My iphone 5 can not charged. What is wrong with it?
My iphone 5 can not be charged, What is wrong with it?
Don't know what's wrong but take it back to apple they will replace it
Similar Messages
-
I can not backup to I cloud I tunes keeps saying can connect to Ipad. Need to backup to I cloud.
Backup to iCloud
Settings>iCloud>Storage and Backup>Backup Now -
My iPhone 4S won't turn on it's been off for two days now. I tried charging it but it makes a noise every 8 seconds,holding the buttons down and also plugging it to a computer. I need help on what to do or if anybody can tell me what's wrong with my phone
Yes ive tried a different charger and it also nothing shows when i plug it in just makes a noise
-
my iphone 5's screen blacks out every now and then. the phone is turned on but the screen is black and i can receive calls. what is wrong with my phone?
I have to believe this has something to do with iOS 7 issues. I have taken my screen blacked out 5s twice to the Genius Bar and the found a bunch of system apps had crashed. So if this is the case, is iOS7 the problem?
-
After upgrade my Iphone 4 to iso5, I can't add contact and I can't access the settings for mail,contacts and calender. The moment I select the setting for Mails, Contact and Calender it will jump back to home. Can someone advice what's wrong with it?Problr
Dear All
i have done the same activity ( buy a new iphone 4 -> upgrade to ios5 - > configure email) with success-
than when i start to move the contacts from old mobile to iphone (using the microsim) i receive the same crash
in disgnosis e use i saw 2 dump with this title 'latestCrash-Preferences.plist and LatestCrash.plist. in each file the date is the same and i read:
Exception Tyle: EXC_CRASH (SIGABRT)
Exception code: 0x00000000, 0x00000000
Chrashed Thread: 6
in thread 6: name: Dispatch queue:
com.apple.addressBookUI.ContactsSettingPlugin
and thaan a lot of data.
Have you any idea?
thank in advance
Fabio -
When on the phone to someone the phone crackles and hangs up so the other person can't hear what is wrong with it? :(
That iPhone needs to be tested by the techs at an Apple store genius bar to see what is faulty in the hardware.
-
IPhone 4S will not charge, what are my options
My iPhone 4S will not charge, I've tried different cords, how do you remove the back, and could it be the battery?
Morning lake host,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone and iPod touch: Charging the battery
http://support.apple.com/kb/HT1476
For troubleshooting on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available.
Also refer to iPhone and iPod touch: Charging the battery.
Hope this helps,
Mario -
My iphone 5s consumed 10GB data this what's wrong with my VPN kindly guide suitably moreover battery drain fast
The long backups seem to be related to the size of the apps you installed, not the number. That's why some people with multiple pages of apps experience fast backups. There does seem to be a bug with the current firmware that can cause a crash when doing app uploads and syncs. This bug seems to be exacerbated by having large and many apps.
I was experiencing frequent crashes, but have no more - even with 70 apps installed - some of them large like the American Heritage Dictionary which is several hundred megabytes. I did the following:
1. I set iTunes to NOT do autosyncs every time I plug in. This setting is in the Itunes preferences.
2. I disabled the autobackups in iTunes for the iphone. I figured that if it did crash and it was going to take 2 hours to restore, why not just reload. The instructions are readily found using google search; it involves a command line setting. Anyway, the phone doesn't crash anymore since doing this.
3. I no longer install apps using the iPhone. I first install the app in iTunes and the I manually sync it to the iphone. I avoid doing multiple installs at once; at least for the large apps. Right click on each app and get its info from within itunes. If it is large, it is going to take time to backup.
4. I always first shut off the iphone and restart it before installing any apps in itunes. This clears any memory issues left behind from use.
I am going to continue to do these procedures until Apple releases a fix for the bugs relating to the apps.
As noted, since I took these steps, I have had no crashes. I was crashing at least once every 1-2 days before with the same or less number of apps. I too was a first gen iPhone user and was very frustrated with the 3G experience. Since doing the above, I am once again a very happy and productive iPhone 3G user. I know its a pain to do this, but the bugs will get fixed at some point. I would never go back to my old phones - they were just phones. -
Can anybody see what is wrong with this SQL statement?
Hey guys, just a quick question. Can anybody tell me what is wrong with this line of SQL? I keep getting a syntax error message. I've been trying for ages and I can't see any problem at all!"
{code}prepStat = connection.prepareStatement("INSERT INTO WeatherHistory (Date, Location, Overview, Temperature, WindDirection, WindSpeed, Pressure) VALUES ('"+date+"','"+location+"','"+temp+"','"+windDir+"','"+windSpd+"','"+pressure+"')");{code}
All the field names and variables definitely exist so I can't see what the problem is!DHD wrote:
Thanks for the replies.
I've matched the correct number of column names and variables, but still no luck.
And how exactly am I misusing Prepared Statements here?As noted above, not according to the code you posted. I didn't just pluck something out of my @ss and throw it out there. There was a reason behind what I said. And, if you mean you changed it, and you still got an exception, then post that exception (completely), and your new code, which is, hopefully, using PreparedStatement, (properly). -
Can you see what's wrong with my sql clause?
Select afkogltri sum( afpowemng ) as yqty
from ( afpo inner join afko on afpoaufnr = afkoaufnr )
into ( d_gltri , d_wemng )
where afpo~matnr = wa_pir-matnr
and year( afko~gltri ) = year( sy-datum )
group by afko~gltri.
The above is my sql clause, when I do a syntax check, it said:"Comma without preceding colon (after SELECT ?)"
Can you tell me what's wrong with this sql clause?
Thank you very much!Hi,
Select Bgltri sum( Awemng ) <b>as yqty</b> (????)
into ( d_gltri , d_wemng )
from afpo as A inner join afko as B
on Aaufnr = Baufnr
where A~matnr = wa_pir-matnr
and year( B~gltri ) = year( sy-datum )
group by B~gltri.
ENDSELECT.
eg<b>:... INTO (f1, ..., fn</b>)
Places the result set in the target area (f1, ..., fn). The fields of the result set are transported to the target fields fi from left to right. INTO (f1, ..., fn) is allowed only if a list with n elements is also specified in the SELECT clause.
<b>If the result of a selection is a table, the data is retrieved in a processing loop introduced by SELECT and concluded by ENDSELECT. The processing passes through the loop once for each line read. If the result is a single record, the closing ENDSELECT is omitted.</b>
Example
Output a list of all airlines (with short description and name):
TABLES SCARR.
DATA: CARRID LIKE SCARR-CARRID,
CARRNAME LIKE SCARR-CARRNAME,
SELECT CARRID CARRNAME
INTO (CARRID, CARRNAME)
FROM SCARR.
WRITE: / CARRID, CARRNAME.
ENDSELECT
Thanks & Regards,
Judith. -
My iphone 4s will not charge - what can I do?
I have had my iphone for about 8 weeks now, and now I can't get it to charge, even I put in the usb cable in my pc, or in the normal switch on the wall - what to do?
Try following these steps.
http://support.apple.com/kb/TS2802
Battery does not charge from the USB power adapter
Important: Only original iPhone can be charged from a FireWire-based power source. If iPhone is connected to a computer that's turned off or is in sleep or standby mode, the battery may drain.
Verify that the outlet being used is working.
Try another USB power adapter if available.
If no other USB power adapter is available, try connecting to a high-power USB 2.0 port (not a keyboard). The computer must be turned on and not in sleep or standby mode.
Try another USB cable if available. -
My Iphone 4 is not sending Imessage, but when I turn it off, I can text? What can I do to fix my phone?
iMessage is separate from texting - SMS/MMS.
http://support.apple.com/kb/ts2755 -
I have iphone 5s dose not charge what should i do
Hi i have problem .. my phone dose not charge .. ?
so bring it and your charger to Apple for evaluation
-
My IPOD will not charge, I have tried the docking station nothing, I tried plugging into the computer and nothing but the cord got extremely hot. I need my IPOD, any suggestions.
Sounds like a hardware problem. Take it to the nearest Apple Store.
-
Can't perceive what's wrong with SELECT.
Hello,
I've executed this select -
select *
from tax.tax_payer@reis tp
left outer join re_right@reis r on (tp.tin = r.tin or tp.tin = r.tin_a1 or tp.tin = r.tin_a2)
where (r.right_status = -1 or r.right_status is null)
--and r.right_id is not null
and tp.je_id = 12;
As a result, I've gotten an error message -
ORA-00933: SQL command not properly ended.
It is curious, that if I remove comment from the last but one line, the select has bee succesfully done -
select *
from tax.tax_payer@reis tp
left outer join re_right@reis r on (tp.tin = r.tin or tp.tin = r.tin_a1 or tp.tin = r.tin_a2)
where (r.right_status = -1 or r.right_status is null)
and r.right_id is not null
and tp.je_id = 12;
What's wrong?
P.S. Oracle 10.2.0.1.0Hi,
As Preta has said above, Everything seems to be correct.
Can you check like this
First run the following
select count(0)
from tax.tax_payer@reis tp
left outer join re_right@reis r on (tp.tin = r.tin or tp.tin = r.tin_a1 or tp.tin = r.tin_a2)
where (r.right_status = -1 or r.right_status is null)If ths above is ok then try
select count(0)
from tax.tax_payer@reis tp
left outer join re_right@reis r on (tp.tin = r.tin or tp.tin = r.tin_a1 or tp.tin = r.tin_a2)
where (r.right_status = -1 or r.right_status is null)
and r.right_id is not nulland then
select count(0)
from tax.tax_payer@reis tp
left outer join re_right@reis r on (tp.tin = r.tin or tp.tin = r.tin_a1 or tp.tin = r.tin_a2)
where (r.right_status = -1 or r.right_status is null)
and r.right_id is not null
and tp.je_id = 12This will tell you where you may be missing something.
Cheers!!!
Bhushan
Maybe you are looking for
-
Getting error while using DYNAMIC SQL
Hi Team, I am Oracle DBA. I have limited knowledge on PL/SQL. I used below PL/SQL code to drop 50 partitons from one of the table. I used Dynamic SQL EXECUTE IMMEDIATE to drop partions. But error occured. If I commented EXECUTE IMMEDIATE, procedure e
-
Exchange Global Address List search not showing name or email
I have an iPhone and iPad connected to a Microsoft Exchange server at work. When I search the GAL for a person in the company, the results are shown as the Company only (data coming from the 'Company' field on the Exchange server) instead of the cont
-
How to Load Hierarchies from flatfile in BI7
Hello Gurus, How to load Hierarchies from flat file in BI7 As when creating datasource in BI7, IT GIVES FOLLOWING OPTIONS TRANSCTION DATA MASTER DATA TEXTS MASTER DATA ATTRIBUTES... ALL THESE WE BRING TO PSA LEVEL BY INFOPAC
-
Memory Errors with NX4 and Adobe 3D
After installing the Adobe 3d trial version,I've had nothing but problems with NX4.Out of memory errors when there is plenty available.REinstalled NX4,same problems.Uninstalled adobe 3D,and the problem went away.We would like to purchase this,but not
-
Some sharepoints not showing up
Hi all, We just upgraded to Mountain Lion Server and after the upgrade, a sharepoint, which is a mounted disk image, disappeared. It shows up on the list of sharepoints on the server, but when you connect from a remote machine that one sharepoint is