My iphone 5 has frozen on connect itunes screen while updating on my pc
Hi everyone , How do i fix this problem ? i plugged my iphone 5 in to my laptop and then clicked the pop up saying update you ihone .. after coming back to my iphone 5 min later i exited out of a pop up message without reading. that message could of be telling me it has not completed update and go back to normal but i dleted it. now my iphone is frozen displaying the itunes connect scren.
Thanks
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.7.0.21
QuickTime 7.7.1
FairPlay 2.2.19
Apple Application Support 2.2.2
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.0.0.59
Apple Mobile Device Driver 1.62.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number ****
Current user is not an administrator.
The current local date and time is 2013-06-25 20:39:54.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., Radeon (TM) HD 6770M
ATI Technologies Inc., Mobile Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 10.7.0.21 (x64) is currently running.
iTunesHelper 10.7.0.21 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Renesas Electronics USB 3.0 Host Controller. Device is working properly.
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C26. Device is working properly.
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPhone running firmware version 6.0.1
Serial Number: F1*******TWG
<Edited By Host>
Similar Messages
-
I am using a 3GS iphone. While attempting a download of the new OS IO6 my phone has frozen on the itunes screen. When i attempt to restore I get the Error code 1611. This happens on different laptops. I've followed all the given resolutions with no change.I am using a 3GS iphone.While attempting a download of the new OS IO6 my phone has frozen on the itunes screen. When i attempt to restore I get the Error code 1611. This happens on different laptops. I've followed all the given resolutions with no change?
If you are having the same issue on several computers then it is a hardware issue! Not a software issue! Replacement is the only resolution!
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne -
Itouch froze on "connect to itunes" screen while updating
Itouch froze on "connect to itunes" screen while updating from 5 to 5.01, what to do???
It happen to me several times, I just simply wait until it is out of battery and connect it to my itunes and it will show up in my computer. if the problem cannot be solved in this way, you can connect it to computer after several days of running out of battery and it may work. I know it is a little bit stupid idea,but it did work on my itouch
-
iphone 4 has no service after replacing screen and updating, phone company says sim is fine. any ideas? thanks
We had this happen with a ipad mini, took it back to person who worked on it, after a week with trying to get it working again, he replaced it. I will agree with the other replies take it back to repair place there must be something inside the phone that if you don't do repair excalty right it messes up all phone functions. Also I would give the repair person a time frame to either get it working or replace it.
-
My iphone 4 has frozen, just showing itune icon and connector ?
my iphone4 has frozen it is just showing an itune icon and connector ? how can I unlock this ?
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
My iphone 5 has frozen on a blank screen
my iphone went blank now has just frozen on blan screen but still keep getting messages though
That is the problem it will not turn off. First thing I tried was to reset with the home/power button. Have decided will need to take to phone store tomorrow.
-
after an update my iPhone 4 has frozen with just the apple screen visible. I have tried connecting to iTunes but now iTunes isn't locating my iPhone. I have tried reseting the phone several times and that isn't working. Any ideas?
Try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes.
-
My iPhone 3gs has frozen while doing update 5.0.1 I think it was. All it shows is the iTunes logo and the usb cable on the screen. I will not turn on or off. I have tried reconnecting to iTunes but nothing happens. Have held both buttons for 10 seconds etc and nothing is working! What can I do?
Here are Apple Steps: http://support.apple.com/kb/HT1808
-
my iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?
Place the device in DFU mode and restore.
-
My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on again. Has anyone else experienced this problem and if so, is there an easy fix. I have been advised by Apple that the latest IOS update may overcome this situation but I'm only on slow download speeds and 690 Mb would take forever. I would appreciate any advice.
Best regards,
Rob.PinguXeF wrote:
, while I have taken a backup of the iTunes Library,
this means nothing if it was not done correctly...
To have EVERYTHING on a New Computer...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751 -
My iPhone 3Gs has frozen and I can't do anything except turn it off by hard boot. When I plug it in, I have the apple icon and that is all. It was at 43 percent battery life when it happened and my Twitter app was giving me problems. Thoughts?
Put it in recovery mode and restore it as described here: http://support.apple.com/kb/ht1808.
-
how to restore ios on iphone 4s? when I connecting itune after extracting it sows can not restore. error (21). how to solve this problem?
how to restore:
http://support.apple.com/kb/HT1414
error code 21 fix
http://support.apple.com/kb/TS3694#error1015 -
I have iphone 5 but can't connect iTunes
I have iPhone 5, but can't connect iTunes.
My type of iPhone model ND300ZP/A, model on back iPhone is : A1429 (GSM & CDMA).
Serial Number : DNPJC0C6D***
I use win 7 sp 1
error when connect windows :
iphone 5
I need solution for it. Please, i want to upgrade to iOS 6.1.4.
Thank you.my iphone4 detect by my pc windows itunes
when i try connect iphone 5, this the pic of iphone
I am confused, for find the solution. Please... -
my iphone 4 has frozen to the screen with the apple logo and progress bar below it just after the ios 7 update, please help
Thaw it out.
Just kidding. Hold the home button and the on/off switch simultaneously, past the prompt to turn off and let go only when you see the Apple logo. This can take ~20 seconds. -
Iphone 4 has frozen how do i fix it
My iPhone 4 has frozen whilst resetting. How can I fix it?
Thanks very much for your very helpful post, Chris. Today my iPhone 3GS froze just after I took a photo. Pressing the sleep/wake button or the home button got no results. I went by the Apple Store, but couldn't get an appointment until tomorrow. The scheduler at the store offered no suggestions. After I got home, I found your suggestion about pushing the sleep/wake button and the home button simultaneously. Viola! It worked. You're the genius! What a simple solution to a scary problem. I wish all troubleshooting efforts with electronics were that easy and that successful! Many thanks.
Maybe you are looking for
-
Hi, I have two DSO's with data like eample below DSO1 Contains Doc No Doc Date Customer No 100001.....01/01/2012.......5000 100002.....01/02/2012........5001 100003.....01/03/2012........5002 DSO2 Contains Doc No Item Doc D
-
Capitalization of AUC investment measure to asset
Hi, I created a project and then settled corresponding WBS elements to AUC investment measure using CJ88.After that i am not able to capitalize to final asset.Please help me in procedure as I am not able to settle using normal line item settlement A
-
Can you use Sub-Forms in FormsCentral
I'm developing an inspection report form and would like to make it dynamic by alowing the user to delete sections of the form that do not apply to the site.
-
Editor Auto-Selects Text Won't Edit CS4
Hi, I dunno what I did, but after 2 happy years with CS4, the editor has started doing something very annoying. Probably a stupid thing -I- did but I can't figure it out. When I open a document, the cursor struggles to auto-select either an entire 'b
-
Unable to establish two way communicat​ion with this device
I have an HP Officejet 6500A Plus E710n-z. When I try to check the ink levels, it gives me this message on my computer. It used to work, but now it doesn't. My husband's computer is also hooked to this printer, and he cannot check the levels either.