My iphone 5 is making me complete the whole activation process over again whenever I turn it off and sometimes when I turn the screen off. Also my icloud will not connect. Help!
Basically yesterday my iphone started requiring me to go through the activation process (connecting to wifi, logging in to itunes,etc.) I have tried r
I have tried restarting it but each time it requires me to log in again.
Similar Messages
-
my phone has been changed under warranty by the apple store in germany.
ı need a change document to register the phone in my country again.
ımeı numbers of old and new must be in the document.you can send an mail in pdf format
as soon as possible please.
your's respectfully.
new phone serial no:DQ******TC0
old phone serial no:DN*******T9Y
Product:
iPhone 4S
Serial Number:
DN*******T9Y
Service Requested:
December 3, 2012
Status:
Repair Complete
<Edited by Host>No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
But you can find the IMEI numbers yourself. Read the ENTIRE article:
http://support.apple.com/kb/HT4061 -
My iphone 4s will not update to ios 7. I'm trying to update this through my imac because the iphone will also not connect to my home wifi. I've tried several different things but nothing is working. I deleted enough pics and apps so there is enough storage. When i plug it in, it starts to bring all my photos to the imac. I cancel this because i don't want it. It then says extracting software, backing up iphone, then i get the error message. Do I need the iphone 5?
I just tried again, no code comes up on the imac. Just says cannot back up this device with my "initials" because of an error. It's weird because my iphone has been connected to othert wifi sources in the past. I've looked through these forums and have tried multiple things like resetting the phone, resetting network, shutting off modem and router, nothing works. I have an apple airport extreme router too. Any suggestions are greatly appreciated.
-
I just want to make my header taller so I can see the whole image in the persona I downloaded from firefox personas.
They should be nearly identical - Internet recovery has a few less features and takes far longer to start up. I think you only get Internet recovery on certain macs and even then only if the recovery partition isn't working. Once in recovery mode you should be able to repair the hard drive and permissions using disk utility.
Once you have repaired the disk you should be able to choose an install OS X option where it downloads a fresh copy space permitting and it tries to keep files in place.
I think N during startup gets you network boot and D on gets you the hardware test. Shift during startup should try to safe boot if there is some sort of conflict keeping it from starting normally. -
iphone stuck on recovery mode,,, cannot restore due to error 21. tried all ways to solve the error, but no use... plz help
Hi D’pak,
Thanks for using the Apple Support Communities. I understand that you are receiving error 21 when attempting to restore your device in recovery mode. The following resource provides troubleshooting information for this error message:
Get help with iOS update and restore errors - Apple Support
http://support.apple.com/en-us/TS3694#hardware
Check for hardware issues
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
- Matt M. -
HT201412 My Iphone 4 keeps randomly turning off, and sometimes it wont turn back on....
twice now it has stayed off for and hour, even with me trying to restart it or turn it back on it still wont. what do it do?
Thanks for the input! i also found out that once i was able to turn it on and plug it in to my computer i decided to restore it and see if that maybe would work and so far so good, plus i now have all my album artwork back on my iphone which had vanished when i updated to the IOS 6 and never came back.
-
My macbook pro suddenly turn off and now when I turn it on the display doesn't work but it is on!
Hello everyone,
My macbook pro 15" suddenly turned off. Now i tried several time to switch it on and seems it is working but the display doesn't function or there are many wired pictures coming up sometimes.
can anyone please help me with this issue?
ThanksWelcome to the Apple Support Communities
Your Mac can't find any bootable partition.
1. Insert the Mac OS X DVD that came with the Mac and press C key while your Mac is starting.
2. Select Utilities > Disk Utility, choose Macintosh HD in the sidebar and repair the disk. If it doesn't work, take the Mac to an Apple Store.
Also, open > Startup Disk, select Macintosh HD and restart. Maybe your Mac has forgotten the startup partition -
Does anyone know what is going on?
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
i cannot connect it to my itunes and the ipod says disabled but itunes says i need to type in the pascode but i cant do anything on the ipod
Try this program to get the iPod in recovery mode.
RecBoot: Easy Way to Put iPhone into Recovery Mode | Jaxov -
Itunes on my computer won't open!!! I double click on it and there is no response . Help!
Try taking it to the nearest Apple Store. They should have computers there that they can use to get your iPhone out of recovery mode. Make an appointment first.
-
The screen on my iPad 2 goes white when I turn it on and black when I turn it off.
I've tried pressing the power button to reset it but nothing shows up.
The screen occasionally goes white as if I received a notification supposedly on my lock screen. Of course, it's just white this time.
I've also tried plugging it in but nothing works either. So I don't think it's a power problem.
I tried to plug it into the computer and bring up iTunes and checked to see it wasn't a storage problem either.
I can't back anything up since there isn't one on my computer and I don't have enough space on my hard drive to back it up.
I've had this iPad for around three years though and it's still in good shape.To reset your iPad you have to push the Home and ON/OFF buttons at the same time.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.
Try that. -
Sometimes when I click the icon, it won't start and other times it will.
I click the icon in the bottom left (once) but Mozilla never comes up. I right click and select open on the icon in the left of the desktop, but Mozilla doesn't open. I go to "programs" [on windows 7], select Mozilla, but it doesn't open.
This doesn't happen all the time. Often if I have the problem, it loads fine if I restarts. Sometimes restart results in "a start over" where there is just the basic Mozilla with no past bookmarks, so I have to go to restore system on Windows 7 and it works fine after I restore 1-3 times, then we start all over again.Hopefully this support article is what you need:
https://support.mozilla.com/en-US/kb/Firefox+will+not+start
In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem does not disappear when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone. -
My airport extreme will not connect to the Internet
My airport extreme will not connect to my toshiba router. I connected it to my office internet this morning but when I hooked it up at home it simply will not connect. I have tried resetting all the settings and have had no luck. It did work once upon a time. I currently have my airport express hooked up so I know there is connectivity.
I could never figure it out after trying everything I could and going to the genius bar I ended up just purchasing another extreme. The really funny thing is that I can set up a network between the two and it works fine. I am using it at work now with out any problems so I guess there is really no loss :-?
-
My iPhone 5 keeps freezing when I connect to wifi, not just freeze the wifi, but freezes the whole phone and have to hold home and lock button. Locks up completely and instantly when I turn on wifi and connect. Solutions?
1. If you are really on iOS 7.1, you may wish to try upgrading to 8.1.2 which is the latest (basing this on your signature).
2. If updating the phone doesn't help, is this only when you connect to a specific wifi network? Or all wifi networks (including public with no password)? If it is ALL wifi networks, you may have a hardware problem. Genius bar would be the next step.
Make a Genius Bar Reservation (or cancel an existing reservation)
http://www.apple.com/retail/geniusbar/
Sign in using your Apple ID -
is there any way to restore factory settings on an Iphone 5s that will not connect to Itunes because the phone is locked with a pass code. Problem is that the screen is completely shattered.
If the screen is completely shattered why bother to try and restore the phone?
Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support
Maybe you are looking for
-
Pdf issue with internal links in Safari
Hello, I am creating a web site that has 80 or so pdf's available to download. They each contain a series of 20 or so speeches. To make navigation easier I have created a new page in Open Office that is an index to each pdf, with it's page number as
-
can you please help me to find What is worng with below query. it showing as null output which not true <?xdofx:if TOT_PROJ_COST=0 then 0 else (TOT_OTH_TAX_EXMPT/TOT_PROJ_COST) end if?> can i convert it to decode or correct the above statment.
-
Cannot compile db2 application [SOLVED]
OK ppl i really need your help. I'm trying to compile a db2 program. I have a sqc file. I have done: db2 prep 13.sqc bindfile db2 bind 13.bnd gcc -I$DB2DIR/include -I~/sqllib/include -c 13_01.c and then when i try to do: gcc -o program 13_01.o -Wl,-r
-
Hello, Our rcd table is getting bigger (21 M records) and querying from that table takes up a lot of time. What is the recommended way to keep the size of that table within control? We can always create a materialized view to get a subset of that tab
-
Hierarchy authorization based on 0CCA_O01
Hello experts, I have loaded single values & intervals for costcenters authorizations into 0CCA_O01. I have no heirarchy authorizations available. Now user still wants to select costcenters in query by hierarchy nodes, but he should only see nodes an