My iPhone 5 is not working, when I press doesn't work

Dear Sir/Madam,
My Iphone has stoped to work, it is off up to now. I have tried to fix or switch one but is still do not work and i don't know how to fix the problem. Please I need your help. Thanks
Benowartd A. Ungele

Hey bernssh,
Thanks for the question. I understand you are having issues with your primary handset microphone. If there was a potential hardware issue with the primary handset microphone, there is a good chance you would not experience the issue in Speakerphone, as this utilizes a separate microphone. To isolate the issue further, and ultimately determine if it is indeed hardware related, please see the following articles:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
iPhone: Sound muffled or low from the speaker or when speaking into the mic
http://support.apple.com/kb/TS1631
Thanks,
Matt M.

Similar Messages

  • My iphone 4 will not unlock when I press the home button, I have to alternate between the home and off button multiple times before my home scree will appear

    My iphone 4 will not unlock when I press the home button, I have to alternate between the home and off button multiple times before my home scree will appear....please help!!!???

    Do a reset
    Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

  • HT1430 MY IPHONE 4 WILL NOT RESTART WHEN I PRESS SLEEP/WAKE BUTTOM

    I press sleep - wake button and it will not start

    Then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. This should reboot the phone.

  • I just bought an iPhone 4s. Now the search iphone function is not working. When I swipe the screen to the left, the search box appears but when I type what I want to search for, there is no action. Please help.

    I just got an iphone 4s. Now the search iphone function is not working. When I swipe the start screen, the search box shows up. But when I type what I want to search, there is no action. Please help.

    Try this...
    You will Not Lose Any Data...
    Turn the Phone Off... ( if it isn’t already )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... (But can take Longer...)
    Release the Buttons...
    Turn the Phone On...

  • The ringer of my iphone 4s is not working but when itried to go in setting then sound and tried to change ringtone the ringer is working..pls help

    the ringer of my iphone 4s is not working but when itried to go in setting then sound and tried to change ringtone the ringer is working..pls help

    Check the mute switch along the side, near the external volume controls.

  • My iphone 3gs is not working properly, when switched on it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and more often than not just resets itself.

    My iPhone 3gs is not working properly and hasn't been since about September of last year. When switched on (Quite often it won't even turn on) it says 'Update Completed' as though it has just been updated. On the next screen it says to 'Connect to iTunes'. It doesn't, however, connect to iTunes and just resets itself over and over until power is gone. Occasionally after switching on and off a few times it functions normally for a few hours and some times even a couple of days but eventually always turns itself off and goes back to the 'Update Completed' screen. Does anyone know what might be causing this and/or a way of fixing it?

    Morning JordenR,
    Thanks for using Apple Support Communities.
    You can resolve many restore issues using the troubleshooting steps documented here.
    For more information on this, take a look at this article:
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/ts1275
    Best of luck,
    Mario

  • My speakers from my iPhone 4S is not working I'm clicking on the buttons on the side nd the volume is not even showing getting louder or lower but when I plug in my ear phones I can hear it juss happen out of no where what sould I do ?

    My speakers from my iPhone 4S is not working I'm clicking on the buttons on the side nd the volume is not even showing getting louder or lower but when I plug in my ear phones I can hear it juss happen out of no where what sould I do ?

    Your iPhone charging port may have a minor short, causing iPhone to falsely sense it is connected to a dock turning off its speaker. Clean iPhone charging port with a clean dry toothbrush.

  • When I was updating I Phone version 4  from iTunes. it got stuck in middle of updating, after uninstall the version 3 and new version 4 was not installed. Now iTunes is not detecting the iphone and my iphone is also not working n showing connection cable

    When i was updating i phone version 4 from Itunes. It got stuck in middle of updating, after uninstall the version3. But new version was not installed. Now itunes is not detecting the iphone and iphone is also not working and showing connection cable with itunes. Pls help..

    Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
    (Do not use your own Anti-virus to SCAN)
    Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
    http://www.malwarebytes.org/products/malwarebytes_free
    Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
    To start your computer in safe mode
    Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
    On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
    When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

  • Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?

    i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

    Charger60 wrote:
    i
    Touch ID in my iPhone six does not work when it's plugged  into the wall is anybody else having this problem?
    No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
    Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

  • IPhone 4S speaker not working when I push to turn up the volume doesn't show icon or any sound

    Some one please help my iPhone 4S speakers not working and when I try to turn up the volume it doesn't show the icon

    Try This...
    Close All Open Apps...  Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    Also...
    See Acoustic-speaker/microphone/receiver
    Here  >  http://support.apple.com/kb/TS2802

  • I m in from bangladesh 7days ago I bought an iphone 4 but not work with sim card. no service.

    7days ago I bought an iphone4 from my friend Mithu who come from Singapore.
    He told me he that after 7days he come dhaka and open my iphone by using sim. but 4days ago he died on road accident.
    He didn't give me any documents & I also knocking his family for that but said they didn't know about iphone. but i cut a sim & insert it in my iphone but showing no service, some time no sim.
    How can I work with my iphone,
    plz plz plz advise me. I hv not enough money to buy another one,
    Plz help me remembering steve jobs.
    Version------- 4.2.1(8C148).
    Carrier Lab 9.0
    Model MC603B.
    Serial---8602613MA4S

    The iPhone 4 may not work with a cut down SIM. Get a microSIM from your carrier when you set up service.

  • HT1689 my iphone 5s is not working shows that it needs to connect to itunes

    my iphone 5s is not working it shows that it needs to connect to itunes

    Hey Linard Michael,
    Thanks for the question. I understand you are experiencing error 4005 when attempting to restore your iPhone. The following resource provides a potential solution for this error:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, thentroubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    - Use another USB cable.
    - Plug your cable into a different USB port on your computer.
    - Try a different dock connector (or no dock).
    - Add (or remove) a USB hub between your device and computer.
    - Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Thanks,
    Matt M.

  • My ipod on my iphone 3gs is not working, what do i do?

    please help.. my ipod on my iphone 3gs is not working, what do i do?

    thank you for your answer. its just that when i press the music icon its just shows a blank white page=
    then close again. its like its crashing whenever i tried to open it. tried=
    to restart. it still did the same problem. i'm trying to restore it now. h=
    opefully it'll work. what else can i do if that doesn't work?

  • The ringer on my iphone 4S is not working.

    the ringer on my iphone 4S is not working. Phone not on silent mode, no red dot showing, tried turning on and off completely

    Sophiaand88 this seems to be a problem with an unknown solution and may be related to a recent update (?).  I began having the same problem about 10 days ago when I upgraded to 6.1.3 software.  Through research, I have learned that it is a relatively uncommon problem  and there are no sound solutions and apple has not addressed it in a favorable way.  Multlple suggestions out there including phone in the freezer, blow dryer to the wi-fi area. All sound crazy to me.  I have personal hotspot that at least helps me for now.  I will give apple a little time and hope a solution comes, but if not I will probably have to get a new phone.  P.S. no one I dealt with at my sprint store had ever heard of this.  P.s. I reset everything to no avail.  Good luck.

  • The greeting button on my iPhone 4S is not working it is there but i can't press it why is that?

    The greeting button on my iPhone 4S is not working it is there but it is grayed out I am trying to change my greeting from personal to the default one how to I fix this?

    I have a similar issue I could use help with.  I just upgraded to a iPhone 4S and received my new phone but there is no Greeting buttong at all.  When I go to the phone icon, then the voicemail icon the voicemail icon automatially dials an A.T.& T voicemail number  - there is no Greetings on the top lefthand corner.  My cousin has the same phone and she has Greetings typed at the top of her voicemail page and she can click on it and then there is a place to leave a voice mail message.  The upshot is, I have no outgoing message and  nothing for people to hear and no way for people to leave messages.  Any suggestions?

  • Air 2.7 and MacOs Lion: iPhone packager does not work

    hi. After upgrading from Snow Leopard to Lion the iPhone packager does not work. It throws an error concerning the Application Version Number. Is this a Know bug? Is there a work- around?  Thanks.  Michael.

    Yeah sorry, the start of my descriptor looks like this:
    <?xml version="1.0" encoding="utf-8" standalone="yes"?>
    <application xmlns="http://ns.adobe.com/air/application/2.7">
      <id></id>
      <versionNumber></versionNumber>
      <filename>d</filename>
      <description/>
      <name></name>
    When I go to compile the app the compiler inserts that line into my descriptor at the very bottom (just before the application tag closes). It's weird, I tried setting the <application xmlns="http://ns.adobe.com/air/application/2.7"> back to 2.6 and it works and seems to compile in 2.7 (as I noticed the timer bug).
    Anyway, I only tried 2.7 because I heard the GPU fullscreen bug had been fixed, but given that the timer issue still remains I'll go back to 2.6 for the time being.
    Thanks

Maybe you are looking for

  • SSO to Non-SAP using login-tickets

    Hi all, I'd like to set up an SSO connection to a non-SAP HTTP system by using the SSO web filter (iis_sso.dll) on IIS 5.0. I've created an iView (using the application integrator) with the URL template : http://<ip-address-host>:82/reqvars.asp?<Auth

  • Pass structure or array into a custom tag?

    Is it possible to pass a CF structure or array to a custom tag (C++/MFC) as an argument? Is it possible to create a CF array or structure *from* a custom tag?

  • Array of objets

    I have two dimentional array of objects someobject[][] d = new someobject[3][3] when I try to access a mutator method in the particular object I get the NullPointerException d[0][0].setmethod(somearraylist) inside the object there is an ArrayList of

  • After install o my Windows7 PC, it starts but never displays. The process is shown in processes, but it never displays.

    OK, I installed Firefox 4.0.1 on my PC with Windows 7 64-bit. After installation, the browser came up ormally at the end of start up. After that, when i start FireFox, the Cursor gets the hour-glass for about 15 seconds and then stops. But, the brows

  • Command L does not open library

    Just bought Classroom in a book for CS4 flash. The command + L does not open the library. Is the is an indication of a poorly written book (I heard some bad things about CIB Flash CS3. Hope this one is better. I can open the library by going to Windo