My iphone 5 is coming up with a warning everytime I plug it in to say that the cable is not authorized, (and is not charging). I am using the cable that came with the phone!
I have tried using my daughter's iphone 5 cable, also original from apple, and it is doing the same thing!!
I had no trouble until today! I undated to OS7 about 2 weeks ago.
any suggestions?
We aren't Apple, just users like you volunteering to help other users with problems. Threatening to go to Samsung doesn't mean anything to us. What troubleshooting have you tried so far?
Similar Messages
-
For about 2 months I have been having problems with pages that require Flash when using Safari, I also have a strange small yellow warning box that flashes on my screen, but I cannot read it before it vanishes. I think I may have a virus, what should I do?
I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
since I upgraded to the new operating system my charger no longer works...
It says"this cable or accessory is not certified and may not work reliably with this iPhone"Try checking your cable socket/lightning cable for dirt, grime, pocket lint, etc. I could not find the solution to this issue myself and after much searching I found someone stating that cleaning this out helped them immensely.
After taking a wooden toothpick (making sure the phone was OFF first) and gently clearing out the edges and inside of the lightning socket this went away.) It is worth noting that I had a significant amount of dust or lint buildup along the edge rails which I think was causing the iphone to believe it was plugged into something when it was not.
Try it and see, ensure you are very careful and do not use any conductive tools to clean the area in question. Compressed air also does wonders here. -
Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
Maps took me to the completely wrong side of town for a long standing business in town.Hello margmcarlson,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
Best of luck,
Mario -
Why does my phone keep popping up messages "This cable or accessory is not certified and may not work reliably with this iphone" when there is no cable connected? This has been happening since IOS7 was installed and has become worse with 7.1. I have reset the phone several times with no change.The phone charges properly & I have never used anything but an Apple Lightning cable.
I already cleaned the port with compressed air before submitting the problem. I since cleaned it with a toothpick and dug out some more lint. this seems to have just about fixed the problem since I have only had the error pop up 3 times since then and i was getting the error constantly before.
-
Please help me eliminate this repeating warning message on my iPhone 5. It occurs several times a minute. I am only using Apple devices, so the warning is in error. "This cable or accessory is not certified and may not work reliably with this iPhone."
The cable may be damaged. Try another cable.
Make sure it properly connected at both ends. -
Problem with replies in Maverick's mail. Originating emails send fine. When replying to an email (various addresses) the reply is hung up and can not be sent. Option becomes put in draft, delete, etc. Any suggestions would be helpful. Mid 2013 iMac.
I don't know how rare this is. I went a week or so without a problem, and now it's starting to recur. Also, in some instances, an email will look unsent (remain in the outbox on the Treo), but it has been sent, and recipients are replying while I'm trying to figure out what is going on. Further, it will send the same email over and over during this madness.
This is a show stopper. If there isn't a software fix soon, I may chuck this phone in the garbage.
Post relates to: Treo 800w (Sprint)
UPDATE: The problem comes and goes. The next day, no changes to the treo, everything workeds. Now i'm suspecting the sprint server, and how it/the phone responds from failing to send while roaming. I've since turned off roaming, and haven't had a problem for several days.
Message Edited by slrichardson on 12-22-2008 01:12 PM -
I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?
try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard) -
I just recently purchased a mini iPad for my child. It was set up in the Apple store with my Apple id. I now want to create an Apple id for my child and switch it over, how can I go about that. I already downloaded some of the games from my account.
With a new account, you'll need to rebuy the games.
Each user should have their own icloud account, otherwise they end up getting the same emails, contacts, calendars, notes, reminders, etc. - usually not what you want. But if all have been sharing the same itunes ID, keep it that way, you can have different IDs for itunes and icloud.
If you already have another icloud account, and want to set it up on a device, then go to Settings>icloud, scroll to bottom of screen and tap Delete Account. This only disconnects the device from that account, no data is lost on icloud. Then enter the account ID that you want to use.
To create a new icloud account, go to
http://www.apple.com/icloud/setup/ -
Can somebody help me install IOS 6.1.3 back to my iPhone 4. IOS 7 or 7.0.4 is not smooth enough as perfect as IOS 6.1.3. I am stuck with this OS, every app gives a break for 4-5 seconds to open up. And playing games in this OS using iPhone 4 is really crazy. Very much disappointed that I am not able to use IOS 7 and cant go back to what I need.
Mani Dinesh wrote:
Can somebody help me install IOS 6.1.3 back to my iPhone 4.
Downgrading is not supported by Apple.
Mani Dinesh wrote:
...every app gives a break for 4-5 seconds to open up. ...
See this discussion...
https://discussions.apple.com/message/23731048#23731048 -
I have an external hard drive from my time capsule that stopped working on me. I am attempting to access the data with a hard drive reader on my MAC. I am able to see the drive in disk utility and under system info USB. But I am unable to access the data and it does not show on the desktop when connected.
Ok if disk utility was able to verify the drive I doubt there is any problem.. are you trying to open a TM backup??
You need to mount the sparsebundle then check the actual info inside the bundle.
Don't use disk warrior.. if the disk has verified then unless you deliberately deleted files there is nothing that is going to do.
Pondini has a lot of stuff about getting access to the sparsebundle.
http://pondini.org/TM/17.html
But if you have copied info to the TC that is now gone.. and the disk is ok.. I am not sure.. the TC will not have deleted the files itself. -
I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log
Maybe you might find some info to the right>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
-
I just got a new ipod 5 and when I plugged in the charging cord that came with it, it says it is not supported, and may not charge. It worked the first few times, but now it won't charge at all.
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store. The cable as well as the iPod, is covered by the warranty.
Apple Retail Store - Genius Bar -
I''m using a Kodak M532 camera with a 2 gigabyte SD card. I recently took 30 photos, all of which are visible on the camera's screen. When I attempted to import them the last 15 were said to be in an unreadable format (no. 1117 on). I deleted some 200 photos from the card, but photos that I then took, though also visible on the camera's screen, were also said to be in an unreadable format. Is there a fix?
There is an ongoing issue with Kodak cameras and 10.6. Workaround: Reformat the card with the camera and use a USB Card Reader.
Regards
TD -
i have an iphone 3gs, i bought it with the carrier Orange in Mauritius and i would like to know if it is possible to unlock the iphone so that i can use another carrier. thanks
Only the carrier can authorise unlocking. You need to contact them.
Maybe you are looking for
-
How I 'fixed' my iTunes 5.0 download...
I too got some errors whilst installing iTunes 5.0. Windows gave me an error during the download. Well, needless to say, iTunes didn't work anymore. Whenever I tried to uninstall iTunes, the uninstaller wouldn't work completely (again, an error). The
-
RUN Time error while use filter table in query generator
Hai.. I have 2 Functions under "Scalar valued functions" in SQL Server,i try to call this functions in Query generator its working fine,result also display correctly, but i click filter table system showing Error Message " Run Time Er
-
Refreshing data in an IFRAME with new value
Hi all, I have a jsp which has 2 forms 'frame_form' and 'main_form'. The 'frame_form' has a dropdown which contains list of cheque types (with the current cheque type selected) while 'main_form' contains an IFRAME whose src is a jsp to whom i passed
-
Same select max is very slow in one program but fast in another
Hi, I have a report that becomes very slow these few months. I used SQL trace for the report and found out its these codes that slow down the report: SELECT MAX( mkpf~budat ) FROM mkpf INNER JOIN mseg ON mseg~mbln
-
Photoshop keeps crashing when saving
This is the event log for the crash. It crashes randomly and the user is working with small files and maybe a maximum of 10 layers if that. The issue usually comes up when trying to save a file.