My iphone 5 has started to have a problem controlling the volume with the buttons on the side? How to fix?
It started like 3 days ago and first it was just my (-) decrease volume button but now its both.
Also,
Like I read in many other posts I'm starting to have Wi-Fi trouble.
Known networks that were no problem recognizing and connecting to automatically with IOS 7.0.2. and downwards are starting to have trouble. Network not found or when found a connection is not made automatically.
Also then trying to connect manually is a problem, as the network jiggers / flickers between the upper Wi-Fi connection field and the field 'known networks'....
So I point near the network with my finger I want to connect to al the time....
Normally this kind of thing is funny and I can laugh about it.
But now I wish I could downgrade to IOS 7.0.2...
Similar Messages
-
My iPhone 3Gs has started crashing when using apps once the battery gets down to around 80%.
My iPhone 3Gs has started crashing when using apps once the battery gets down to around 80%. Sometimes it will reboot on its own, and other times you have to leave it for an hour or so and then manually turn the phone on again. Any ideas?
Did you try to reset the phone by holding the sleep and home button until the Apple logo comes up again?
If this does not work, try to save as much data as you can and set it up "as new device": How to back up your data and set up as a new device -
Hi my iphone 5 has started recently to operate voice control all the time
why is my voice control activated all the time?
Have you jailbroken the iPhone? If so, you will need to restore it to factory defaults to undo the jailbreak, and then never jailbreak it again.
If it's not jailbroken, there is no known malware capable of infecting it. So the problem lies somewhere else. Convincing your carrier that it's not a virus, and is a problem somewhere with their system, will likely be difficult. You may need to restore it to factory defaults to get them to pay attention, and even then they may fall back on some nonsensical argument about malware in your phone's firmware in order to dodge their responsibility.
If I had to guess, I'd say that someone is probably spoofing your phone number when sending texts. Your carrier ought to be able to track that down, if you can convince them to try. -
For example, when I open the "System Preferences", the task opens but locks up and my mac sits polling on something. The little rainbow coloured thinking wheel just turns and turns until I force a quit. The second time I attempt an open, it is always successful.
This is starting to happen with various applications. They spawn but then lock up seemingly looking for something that isn't there in the first instance but which seems to be created after the forced close.
Some applications don't get as far as the thinking stage. After double clicking on an app icon, they graphically expand but nothing happens.
Any thoughts? Cheers in advance.Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao. -
After working fine for several months, my iPhone 5 has started dropping bluetooth connectivity for 2 to 5 seconds at a time with my Sony MDR-1RBT headphones. The headphones work fine with other bluetooth devices. I haven't moved to iOS7 yet. Any ideas?
What user troubleshooting have you done on the phone? The steps are restart, reset, restore from backup, restore as new. Understand that a restore will put the latest iOS on your device. It is also possible there is a hardware fault on the device and the Bluetooth is failing. Anything is possible given the scenario you describe.
And as far as iOS 7.x is concerned, we have 5 different iPhones here at home, all with the latest iOS, a 4, 4s, 5c, and 2-5s and all are working just fine. So, a blanket statement such as the one provided by the other poster is not completely true. Others are not having any issues at all either. -
iphone 4 has a black scrren which will display the apple logo and appears to be at start up but then blacks out for approx 10 seconds and then displays apple logo again. Same action over and over.
I have attempted hard reset but cannot complete. Also attempted to connect with itunes and it does not recongize device.
Device is frozen in this display loop. Have an appointment with genius bar tomorrow but it's a 2.5 hour round trip so suggestion appreciated.Your device may need to be restored as new in iTunes (instead of restored from a back up as it seems that there is a software issue on your phone).
If your phone is not able to connect in iTunes try forcing recovery mode (http://support.apple.com/kb/HT1808)
* power off your phone.
* Hold the home button while connecting your phone to iTunes. You should see the connect to iTunes window and your computer should give you the recover mode alert.
*Restore your device as new. Being sure not to restore from a previous back up.
You will then want to sync your information back to your device from Outlook, iCloud, Google or wherever your information is stored. -
My iPhone 6 has started getting really hot when I am on the phone. Any thoughts?
My iPhone 6 has started getting hot when I make calls. It does not do this when I am using my apps. Thoughts?
Oh no! I know that the iPhone 6 is one of the hottest smartphones but I didn't mean literally! Let's cool things off with your phone. Have you adjust your setting to extend battery life? If not, here's a link to check out, http://apple.co/1xnEkjF. Also, do you close out the apps that are running in the background to ensure proper resource management? Here's a link on how to do so as well. https://support.apple.com/en-us/HT5137. Once you have done so, please retest & keep us posted.
Thank you…
ArnettH_VZW
Follow us on Twitter @VZWSupport -
Since i update my iPhone 5 with IOS 7.0.2, I start to have serious problems to call or receive calls from other telephones: is not possible to open the call at the first try. Somebody have the same problem?
Try
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data -
Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB" (usb device tree)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x18
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
Hub in Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1002
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version: 1.00
Bus Power (mA): 100
Speed: Up to 12 Mb/sec
Manufacturer: Brother
Product ID: 0x0008
Serial Number: L9J286292
Vendor ID: 0x04f9
Basic Optical Mouse:
Version: 0.00
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Microsoft
Product ID: 0x0084
Vendor ID: 0x045e
Apple Pro Keyboard:
Version: 1.22
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x0204
Vendor ID: 0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version: 0.0e
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Imation
Product ID: 0x0002
Vendor ID: 0x0718
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0026
PCI Revision ID: 0x0000
PCI Vendor ID: 0x106b
Bus Number: 0x19
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f
LaCie d2 DVDRW USB:
Capacity: 451.76 MB
Removable Media: Yes
Detachable Drive: Yes
BSD Name: disk2
Version: 0.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: LaCie
OS9 Drivers: No
Product ID: 0x1011
Serial Number: FFFFFFFFFFFF
S.M.A.R.T. status: Not Supported
Vendor ID: 0x059f -
My iPhone 4 has started to delete the content of messages automatically as soon as I open them and is also changing some of my contact names from their names to their email addresses. Help!
I've had the same problem with the names being changed to email addresses.Did you ever find out how to stop this ?
-
My iPhone 4 has lost SIM connection several times over the past week when the phone is left on continually. I have had the SIM checked and it was not the source of the problem. I have found that I can reactivate the SIM by switching the phone off and on again. Has anyone else experienced this problem and if so, is there an easy fix. I have been advised by Apple that the latest IOS update may overcome this situation but I'm only on slow download speeds and 690 Mb would take forever. I would appreciate any advice.
Best regards,
Rob.PinguXeF wrote:
, while I have taken a backup of the iTunes Library,
this means nothing if it was not done correctly...
To have EVERYTHING on a New Computer...
From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751 -
My Ipod classic has started to play mono only through the headphones. I have tried different headphones with the same outcome. Is the device repairable or better to upgrade?
Hey Grimeymouse,
Thank you for contributing to the Apple Support Communities.
It sounds like your iPod classic is only playing sound in mono when using multiple headphones.
Since you've likely isolated this behavior to the iPod by trying multiple headphones, see this advice from the "The headphones don't work" section of the iPod troubleshooting basics and service FAQ:
If the issue appears to be with the iPod, try resetting it. If that doesn't work, then restore iPod with the latest iPod software using iTunes 7 or later.
All the best,
Jeremy -
My iPhone 5 has started to take small resolution photos
My iPhone 5 has started to take small resolution photos (640x852) using the standard camera app (back camera, not the low res front camera)), how do I get back to the original large resolution photos it used to take? Thanks Natasha.
Problem solved, see post:
https://discussions.apple.com/message/27869012?ac_cid=tw123456 -
Since yesterday my iphone 4 has started to freeze intermittently when unlocking. When it happens nothing happens (left it for an hour last night) until I reset the phone, but it's done it 5 times today. Never had this prob before. Any thoughts?
I had the same problem (freezing iphone when trying to unlock) today.
1) I made a backup of my iphone using itunes.
2) Went to my service provider and made a sim swap. So, I think there was a problem with the nano simcard.
Problem solved. -
I have a iPhone 4S it started to have no sound
Can anyone help me ? I have an iPhone 4S it started to have no sound coming out what can I do ??
iOS: Not responding or does not turn on - Apple Support
try this but maybe terminal if no result
Maybe you are looking for
-
How do I free up 'Other' Space on my iPod Touch?
So I just bought an 8GB iPod Touch 4 today, and while syncing my music and downloading apps, I noticed there was a chunk of space called "Other" on my iPod (Shows in iTunes) That takes up a large 0.9 GB. Since my iPod is an 8GB and I want to keep the
-
Hi experts, I met the problems bellow : 1. To payment term restriction because the payment terms in Sales Order --> Accounting --> Payment Terms is always change if users filled in Payment Term. How to restricted it ? 2. How to set in PLD to differe
-
Compiling EJB files and Deployment Discriptor
Hi, Could any body tell me step by step process of compiling EJB files and building deployment descriptor. I want to learn from scrap. I search on web but not found material that I need. Actually I've made a simple EJB example now I want to compile a
-
Cannon printer compatible with Mac!!!Please Help Me!
Hi! I recently bought a Cannon MP160 multifunction printer, and I just made the installation with the CD that comes with the machine. Now, when I try to add the printer to my MAC, it doesn't appear in the little window . I just want to know if this t
-
NICAIU.DLL error on DAQmxRegisterEveryNSamplesEvent
Hi all, I have prepared a DLL (CVI 8.1) for use in TestStand (3.5) to sample digital inputs triggered on a single port bit (NI6254). It should run for a given time - I call it monitoring and it's done in the background while TestStand executes furthe