will not recognize the external as a "save as" device location. But the external does show up on my desktop and I can open it to drag and drop items. What happened and how do I get my mac to rerecognize the device?!?!?

Hi,
Check Finder>Preferences>Sidebar, is it checked there to show external drives?

HT1918 I have changed my new apple email address at the itunes store but when I try to buy an app on my iPad my old apple id (email) comes up and will not recognize the password. How do I change this? I tried going in through settings/tapping apple ID to

I have changed my Apple ID when I got a new email address and confirmed it. However when I go to my iPad to buy an app my old Apple ID comes up and will not recognize the password. I tried going into the settings on my iPad and tapping on the old Apple ID to go in to change it but it will not recognize it and I cannot get in on the iPad to change it. How do I change this ID on my iPad for the iTunes store?
Jaylsworth

How did you fix this??

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

My iphone 4s will not recognize the attempt to charge?

Similar Messages

Maybe you are looking for