My iPhone 4s won't restore and is stuck in recovery mode

Hello everyone in the apple community
I recently purchased an iPhone 4s and I set it up via iCloud and it worked later when I arrived home after going with my dad for a party my iPhone would not start it was in recovery mode so I tried putting it in iTunes and starting restoring it then after it was 75% done it rebooted and iTunes says "the iPhone 'iPhone' could not be restored an unknown error occurred (1) so I tried again but still no luck and I also tried putting it in dfu mode but still no luck. I don't think it has been jail broken because I don't know anything about jail breaking .
Could anyone please help me?

I have been frustrated with several issues:
1) Smart Playlist not syncing correct (not matching iTunes library)
2) Songs staying on my iPhone and iPad that should be coming off.  Songs that should be going on not.
3) iPhone and iPad filled with OTHER (amber) taking up space on the phone/pad.
4) iPhone and iPad continually getting stuck on last Step during syncing.
5) Neither would Restore.  Get stuck on last step of download and then give a timed-out error.
Here's what I did and it seems to have worked.
By the way, I have had no problems with my iPod Classic.
To fix:
1) Make sure you sync and back up your iPhone/iPad (even though it's not been fully correct).
2) Make sure you back up to iClould (this is key).  If you don't use iCloud, sign up.  It's free.  Otherwise you will lose all that is saved to your device.  I did lose some photos, so email yourself any that you just would cry if you lost).
3) I have my device checked with SYNC THIS DEVICE...OVER WI-FI (although I don't think it has any affect on these steps).
4) Go to SETTINGS>GENERAL>RESET>ERASE ALL CONTENT AND SETTINGS
5) It'll make sure you really want to do this and you will have to enter any password on the device.
6) It takes a few seconds to clear.  It'll then reset.
7) Follow instructions on the device (same ones you did when you first got it).  During set-up, turn iCloud on with Apple ID.  Once you go through the set-up, the device should have some Apps that come free and it should have no content.
8) Connect to your iMac (not sure if this will work with a PC, but should). 
9) Set up as new device (I did not want to restore from what I had because I didn't want to put back the same problems). 
10) Select the Apps, Music, Podcasts, Photos, etc that you want on your iPhone/iPad.  This step takes time because you will have to arrange the apps on the page you want and reselect the items you want on the device.
11) Sync/Apply.  This will take some time if you have a lot of items.
12) After the sync is complete.  Disconnect from the iMac and go to Settings.  You'll want to reset (how you want them) the Notificiation Center, Sounds, Wallpaper, add your email, etc.  If your Contacts and Calendar are connected to your email address (Outlook), they will all come back once your email is set back up.
13) There, likely, will be some small adjusments you will want to make (custom ringtones, time to lock-screen, etc) that you will make as you go.  These are minor.
14) I did these steps the other day.  Played the iPod all day today (over 100 tracks affecting many Smart Playlist).  Came home, synced the iPod (no problems as normal); synced the iPhone and then the iPad and both synced fast and accurate.  What a change :-)
Hope this helps!  Time will tell.
Coach Dave

Similar Messages

  • My ipod touch wont restore and its stuck in recovery mode

    I have an Ipod touch 2g mc model and it started having problems. it crashed often when playing games (i even restart it after installs), it restarted when i went on to the internet and got SUPER slow, so tried restoring it. it got to the point where it said "Preparing the ipod for Restore" and then it said "unkown error occurred(1603). and its been stuck in recovery mode for a long time now and i cant get it out no matter what i do. How do i leave recovery mode a different way? please respond.
    p.s. ive had multiple errors but my most recent one has been 1603. and now it keeps saying 1603.

    My Dad just fixed my problem! He used blackra1n. at first it dint work but then he saved it to documents and then put it into the Local Disk thingy, then he clicked on it, clicked the Make It Rain button, and it took like 20-30 minutes or maybe less while it was saying Running. Then finally my ipod turned back on! it didnt lose anything! like, Nothing at all was lost. so yah, that was pretty cool.

  • IPhone 5 not turning on and is stuck in recovery mode

    First off i have an 32gb iphone 5 which is running ios 7.0.4.
    Last week my iphone kept crashing and restarting by itself. then, sometime in the night the other day it went into recovery mode and the screen looked like this
    http://www.copytrans.net/blog/wp-content/uploads/2013/09/iphone-recovery-mode-io s-7.png
    I used TinyUmbrella to fix this and the phone went back to normal until the next day, when it suddenly turned off in my hand (whilst at 100%) and wouldnt turn on (with a black screen). i tried a hard reset but that didn't work. I connected it to my computer which said that it was in recovery mode and i needed to restore it. i tried this as my last option to make it work but when it begins to restore the computer tells me that it is waiting for iphone, while the iphone stays at 0. When i click restore is the only time my iphone screen lights up. the phone does not move and eventually i am forced to do a hard reset to stop it. then the screeen goes back to black and won't turn on until i restore, then everything happens again.
    I have tried DFU mode but when i do it my phone disappers from itunes (in recovery mode) and comes back when i let go of all buttons.
    Is there anything else i can do?

    First off i have an 32gb iphone 5 which is running ios 7.0.4.
    Last week my iphone kept crashing and restarting by itself. then, sometime in the night the other day it went into recovery mode and the screen looked like this
    http://www.copytrans.net/blog/wp-content/uploads/2013/09/iphone-recovery-mode-io s-7.png
    I used TinyUmbrella to fix this and the phone went back to normal until the next day, when it suddenly turned off in my hand (whilst at 100%) and wouldnt turn on (with a black screen). i tried a hard reset but that didn't work. I connected it to my computer which said that it was in recovery mode and i needed to restore it. i tried this as my last option to make it work but when it begins to restore the computer tells me that it is waiting for iphone, while the iphone stays at 0. When i click restore is the only time my iphone screen lights up. the phone does not move and eventually i am forced to do a hard reset to stop it. then the screeen goes back to black and won't turn on until i restore, then everything happens again.
    I have tried DFU mode but when i do it my phone disappers from itunes (in recovery mode) and comes back when i let go of all buttons.
    Is there anything else i can do?

  • Can't get my phone to restore and is stuck in recovery mode

    I have the latest version of itunes and for some reason it everytime i try to restore it, it gets to just about the end of the process then says that an unknown error stopped the restore process (error 1015)
    can someone please help!

    I couldn't wait any longer as it wouldn't get out of recovery mode from either my iMac or my macbook pro, so I just ended up making a genius appointment.
    The first time this happened, the genius told me to create a brand new admin account in my computer to see if it would clear up any issues with the syncing, but that didn't help when I tried it.
    Yesterday the genius told me that I would just have to do a clean wipe on my imac and making sure to select "archive" when doing the clean install. He said it's most likely something on the computer and not with the iPhone since this is my second iphone replacement and the same thing keeps happening.
    If you come across with a better solution than wiping the computer, please post it here.
    Thanks,
    Damian

  • Help iPhone 4s could not restore (error 1) - stuck in recovery mode

    I thought I had successfully converted from iPhone 3g to 4s could not connect to att phone service.  To reinstall, I reset to iPhone 4s to restore factory settings. software downloaded successfully, but after install completes I get a message that iPhone 4s could not restore (error 1).  Followed by message that iTunes has detected an iPhone in recovery mode and that I can restore original setting bu clicking Restore.  Doing that reats the problem  After 10 attempts, I am frustrated.  Itunes no longer shows capacity, software version or serial number for iPhone .  Lists those as n/a.  Need help

    Unfortunately the restore did not solve the connectivity problem, but it made it even worse. The phone was not connecting to the carrier at all, constantly showing "Searching...". I tried another restore, this time it failed on three different computers (one of them was a fresh iTunes installation)... Strange, that it worked once.
    @Unshaven: Multiple combinations of Power and Home button did not work either. Seems to be bricked now. I think I have to return it to Apple ...
    Btw. Windows iTunes showes some log errors like 'getenv radio-error' failed and DoesDriverNameMatchDeviceID failed.
    Any ideas welcome also regarding the issue of loosing connectivity to the carrier...

  • HT1339 iPod Nano will not restore and is stuck in Recovery Mode.

    The iPod Software is up to date (as is iTunes itself), and I recieve the following message after clicking "Restore iPod..." and supposedly restoring it:-
    "iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used with iTunes."
    Attempting to restore it again (by clicking "Okay" on the dialog box and then "Restore iPod..." in iTunes) will repeat the above ad infinitum.

    In some cases, the iPod might get into a state in which the battery needs to be drained before it can be reset so try these steps.
    1. Disconnect iPod from all power sources and leave it disconnected for about 24 hours.
    2. Reconnect iPod to the Apple iPod Power Adapter or the computer and reset it.

  • HT1414 my iphone 4 won't restore and update. It stays on the itunes connect picture

    my iphone 4 won't restore and update.  it stays on the itunes connect picture.  i have tried all the suggestions for error 21 and they haven't helped

    iOS: Unable to update or restore - Support - Apple

  • Every time i try to update or restore my iPhone 4 (5.1) it tells me a lot of errors and it stuck in recovery mode :/ any help?

    Every time i try to update or restore my iPhone 4 (5.1) it tells me a lot of errors and it stuck in recovery mode :/ any help?

    Well, if you want or need help, it would be a good idea to start with telling us what those errors are.  We're not mind readers.

  • My iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.

    My iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.
    i have tried to restore it to different firmwares, tried resetting ,dfu mode , different systems etc etc nothing worked

    My iphone 3gs does not restore and is stuck on white screen and a message in itunes which says "waiting for itunes" plz help.
    i have tried to restore it to different firmwares, tried resetting ,dfu mode , different systems etc etc nothing worked

  • Trying to restore iphone 4s to factory settings, now its stuck on recovery mode???

    trying to restore iphone 4s to factory settings but is stuck on recovery mode. home button does not work. can anybody help me? i have tried to restoer it several times but it wont work??

    try a different cable a different usb port, drop all security software and fire wall, try a different computer here are the steps
    recovery mode
    open itunes on computer
    plug cable into computer not iOS device
    turn device off
    hold home button and plug cable into IOS device.  do not release home button until an itunes graphic appears on IOS device.
    look to computer should have message about recovery mode click ok and restore
    Peace, Clyde
    if u need an article see
    http://support.apple.com/kb/HT1808

  • HT201210 i can't restore my iphone4 from 5.1 to 6 and it stuck in recovery mode need help

    i can't restore my iphone4 from IOS 5.12 to IOS 6 and it stuck in recovery mode need help please

    Read here > http://support.apple.com/kb/HT1808
    Hope that helps.

  • HT201263 My iPhone 4 started to update but got stuck in recovery mode. I've tried everything anyone on the website has told me to do, but nothing has worked. Is there anything I can do? I need my phone

    My iPhone 4 started to update but got stuck in recovery mode. I've tried everything anyone on the website has told me to do, but nothing has worked. When you go to turn it on, it shows the Apple symbol,  then it goes to the connect to iTunes screen. When I do that, it just says error with the code 9006. I've followed what the Apple site has said to do for it, but the phone is still is the same  state. Is there anything I can do? I need my phone back as soon as possible.

    Hello Hester Emily,
    Thanks for using Apple Support Communities.
    I'm sorry to hear about the difficulties you're experiencing after this update process.  I found the following article that has more information on the iTunes error code 9006:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Configure your security software
    Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
    Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
    Take care,
    Alex H.

  • HT201210 i have a 4th generation 8gb and its stuck in recovery mode. I have tried everything i even got a new computer. When i try to recover it it has to do an update and when its done and error pops up. What do i do i seriously need help

    i have a 4th generation 8gb and its stuck in recovery mode. I have tried everything i even got a new computer. When i try to recover it it has to do an update and when its done and error pops up. What do i do i seriously need help

    You said "and error pops up. " Just what does the error message say?

  • IPhone won't update to 6.1 and is stuck in recovery mode

    I attempted to update my iPhone from 6.0.1 to 6.1 today; however, in doing so iTunes informed me that the update could not be verified. Upon receiving this message, I thought that my phone would just go back to how it was, but that wasn't the case. The iPhone 4s is now stuck in recovery mode. It just keeps shutting down and going back to the apple logo. In addition to this, I am unable to put the phone in DFU mode due to the fact that my power button randomly stopped working a few weeks ago. Any ideas on how to regain use of my iPhone? Any help is greatly appreciated.

    I'm having the same problem, I tried to update to whatever the last version was as I hadn't got that 33mb update yet, during the process my phone froze. I tried to unfreeze my phone by giving it a hard reboot (holding the home and power button) but now my phone is stuck in recovery mode.
    I tried various programs that provide a "recovery mode fix" none worked.
    Manually downloaded the latest ipsw as I failed five times from 5AM to try and get iTunes to download the latest version and restore my phone.
    When I try to restore to iOS 8 I get "this iPhone could not be restored (error 2003)" and it has been like this for 12 hours. 12 hours I've been without a phone and all I wanted to do was update my software? What a joke. I have no idea how I'm going to fix this as literally everything I have tried has failed.

  • Was updating my iPhone 4 to the latest ios and now stuck in recovery mode.

    Was updating my iPhone 4 to the latest ios 5.1 (i believe) and a error message came up (didn't make a note of the error code sorry) but now phone is stuck in recovery mode with the USB wire and iTunes logo on. PC wont reconise iPhone when plug it in either. I had to delete an old back up before the update as i didn't have enough space on PC to do the update before but was told that during the update it backs up again anyway. I have looked in Device backup's and there is nothing there I have a feeling i'm going to have to restore it but hopefully there is another way as i wont be left with anything on the phone.
    Any help please.
    Many Thanks.

    Sorted it now, took it to Apple store and explained etc. was nothing could do but restore the phone. Was told to make sure itunes on PC was up-to-date version before updating iphone which could have caused the error.

Maybe you are looking for

  • Is Not Working Properly (.*?) in indesign javascript

    In IndesignCS3 Javascript couldn't get immediate occurance for example <month>.*?</month> It fetches months content from bolded opening month to closing month. What is the meaning of "?" input of the document: <ref id="r34"> <label>34</label> <nlm-ci

  • Settings Icon distorted

    Hi all, After installing the latest update mu 2nd generation iPod touch settings icon is all funky, its kind of a distorted image of some sort, one or two of the other apps have the same problem. Any one know of a solution? Thanks

  • External reference ("URI") for a photo in Lightroom?

    Is there a URI I could pass to a scripting language (I'm on Mac so AppleScript would be nice) that will launch LR and send me to the referenced photo? (I think not, hence I'm posting this in the "New Feature Request" forum). Thanks, Jon

  • Reinstall Photoshop CS6 on a new computer

    If have a computer with Photoshop CS6 installed. If I buy a new computer, can I reinstall my Photoshop CS6 on the new one. I have only one licence?

  • Transaction iView - NOHEADEROKCODE=1

    Hi , I want to hide the command box by setting the parameter NOHEADEROKCODE=1 . I believe this can be set in the ITS service parameters. Since this will change the setting for all the iViews rendered via SAP GUI for HTML , I wanted to know if there i