My iphone 4s will still work and is still turned on but the screen will not light up. its completely black and my top button is broken.
My iphone 4s will still work and is still turned on but the screen will not light up. its completely black and my top button is broken.
Apple won't replace an iPhone under warranty if the iPhone has been opened/tinkered with by you or by a 3rd party, but they may under Apple's out of warranty or not covered under the warranty "repair" price.
There is only one way to find out for certain.
Similar Messages
-
should have typed in here...
If your computer is a 2011, you can stop the blue screen by turning off graphic card switching. Under apple, system preferences, energy, uncheck box. Temporary fix. Your logic board may need to be replaced if you are under warranty or have apple care otherwise $1000.00. May be software or firmware problem but apple has provided no info. Replacing logic board has corrected problem for some users and not others. Everything I've mentioned only applies to 2011 MBPs.
-
Ever since I downloaded/installed the ICloud IOS5 I can not use the camera icon on my Ipod. I can click on the icon, the screen will lighten just a little but it is not letting me see what is in the camera view. Any one else have this problem or know how I can fix it?
Make an appointment at the genius bar are your nearest Apple store. At this point there is nothing you can do without a computer, so if you don't have one and don't know anyone who has one that you can use the Apple store is a good fallback.
-
My iPhone 4 Is Turned on but the Screen if not turned on
The problem is that I can Slide to Unlock and hear sounds, it's fully functionall. Except ONE thing. The screen is constrantly Black!
I have tried to reset it to DFU mode etc.
NOTHING seems to work!
Help!Mountain Ryanne wrote:
I've only had the phone for a week...Help?
Make an appointment at an Apple store. -
I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
>CURVEBALL!!!<
The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
Any other suggestions? Please help!Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement. -
I dropped my phone in a toilet, the sound and vibrate are working but the screen will not turn on, what should I do? do I just need a new screen or what? I'm freaking out here
Don't freak out, just get over it. It's probably done.
What should I do if I drop my phone in the toilet?
Apple may offer you an refurbished iPhone in exchange for yours, for about half the cost of a new one.
I wouldn't be too specific about just how it got wet -
I recently go my screen replaced and it has worked since then. But now all a sudden the screen does not light up. I know my phone is on because Siri is still responsive if I hold the home button, I just can't see anything. Any suggestions?
Most likely the LCD Display connector simply came loose from its logic board connector. Take iPhone back to where it was repaired, and ask them to simply press the connector back into its place. Ask them to apply a bit of foam material or several small pieces of tape on top so the pressure of the flex connector plate holds it properly in place for the future.
-
my iPod touch fell on tile today and was cracked and even worse now half of the screen will not work! :''''( What can I do?
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 or the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
I purchased a new computer and also Adobe acrobat XI Pro. It has not worked properly. I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number. What can I do?
Hi,
Have you tried the help documents below:
Error "The serial number is not valid for this product" | Creative Suite
Invalid serial number error
In case of any other error message, please specify.
Regards,
Sheena -
I have lost my iPhone 5 and i have an iCloud but the iCloud was not turned on on my phone; nor is it setup with "Find my iPhone" App. Can i still find my phone? soon that is.
KreeBL wrote:
I have lost my iPhone 5 and i have an iCloud but the iCloud was not turned on on my phone; nor is it setup with "Find my iPhone" App. Can i still find my phone? soon that is.
Only if you walk around and look for it/ask others if they have seen it. -
my iphone has stopped working it had 80% of charging but the screen got black and now i cant switch it on, what should i do?
help me ASAP pleaseHello sameen shah,
The following article would be a great place to start for information that can help get your iPhone working again.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen -
My screen just went blank and is still on but the screen is not working what shall i do?
my screen just went blank and is still on but the screen is not working what shall i do?
Have you tried turning off the phone and then turning it on again?
-
My iPhone 4 screen stopped working. The phone is still on but the screen is not working at all, it is juts black. I was told restoring my phone might solve this problem so i plugged it into iTunes. When I click on the restore iPhone button a message popped up saying I needed to turn off 'find my iPhone' in phone settings for the restore to be go ahead. Problem is I cant access my phone!
I went onto my cloud account to see if i could do it from here but it doesn't seem to be doing anything. Any ideas?From your iCloud account, you can go to Find My Phone and remove the iPhone from your devices list which will release it, or you could do a remote erase of the iPhone from iCloud.
-
Just connected apple tv. Everything works perfectly but the screen is not in color. I have tried reversing the HDMI cable and changing the output in settings and restarting. The screen is still black and white. Any ideas of how to fix this?
Hi im,
Thanks for using Apple Support Communities. This article has a few troubleshooting ideas for issues with color on your TV when using Apple TV:
Apple TV (2nd and 3rd generation): Troubleshooting video issues
http://support.apple.com/kb/TS5148
Cheers,
- Ari -
I have problem with my Iphone 5, when I talk my ear allways tuch the screen and get it on no sound, the screen are not lock, is ti possible to lock the screen when incomming an outgoing call going on
Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.
Maybe you are looking for
-
Carriage Return in line Text for invoice line item.
Hi, I am trying to create an non PO invoice through calling a BAPI "BAPI_INVOICE_CREATE" in which i am passing all the required data . I have a field called "SGTXT" which is item text and i am passing this field which has maximum length of 50 char i
-
Apple TV to smart TV connection
I've connected my LG wifi ready tv to my Apple TV via hdmi. ATV connects to Internet via wireless which is all I need really, so I'm bypassing all the smart tv features. However, There are couple of things that would be nice to access to on smart tv
-
Flex: two projects, one OK, other POP-UP blocker
I created a sample application with Flex after compiling and saving runs OK with default IE browser. I imported another application but before showing in IE a pop-up blocker shows up. Is there any configuration I should include in one of the files to
-
Hi Experts I just want to know how will i be able to filter Company in my "Load from Infoprovider" I am loading data from BW the data is consist of all companies in my members But i just want to upload only the company that i will be choosing when i
-
My print jobs are getting stuck; not printing. I have reloaded software, restarted print spooler, checked for correct port, still not printing. I have Vista. Any help is appreciated.