My iPhone 5 doesn't want to restore.

It was overheating for some weird reason and I shut it down so it can cool off. When I tried to turn it back on, the Apple logo kept coming on and off in a continuos loop. After I attempted to restore, I got an error: "The iPhone could not be restored. An unknown error occured (2001)." I keep getting the same error after every attempt. I don't know what to do anymore and I think my phone is out of warranty. I just got it early January and I haven't had any problems with it til now. PLEASE HELP!
My iPhone is NOT jailbroken. I don't like my Apple products jailbroken.

Read
Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.

Similar Messages

  • When I Backup iphone 5s and i want to restore my photo but It doesn't work.How can I do friends thank for your answer

    when I Backup Iphone 5s and i want to restore my photo but It doesn't work.How can I do friends thank for your answer

    What do you mean it doesn't work?
    Are you getting an error message?
    ~Lyssa

  • What to do if iTunes doesn't want to restore my iPhone 4s and is keep showing message that error accrued 36

    What to do if iTunes doesn't want to restore my iPhone 4s and is keep showing message that error accrued 36

    Go further down on the same screen and look for more information. (I do not remember the exact words) Upon clicking on it a new page opens in Safari for instructions, including  opening Terminal under Utilities, etc. Then you will have to add # and a space to one of the lines. Then save and restart the computer. It worked for me. I am sorry I do not remember the exact sequence of these steps. Hope this helps you.

  • Hi. I brought a new iphone 5 and I wanted to restore it to one of my previous iclouds but it's not letting me - the icloud backup is a iphone 5 6.1 ios and my current is iphone 6.0.1 - please advise what i should do...

    Hi. I brought a new iphone 5 and I wanted to restore it to one of my previous iclouds but it's not letting me - the icloud backup is a iphone 5 6.1 ios and my current is iphone 6.0.1 ios - please advise what i should do...

    Hi ldyazch,
    You will need to set it up as a new phone, not from a backup, first. Then, after setup is complete, go to Settings > General > Software Update. Make sure you are connected to Wi-Fi and have at least 50% battery power. After then update downloads and installs, you can go to Settings > General > Reset > Erase All Content and Settings.
    This will let you go through the setup again, and this time you can choose your backup.

  • How can i fix my iphone 4 that doesnt want to restore

    how can i fix my iphone 4 that doesnt want to restore?

    I think you'd need to supply a little more information than that if you want help...
    At what stage does the restore fail?
    Are you trying to update the iOS?
    Are you getting an error code? Have you looked it up using the handy link?
    Have you tried rebooting your computer?
    Have you tried a different cable?
    Have you tried a different USB Port?

  • Updated iphone 5 and it want to restore and back up the phone i have done this 3 times, some advice please

    Updated iphone 5 and it want to restore and back up the phone i have done this 3 times, some advice please

    Hi Alan Parrock,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to restore the iPhone. I would recommend that you read this article, it may be able to help the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Cheers,
    Mario

  • I upgraded my iphone5 to ios7 when it got broken i backed up on iCloud before i got a new iPhone 5 now I want to restore the back up at the start up page and as iphone5 originally come with ios6 it is saying that my back up data isn't compatible

    i upgraded my iphone5 to ios7 when it got broken i backed up on iCloud before i got a new iPhone 5 now I want to restore the back up at the start up page and as iphone5 originally come with ios6 it is saying that my back up data isn't compatible

    thanks for your reply but if i upgrade the new phone to ios7 I will have to erase the Iphone to start again in other to get to the page where I have to chose restore from icloud, wont this process reverse the operating system back to ios6 or is that another way to restore other than erase and reinstall. pls help

  • TS3694 my iphone 3g doesn't want to make sync to the itunes

    my iphone 3g doesn't want to sync to itunes?

    I can think of lots of reasons why it might not be connecting, but since you don't give us any information at all other than the fact that you have a 3G, we can't even begin to guess...
    iOS version? iTunes version? Windows or Mac? Operating System? Direct to USB? USB Hub?  I'll give you a quarter for a clue...
    http://tinyurl.com/4x6cdgw

  • IPhone 4 doesn't want to be upgraded in 4.3.3

    I have an new iPhone 4. I want to upgrade this new device in 4.3.3... For the moment, iOs is on 4.3.1....It doesn't work... The message is:" this device isn't eligible". What's wrong?
    Is somebody have an idea about this question? Many Thanks..
    I use iTunes 10.3...

    Hey there Bianca Gabrielle,
    It sounds like you are getting the error code 50 when trying to sync your phone. I would recommend this section specifically from the article named:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694#error50
    Error 13, 14, 35 and 50 (or -50)
    These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
    Put a USB 2.0 hub between the device and the computer.
    Try a different Dock Connector or Lightning Connector to USB cable.
    Eliminate third-party security software conflicts.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. An incorrectly set default packet size can cause this error. Contact the software manufacturer that installed the packet-size modification for assistance. Or, follow this article by Microsoft to reset the packet size back to the default for Windows:How to reset Internet Protocol (TCP/IP).
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
    Try to restore from another known-good computer and network.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • My Iphone 5 doesn't want to turn on !

    My Iphone fell down, and then It started to dysfunction many times.
    It didn't stop to turn off, and turn on, then return off...
    And now It doesn't want to turn on.

    hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
    if that doesn't work take it to the apple store and bring some money with you an out of warranty iphone 5 is $269 U.S I believe.

  • Deleted a photo from iphone 2 months back. want to restore it from back up but i cloud backs up every day.when restoring showing me only recent yesterday's update and 2 more from 20 dec and 19 dec. how will i restore october 12 backup?

    I deleted a photo from iphone 5 in october. however, all files were backed up to icloud. now i want to restore my phone to an earlier date in october, but it only showed me back up made yesterday and 2 more back ups which were made 20th dec abd 19th dec. my phone backs up automatically. want to know how will i restore my phone to an earlier time back in october?

    Connect your iPhone to Computer.  On iTunes left Pane, under "Devices" right mouse click iPhone and select "Restore from Backup..." then select one of the three backup (Date and Time)

  • Iphone 4 doesn't want to turn on

    Hi ,my iphone 4 does not want to turn on it went black and its off now i've charged it for 30 hours now but it does not want to turn on !
    Please help !
    Thank you .

    HOld down the home button and the power button (The button on the top right of your device that powers it on and off) of the device for about 10-15 seconds and see if you see an apple appear; if not, attempt it two more times...if so you can let it go when you see hte apple.

  • My iphone 3g doesn't want to download apps..?

    My iphone 3g does not want to download apps, it keeps on asking me for a software update but when I do update it, itunes says the opperating software on the phone is the current version. My iphone is opperating on 4.2.1 & the massage that I get from the apps is that, they require the latest software version which is 4.3 & upwards...
    Please help me in anyway possible...
    Kind Regards...

    You can only download a compatible version if the developer chose to leave it available. This is not always the case.
    Unfortunately, if the steps in the article provided don't help, there is nothing else you can do to get new apps on your phone. You will have to purchase a new phone at some point.
    ~Lyssa

  • My iPhone doesn't want to restore on iTunes after crashing from updating to iOS 6.1.2

    I keep getting countless errors and I need my phone back up and running asap

    Well the phone was working fine just listening to music then it shut off completely and started relooping the apple logo. so I put it in DFU mode, connect it to itunes so that itunes can detect it being in recovery mode to be restored and updated. but after it was preparing for update I get errors 2001, then I would retry again and get 1600, I did recall getting 3014 when im doing the exact same thing over and over hoping it would go through with the process.

  • My iPhone doesn't want to restore what do i do?

    it says there was an error or something like that and a 1015 code but i don't get it. so what do i do ? i need the phone working by tonight if anyone can help me ASAP . thanks

    This article gives suggestions for various error codes:  Update and restore error messages:  http://support.apple.com/kb/TS1275

Maybe you are looking for

  • How to use single eventhandler for all menuitems...

    Hi all, I have a tray with a popup. Currently I have an eventhandler for every single menuitem. Is it also possible to provide only a single eventhandler for all of the menuitems and determine the clicked entry  with the event?? Tried to use paramete

  • How do I move from the 3/23 to the 6/28 iPod updater?

    I have an iPod that I got a couple weeks ago, which came with the 3/23 1.1.1 iPod software. I now see that there is a 1.1.2 version available, but the instructions on the web for moving to the new iPod updater are not very specific. Here are the inst

  • Recursive call of function module 'CRM_ORDER_MAINTAIN'

    Hi together, I have got the follwoing problem. We have to implement a proof on a partner function regarding the role. I found the BADI IF_EX_COM_PARTNER_BADI~COM_PARTNER_CHECK I implement the the follwoing coding:   IF is_partner_wrk-partner_fct = 'Z

  • .mov file loads into lightroom ok but crashes when playing

    Lightroom 4.1 QT player 7.7.2 is installed Window 7 H.264 HD video from Canon S100 camera .mov files plays fine in WMP First frame of video displays in LR library module.  In LR library view, click play.  Video advanced about 1 frame then hangs.  I g

  • Permanently mounted partitions displayed on desktop.

    I do want my removeable storage devices to be shown on my Gnome-desktop, but some of my entries form fstab(but not all) is also displayed. The problem, my fstab and output from mount is shown in this screenshot. It is /dev/hdc3, /dev/hdc4 and /dev/sd