My Iphone 5 does not ring, only vibrates, what do I do?

I tried everything and I couldn`t make it rings. To calls or messages.. it just vibrates Someone can help me?

Check:

Similar Messages

  • HT201401 My iPhone 4 does not ring only vibrates. I have restored but so luck. All the settings are okay. Ringtones can be heard through the speaker during selection. Please help. Thanks.

    My iPhone 4 does not ring only vibrates. I have restored but no luck. Ringtones can be heard through speaker during selection. Ring volume is also set at maximum.

    I had the same problem. I took the phone to the local tech shop and they replaced a fried headphone flex cable. Cost me $70.

  • HT201401 my Iphone does not ring or vibrate. How do I fix this problem?

    Hello Apple fam, I am having problems with my Iphone 3gs. My phone does not ring or vibrate and I don't know what the issue is with it. I love my phone and to ate to replace it with anything esle so please can someone help me resolve this problem the I am having with my phone. Thank you all and have a good day!

    You might need to UPDATE the DRIVER for your iPhone in DEVICE MANAGER.
    I searched quite a few Blogs and the answer below fixed my issue:
    Windows 7 incorrectly identifies the device as a Digital Camera.
    To fix this:
    - Plug in your iPhone  (don’t have iTunes loaded at this time)
    - Go to Device Manager (Click Start, right-click Computer, then click Properties. In the window that appears choose “Device Manager” on the left)
    - Scroll down and find “Apple iPod” or “Apple iPhone”
    It will likely be under the “Portable Devices” category.
    - Right-click the Apple device and choose “Update Driver Software…”
    - Choose “Browse my computer for driver software” in the window that appears
    - It will ask you for a location; you want to Browse to this folder (location is the same in 32 and 64 bit Windows):
    32-bit and 64-bit: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    - Click Next
    - It should find the driver for your device; let it install that driver 
    Once you complete these steps, reboot your computer. Once you reboot everything should work exactly as expected!

  • My iphone 4 does not ring only vibrates

    any ideas?

    forgot to tell you that its not in sleep mode neither in silent mode. I ve also tried reseting but nothing...
    any other ideas? pls

  • Iphone 4s, Does not ring and vibrate when there is an incoming call. It shows as missed.

    Just bought a new iPhone 4 s and realised that sometime I could see missed calls without hearing the phone ringing. Tried several times with an other phone to place a call and could see that when phone goes in standby (screen black) and there is an incoming call the phone does not ring or vibrate. It does start to ring only if I press the round button. Has anybody experienced the problem? Can you help me? Thanks

    [email protected],
    Sorry to hear the phone is not always ringing like it should. We don't want you to miss any calls. Let's get that ringing for you again. Try resetting the network settings: http://vz.to/17Us9Pn . Retest and let us know how it's working.
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • Hi my iphone does not ring and there is no voice when i try watching a video what do i do?

    Hi my iphone does not ring and there is no voice when i try watching a video what do i do?

    iPhone: No sound or distorted sound from speaker

  • After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

    After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this?  I have tried uninstalling and reinstalling itunes.  I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

    The problem is with version 10.4.1.  I had to reload 10.3 to get it to work.  The recommendation from a previous poster worked for me.  Here was their list of steps:
    Go to Control Panel>Programs>Uninstall
    2.  Uninstall the following Apple programs in the following order:
         a. iTunes
         b. QuickTime
         c. Apple Software Update
         d. Apple Mobile Devices Support
         e. Bonjour
         f.  Apple Appllcation Support
    3.  Reboot PC
    4.  Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
    If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes.  To correct this:
    5.  Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
    6.  Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
    7.  Copy and Paste this file back into the iTunes folder
    8.  Rename this "iTunes Library (date).itl" file by removing the date.  It should say "iTunes Library.itl"
    9.  Reboot PC

  • My iPhone does not ring after 8.2 upgrade and sound gone on iPad

    the sound as gone on my iPad and the iPhone does not ring when i get a call all after the 8.2 upgrade

    Hi pr1uk,
    It appears your devices are experiencing audio issues. The following article provides steps which may help you find a solution:
    If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
    Follow these steps and test the sound after each one.
    Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
    If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
    Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
    Restart your device.
    Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
    Go to Settings > Bluetooth and turn off Bluetooth.
    If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
    If the device is in a case, make sure that the case doesn't block the speaker.
    Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
    Update your device to the latest version of iOS.
    If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
    Thank you for contributing to Apple Support Communities.
    Take care,
    Bobby_D

  • My iphone does not receive electric charge, what I can do?

    my iphone does not receive electric charge, what I can do? the problem is the iphone, but i dont now why

    Hi daani94,
    If you are having charging issues with your iPhone, you may find the following articles helpful:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/ht1476
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • TS3805 The screen on my iPhone does not rotate only when it is on safari and the screen rotation lock is off, what should I do next?

    The screen on my iPhone doesn't rotate only when it is on safari.
    Could you please tell me what to do?

    reset the ipod, hold both the power and lock buttons for 10 seconds after the 10 seconds stop holding the buttons. IF this didn't work restore your ipo. 10 POINTS please.

  • HT4528 My Iphone does not ring and all calls go to voice mail. What to do?

    I need help before I have to brave the snow and go to the apple store at Destiny USA

    No it does not work either way.
    Thanks for taking the time. I will call Verizon

  • Iphone does not ring in standby mode

    my father has an iphone 3G,
    and it will not ring in standby mode.
    it worked perfectly when he was on 2.0,
    but when he upgraded to 2.1 it started having some problems.
    now he has 2.2.1 and the only problem it has is it will not ring while in standby.
    it will only ring when unlocked.
    is anyone else having this issue,
    and does anyone have any way to fix it?
    i dont know if it is irrelevant or not,
    but he is on windows XP.

    I was having the same problem and did a couple of "restores" and the issue kept coming back, after several calls and not much help I decided to delete an application that I had downloaded which was "Ski jump lite" and the problem has gone away. It worked fine on the previous version of apple software.
    Regards
    Steve

  • My IPhone does not ring into my voicemail from my land line which I have set up to forward to my IPhone. How do I fix this?

    HI,
    I bought my IPhone 4 in March of 2011. I use it for work purposes and I have my landlind from my desk forwarded to my IPhone. I am current on all of my updates but for some reason around AUgust 8th or the wek of I have not been able to get voice messages from my forwarded calls. The land line will forward to my cell and my cell will ring but it does not roll into my voice mail. I have been on the phone with Verizon who sent me to Apple who sent me back to Verizon. Is there anyone else out there that has had the same problem?

    Hey mslisa12
    Check to make sure that you do not have the Personal Hotspot turned on, go to Settings > Cellular and turn it off or change the password.
    iOS: Understanding Personal Hotspot
    http://support.apple.com/kb/HT4517
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • HT201270 phone will not ring, only vibrate

    phone will not ring... only vibrate and I am missing calls... please help

    There is a switch on the left side of the phone, above the volume buttons. Flipping that will mute/un mute the phone. Also try pressing the volume up key a number of times.

  • Phone not ringing only vibrating

    Hi, my phone is not ringing for incoming calls, messages, emails, alerts or for the alarm.  Only vibrating.  I have checked the mute button, updated all sound settings, turned phone off and on again and reset the phone. Still no go.  Any suggestions?

    Nope, still not fixed just don't know the phone is ringning at all without looking at it.
    And if I try and ring out using the speaker phone option I can't hear the dial/ring tone when calling out.

Maybe you are looking for

  • Show custom Error message in MB_CHECK_LINE_BADI

    Hi to all! I'm using MB_CHECK_LINE_BADI to make some validation before posting the document. The problem is this: When I try to show an E message from a Z message ID, te message isn't shown correctly. For example: if sy-subrc <> 0. v_txt = 'ERROR'.  

  • Parallel table

    Hi What Disadvantages and advantages enable Parallel option in Table ? If I did it , do I must change My procedures ? Is This to improve performance ? Where can I to find examples about ? Thank you

  • Cannot view PL/SQL after upgrade

    Just upgraded apex from 3.2 to 4.1. When logging into the apex application, it lists all the PL/SQLs including functions, triggers, packages, and procedure. However, I am unable view them nor edit them no more in 4.1. Help. Thanks

  • Video Conversion Loss of sound II

    I know that this topic was covered for the most part. I have read the forum thoroughly and was amazed that I wasn't the only one who had this problem, the only difference is that im using Windows, the MPEG streamclip 1.5.1 only seems to be for MAC us

  • I have a problem with IOS6, theres no acces to wi-fi

    I have a problem with IOS6, theres no acces to wi-fi