My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to display the data?

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?

Hi Gazpan,
Thanks for visiting Apple Support Communities.
I recommend using the steps in this article to back up your iPhone if possible:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
You may also find this advice helpful for your situation:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
If you no longer have your iOS device
If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
Cheers,
Jeremy

Similar Messages

If my phone is broken and not insured but still under one year old. Can I go to an apple store and get it replaced with a new one?

My lock button has stopped working and need to get it fixed. Would it be possible if my phone if not insured but still under warranty to go to an apple store and get it replaced with a new one? Or do you have to be insured?

The iPhone has a one year warranty. So you should be able to get it replaced free unless you damaged it. You can check the warranty status here: https://selfsolve.apple.com/agreementWarrantyDynamic.do
Make an appointment at the local Genius Bar ahead so you won't have a long wait. http://apple.com/retail and click on Genius Bar.

Is there a way to display the date and time on my officejet 6500

HP Officejet 6500a Plus Windows XP_ Is there a way to display the date and time on the display of my printer

Are you referring to the Date and Time some cameras put right on the image? If so there is nothing really good in iPhoto to do this. You could try the Retouch tool and see how that looks but I think you will need something more precise and powerful, like the clone tool in Aperture.
Also something like PhotoShop or GIMP - The GNU Image Manipulation Program (free) should do what you want also.
If your asking about some other date post back.
regards

Is there a way of displaying the various item in my Downloads folder as icons arranged in order of Date Created, such that the most recent items appear at the bottom, rather than the top?

Is there a way of displaying the various item in my Downloads folder as icons arranged in order of Date Created, such that the most recent items appear at the bottom, rather than the top? I know this can be done when they are displayed as a list, but I want icons!

Hi geezer,
when you open your 'Downloads' folder choose 'View' in the Menu bar and choose:
'as List'
'Show View Options'
In 'View options' window you tick:
'Always open in list view'
'Date Modified', or
'Date created'
Now inside the 'Downloads' folder click on 'Date Created' (or 'Date Modified')
column to get items alined from oldest to newest date (or reverse)…

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN

If meta data LUN is totaly destroied , is there any way to rebuild the data from the video LUN ????

What happened to your metadata? Are you sure the metadata is gone?
In theory, file carving could be attempted on the data LUNs, but you would need a tool that understands how Xsan lays out data across LUNs in a stripe group and hope your fragmentation isn't too bad. I doubt such a tool exists, but if one does it almost certainly is not publicly available. You should probably contact a data recovery service with experience recovering data from Xsan. Do that before you do anything else if this data is really important.

Is there a way to display the coordinates(x,y) of the objects automatically ?

hi and happy new year
is there a way to display the coordinates(x,y) of the objects automatically (may be on a label over the object ) and print them?
i mean i want to design a game level (in pixels) place the object on the map ang get the locations automatically to print them
thank you
txarly

Good day!
Which version of Photoshop do you use?
If you have CS6 Etended the Measurement Log might provide some options to store and print the information separately, but if I interpret your wuestion correctly (for example that by »object« you mean »Layer«) I think a Scripting approach would be best.
Scripts can be used to automate tasks with more options regarding conditionality than Actions by using JavaScript-, VB- or ApplaScript-code to control Photoshop.
If you want to pursue that option you could ask for help over at
http://forums.adobe.com/community/photoshop/photoshop_scripting
or
http://ps-scripts.com/bb/
But please post screenshots/mock-ups right away to illustrate what you start with and what result you want.
Regards,
Pfaffenbichler

Is there a way to display the song timing/duration?

I have a new 6th generation iPod Nano. Is there a way to display the song timing? Sometimes I want to fast forward to right at the end. I guess I miss the click wheel when I could zoom right to the end without just holding down the arrow and guessing about when I'd get there. Is there a way to access this function on the new nanos?

You're welcome. You can find the manual for the 6th Generation Nano here: http://manuals.info.apple.com/enUS/iPod_nano_6thgen_UserGuide.pdf

I have an old iPhone (3s) that I've now replaced with a newer one. I would like to use the old iPhone in the same way I do an touch. When I plug it into my Mac laptop, there is no recognition on my computer of this old iPhone. What can I do?

I have an old iphone that I've replaced with a newer one :-) and I'd like to use the old one in the same way I do an itouch. When I plug it into my Mac laptop, there is no recognition of it as a device. Help! What do I do????

http://support.apple.com/kb/ht3406

Is there a way to display the legend for a chart, but not the chart?

Hi,
I have a stacked column chart and a line chart on top of each other. I can't use the legend for the stacked column chart because the data will change from month to month, and the 2 charts will not be aligned. I copied the stacked column chart to another part of the canvas and want to display only the legend, but the chart is still displaying. Is there a way to prevent the chart from displaying? Thanks.

hi Jim Wojewnik,
we can show only the legend in a pie chart by dragging the edges to closer.do the following,
select the pie chart,select the edge of the chart and make it small and u ll find the pie chart shrinking.make it lean such that the pie chart disappear.
try this work around and let me know.
regards,
ravi.

Is there a way to display the time-code of all tracks?

I bumped some audio out of sync. Is there a way to display all my audio and video time-codes simultaneously, so that I can see if my tracks are out of sync, and by how much?

You could link video and audio tracks in the timeline
that you want to stay in sync with each other.
Link or unlink video and audio
Once video and audio clips are linked in the timeline, you can
view the offset in frames if you happen to accidentally slip the sync.
There are a couple of automatic methods for recovering lost sync in
linked clips.
Automatically synchronize clips that were moved out of sync

Is there a way to display the size of a folder or group of folders in Bridge?

In windows it is easy to click on any folder and see the size of it's contents, whether it is a single folder or contains subfolders. This doesn't seem possible as far as I can see in Bridge. The only way I can see to see the size of a folder is to select all files in the folder and then it will display the size. Seems quite a clunky way or working and is frustrating when you want to see the size of a folder containing sub folders. Strange for a program which is supposed to make managing files easier. However, I'm hoping that there is a way to do this and I've not discovered it yet.
If anyone knows of a way to click on any folder and display it's contents (with or without subfolders) without having to select all files, I would greatly appreciate them sharing it.
Many thanks,
Julie

In the Folders Tab, right click on folder then click Reveal in Explorer. This will open an Explorer window with the folder selected. In Explorer you can right click > Properties or navigate to whatever you want to measure.

Is there a way to display the file location in iTunes?

I have several external hard drives connected to my windows PC. Over time, I have copied my music files (some I have ripped from CD's, and some I have copied from a friend's external drive) to 3 or 4 different locations, each of which is on a separate external drive. Now, iTunes has gone out and pulled all of those files into my music. As a result, I have 3 or more copies of many songs.
The only way I can see where they are located, as far as I know, is to right click on each song, go to Get Info, and look at the "WHERE" box at the bottom of the window.
Is there a way for me to set the file location up as a field in iTunes? What I want to do now is to move all of my music to one location, then delete duplicates, before backing the entire library up.
Thanks in advance for any help you can give me!

I use CoderPlus workspace & tabbed panels. For me, the file url is on the far right side. See screenshot.
If you click the "Page Icon" in upper right corner to tile, the URL shows on the left side.
Nancy O.

Is there a way to display the number of pictures or photos in a smart album

when I look at my project view on the left, all of the projects or folders show the number of photos that are in them at a glance. However, on my smart albums, it just shows the looking glass which you can click on to edit the properties. Is there any way for aperture to show the number of photos in a smart album without having to open the smart album and count? Thanks!

No. But when you click on them, the number of images they contain will be at the bottom of the Browser screen and in Split View just above the bar separating the Viewer from the thumbnails.

Is there a way to display the location of an event?

I would like to display the location of an event in the appointment itself. Anyone know how to do this? Is it as simple as just putting it in the title instead of the event field?
Thanks,
Vinnie

The only things you can get to display in the calendar view are the title and time. Therefore, if you put the location in the title, it will be displayed.
Andrew T.

Is there a way to display the actual time footage was shot?

I have two cameras I used for footage and they are not continuous so I need to find an easy way to quickly get the footage close to where they need to align. It would be great if there was a way to display that actual time of day in hours/minutes/seconds based on the cameras clock instead of just timecode, which doesn't give my much of a reference of the camera's time. Does anyone know of a way to display camera time?

There is a somewhat tedious workaround that will help (perhaps, since I don't know what your footage is).
Load in all the clips you plan to use in your edit. Select them one at a time and click File\Timecode and type in your "time of day" clock timecode and Set at Beginning. Click OK.
This will then change the Media Start from 00:00:00:00 for every clip to whatever you type in.
If anyone finds, or knows of, a way to do this automatically, I'd be very interested to hear about it!
HTH,

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to display the data?

Similar Messages

Maybe you are looking for