My iPhone 5 doesnt ring!!!!

My iPhone5 doesnt ring

Did you check the side switch (mute) above the volume buttons? If you see orange/red dot mean it's muted.
Is you volume turned up?
Do you have a Ringtone assigned in Settings > Sounds > Ringtone?

Similar Messages

  • My iphone doesnt rings at the time of call,and it notifies me after the call is ended,is this any hardware error or should i change any setting

    actually smetimes i dint get any notification about new call,i mean it doesnt rings nor it notifies,and i get a miss call at the end of call and that also only light blinks..

    vickymanglani wrote:
    i press menu button
    You mean HOME button, right?  There is no "menu button" on any iPhone.
    Since you already said that the ring/silent switch is set to ring, check the following settings:
    Settings > Sounds > Ringer and Alerts > Volume slider set to loudest?
    Settings > Sounds > Vibrate > ON?
    Settings > Sounds > Ringtone > correct ringtone set?
    If the above settings are correct and phone still doesn't ring and vibrate, you need to do the basic troubleshooting steps AS NEEDED (described in detail in the User Guide):
    Restart phone
    Reset phone - press both home and sleep/wake buttons until the Apple logo appears.
    Restore phone in iTunes using a backup
    Restore phone in iTunes as new, without using a backup.
    If restoring as new doesn't help, there is a hardware failure that needs evaluation by Apple or whoever provides iPhone service in your location.

  • IPhone 3G 2.0.1 Doesnt Ring on Text Message

    Whenever I get a text message my iPhone doesnt ring, I've tried resetting the network settings and that fixes it temporarily, for about a day or 2. It is really disappointing I have to reset my phone everyday just for it to ring. I never had this problem with 2.0 or any of the 1.X versions on my first gen. I'm on EDGE (no 3G near me) with typically 3-5 bars

    this is by far the most annoying bug with the iphone thus far, i cannot for the life of me figure out what causes it. I have deleted all apps that would appear to gather info thru text including AP news and myspace and it still does it, i have tried messing around with fetch and push settings to no avail, i have had it where one text will ring and the next one wont, sometimes it will go a day and sometimes the first text after a reset will go silent, dont believe apple if they tell you they are unaware because i have emailed them 3 times about it. Im getting at the end of my rope and im about to call up someone and complain in an actual voice.
    I have owned countless phones and never have i had such a simple thing as a text ringer fail so wonderfully like this. I realize that there are bigger issues that need attention but at the same time this is an issue that shouldnt even happen, its like putting the cart before the horse, the phone does all this great stuff but we cant get a steady reliable ringer for texts

  • When bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone?

    when bluetooth headset is connected to iphone,I can't hear iphone ringing aloud when I have a call or a text. Do i really have to wear the bluetooth headset all the time in my ear to know when I have a call or a message? Why it doesnt ring through iphone but it rings through the bluetooth headsets?
    In other phones, you can hear the phone ringing and if it was connected to bluetooth, you could pick up the call from the bluetooth headset.
    Here with iphone, if its connected to bluetooth headset, it only rings through the headset, which means that if you dont have the headset in the ear all the time, you cannot know that you have an incoming call or message.
    Any ideas - solutions - comments please?

    I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
    I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece.

  • Instaled ios 7 in iphone 4 and the phone doesnt ring or vibrate

    instaled ios 7 in iphone 4 and the phone doesnt ring or vibrate

    I don't remember being asked for this during the install.
    You may need to contact Apple by phone and ask for help with your Apple ID security issue:
    http://support.apple.com/kb/HE57
    U.S. iPod, Mac and iPad technical support:
    (800) APL-CARE (800-275-2273)
    U.S. iPhone technical support:
    (800) MY-IPHONE (800-694-7466)

  • Iphone not ringing, clock not holding correct time and no wi-fi

    Man...I thought I had done something, but since the 2.1 update, my phone doesnt ring but for one or two random calls. The clock is also not holding time...it does if i restart the phone but within hours its back to hopping around, trying to get the right time. When it does stop doing that, the time is wrong.
    On top of that, it cannot find any wi-fi connections.
    Ive restored it to the previous back up and it doesnt do any of this.
    Is anyone else having these problems since the update?

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If those solutions don't work your iPhone 4s has probably developed a hardware problem. The permanent solution is to get it replaced.
    You can search the internet for heating and freezing solutions that might work (at least for a while).
    For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A
    Root cause: On some iPhone 4s devices there may be a flow soldering problem with the WiFi chip. After long periods of WiFi activity such as installing an iOS update (for example, iOS 7 or iOS 8) there may be a connection failure. A work-around to this is the procedure in the youTube video.
    A true hardware fix may be found here:
    https://www.ifixit.com/Guide/How+to+Fix+iPhone+4S+Wi-Fi+Grayed+Out/22167

  • My iphone's ringer stopped after suddenly yesterday what to do..??

    A week back my iphone ringer started buzzing when I played any audio or the ring and then yesterday suddenly the speaker stopped working completely. I shook my phone twice or thrice and it worked but then again it went off and my iphone became dumb now. It doesnt ring or play any sounds. What to do..??
    Thanks in advance.

    Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
    If this does not work, try to set it up as new device:
    How to back up your data and set up as a new device

  • IPhone 4 ringer doesn't work

    My iphone 4 ringer does not work! My phone does not ring when there is an incoming call. The mute button on the side is on ringer mode. All other types of audio works just fine like the alarm and music and game sounds. every thing works except the ringer. I've checked all of the ringer settings and it still doesnt work. Plus i think my vibrate broke around the same time as the ringer too so now im missing everything like calls, texts, and emails. Is this a hardware problem and is there a way i can get it fixed??

    I had the same problem, so I asked Siri why it doesn't ring.  She brought up search contents for the issue, and the first explanation solved the problem.
    I had inadvertently shut off the "sounds" switch on the upper left side of my iphone (when off, the switch shows an orange-red color).
    When I fliiped this switch to "on", and tested the phone w/ a phone call from my home phone, the ringer tone was heard loud & hear.
    Easy fix, thankfully!

  • Unlocked iphone wont ring only vibrates help!!

    i recently got a unlocked iphone still works fine but now doesnt ring only vibrates can any one help me??

    We do not help people with unlocked iPhones.
    Make sure the switch on the side is set to ring, go to settings and make sure the sound is up and ring is on and all.
    Other than that try to google a forum that deals with hacks.

  • My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help

    My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help

    Hello ashbyy123,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    2. Check the USB cable
    3. Verify that Apple Mobile Device Support is installed
    4. Restart the Apple Mobile Device Service
    5. Verify that the Apple Mobile Device USB Driver is installed
    6. Check for third-party software conflicts
    Have a nice day,
    Mario

  • Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it  started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with  +63 ..what will i do?

    Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it  started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with  +63 ..what will i do?
    I change everything into +63 and i thought everything is already fine,.. and then now , i dont know what happened why it doesnt recognize numbers with +63 anymore

    Hello hsielglad,
    Thank you for your question. iTunes 11.1 is required to update to and sync with iOS 7.  If you are still running iTunes 10.6.3, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
    iTunes: How to install the latest version
    http://support.apple.com/kb/HT5654
    If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
    Download iTunes
    http://www.apple.com/itunes/download/
    Once the file downloads, double click on the installation file that downloaded to initiate the installation.
    Best,
    Sheila M.

  • IPhone doesnt show in iTunes after update to newest version from 8.0

    Yesterday evening i update iTunes and then go to bed. Today when I want to sync my iP witch iTunes iPhone doesnt show! But tomorow it worked. I tried to repair, then uninstall and then install again iTunes, but it doesnt help. I dont know what to do, pls help me. And sry for my english :-/

    Hello, Welcome to discussions.
    You may wish to check out http://support.apple.com/kb/TS1495
    Quick tips
    *Reboot computer, connect iPhone again and see if it shows up in iTunes
    *Connect iPhone to the different USB Ports to see if another port provides more power to the iPhone to allow it to be seen in iTunes
    *Download and Update all Windows updates and computer updates from computer manufacture
    *Try not to connect iPhone to a USB Hub, Keyboard USB connection, or USB Extended cable
    http://support.apple.com/kb/HT1430

  • I erased all content and settings from i phone because my dad gave it to me i press and hold both buttons i conected it to the itunes but it tells me its not available and my iphone doesnt open what shall i do?

    I erased all content and settings from i phone because my dad gave it to me i press and hold both buttons i conected it to the itunes but it tells me its not available and my iphone doesnt open what shall i do?

    Do you have a SIM in the phone? A SIM is required to activate the phone.
    If you do, ask your dad if the phone was jailbroken or hacked to unlock it.

  • IPhone 3GS rings after 5 seconds

    This is very weird and it happens to my iPhone 3GS and my sister's 3GS. So when someone calls the iPhone, it doesn't ring immediately. It actually takes at least 5, sometimes more seconds to ring. This is a lot of time and I miss important calls. Both phones are FACTORY unlocked and work on T-Mobile but it's the same on AT&T so it's not provider's issue since other phones don't have this problem. I saw a lot of people have had similar problem. Does any one know if I can fix this? It's definitely not a defective phone it's just the way it is with the iphone and I don't have any idea why it takes 5-10 seconds before it starts ringing

    Botev1912 wrote:
    Let me explain this again. It doesn't go to voicemail quickly. Imagine phone 1 and phone 2. I make a call from a phone 1, wait 5-6-7 seconds and phone 2 (the iPhone) starts ringing
    Let me see again if I understand what you are saying. When do you start counting these seconds? Is it from the first time you hear a ring in your ear on the phone you are calling from? I've had a number of phones, and I know that calls need setup time, generally a little more than landline phones. I know in a later post you mention a Nokia only taking < 1 second. You also say it is not going to voicemail too quickly. I guess my real delemia here is, how are you missing calls if they are not going to voicemail. Do they just quit ringing because the person on the other end is hanging up? How long are they waiting, or in your case, how long did it ring before it went to voicemail before you hung up on your test call, I guess the question is how many rings. I'm not understanding why this delay in the beginning of ringing is troubling you if the calls is not being rerouted to voicemail, therefore impacting your ability to answer it.
    The standard troubleshooing steps are power off/on the phone, if that doesn't help, then a reset, holding the power and home buttons together until you see the Apple logo, then releasing, ignoring the slide to power off screen. The next step is a restore, first from a backup, the next as a new phone or not from backup. The next step is outside of user troubleshooting and that is to send or take it to Apple, however since you purchased these units in England, that is where you would have to go for service, since the iPhones are serviced in the country they were sold in.
    Hope one of these help.

  • The iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger

    the iphone has been acting weird. my iphone doesnt charge whenever it is switched On. When I switch OFF the phone, it charges for 2 mins then comes back On and stops charging. I dont know what the problem is. trust me, the problem isnt from d charger. PLS anyone with any solution

    @wetdro
    If your device has been jailbroken during the warranty, Apple will not service it.
    Maybe you missed that in this article:
    Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
    Apple strongly cautions against installing any software that hacks iOS. It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.
    copied from Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…

  • Iphone doesnt find Bluetooth speakers.!

    My iphone5 doesnt connect to my bluetooth speakers. Ive tried in the setting and it still wont! My ipodtouch does but my iphone doesnt and i already dissconnected thebluetooth from my ipodtouch. Help a girl out please.

    Hi, aivilo. 
    Thank you for visiting Apple Support Communities.
    Sometimes the issue may simply be resolved by placing the accessory in pairing mode.  However, when experiencing issues with Bluetooth connections, here are a couple articles I would recommend going through.
    iOS: How to troubleshoot Bluetooth connections
    http://support.apple.com/kb/TS4562
    iOS: Third-party Bluetooth accessories
    http://support.apple.com/kb/ht1664
    Cheers,
    Jason H.

Maybe you are looking for

  • Down Payments Error: Account type K is not defined for document type DZ T

    I am getting the error message: Transaction code: F-29 Account type K is not defined for document type DZ      Message no. F5243 In this case i am trying to post a customer down payment in t.code:  F-29. In the document type DZ in OBA7 we tick only G

  • Edit changes do not show in the photo as they are made.

    I'm using the trial version of Aperture 3 trying to edit my photos. I've imported them by leaving the originals where they are on my HD. When in the edit mode the changes do not appear in the photo. Nothing happens. I assumed I would see the changes

  • Import/export - Windows Mail to Mac Mail

    Does anyone know a way to import Windows Mail mailboxes in Mac Mail. I managed to import Windows Mail in Thunderbird, but when I export them to mbox it seems like Thunderbirds is only exporting one mail from each mailbox. Is this the only way to Expo

  • Bizarre: iTunes skips importing Track 1 on ALL discs!

    I am having the strangest, most frustrating problem: I have been importing my large music CD collection and midway through, I have noticed that the first track of EVERY disc has NOT been copied to my library. The remaining tracks (Track 2 and up) wer

  • PO Acknowledgement from SUS

    Hi all, I am implementing MM-SUS scenario. I have replicated the vendor and I am able to send PO and change POs to SUS. When I try to send the PO Acknowledgement from SUS, I get the following error: "HTTP_RESP_STATUS_CODE_NOT_OK". Any ideas on how to