My iphone 5 jack plug has become loose (headphone plug falls out)
My iphone 5 jack plug has become loose (headphone plug falls out)
I wanted to know if apple repaired this, if so how much would it cost?! many thanks.
Hi there Kingofmelts,
Welcome to Apple Support Communities.
It sounds like your iPhone is displaying the Connect to iTunes screen. Take a look at the article linked below, which provides more information about the issue, and will walk you through the process of restoring the iPhone from recovery mode.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Take care,
-Jason
Similar Messages
-
Hello, I have an otter box for my iPhone 4s and recently the rubber schell has become loose and a little flappy. A lot of my friends have told me that the otter box breaks the lock button on the iPhone and sure enough it has happened to me. It's as if the lock button is frozen in place and won't click down. Can I return this phone for a new one? my biggest fear is that I'll have to go a couple of weeks with out a phone while I wait for my new one.. And with regards to otter boxes, should I stay away from them to prevent future issues like this from happening again?
Thank you for your help!"Can I return this phone for a new one? "
Do you mean "can I get a new iPhone for free?" Nope.
Do you mean "since Applecare does not cover accidental damage, can I get a replacment iPhone, for around $250?" Yes. -
My screen on my mac has become loose and goes all glitchy with vertical lines
My screen on my mac has become loose and goes all glitchy with the whole screen covered in vertical lines, it also has a lump at the base of the screen when it closes but that can be pushed down, All can be fixed by placing the screen carefully but it is increasingly difficult - HELP
Bring it into an Apple store genius bar for a free evaluation. If your MBP is not under warranty, you will br told what the costs are which you can accept or decline. Look at iFixit.com or Powerbookmedic.com for do it yourself options.
Ciao. -
if my iphone 3g screen has smashed and my phone is out of warranty. will apple be able to replace the phone for me or repair the screen?
i heard apple can upgrade my phone if a pay a specific amount? is this correct?
also if my phone is out of warranty how much would it cost for it to be replaced?Apple does not repair smashed phones. It will replace the phone with another iPhone 3G as an out of warranty exchange for 199.00 USD.
You should check with your carrier to see if you are eligible for a subsidized iPhone 4. It may cost you the same as the out of warranty replacement for a phone almost 3 generations old. -
somehow an additonal icloud account has been set up on my iphone the problem is it ahs become the adminatrative account so i cant just delaet it how do i change the main account?
Are you confirming your POP account is selected as the sending email account before the message is sent?
And regardless if the email is a new email or is replying to or forwarding an email received by the POP account and cofirming the POP acconut is selected as the sending email account, the message is sent by the Gmail account?
All message sent by the POP account are sent by the Gmail account?
If so, delete the Gmail account from your iPad and test if a message sent with your POP account which will be the only email account available with the iPad's Mail app is recieved from your POP account/address.
If not, something else is wrong or on play that has nothing to do with the iPad. -
i can't get any sound to work on my iphone 4s unless the headphones are plugged up
http://support.apple.com/kb/TS2802
-
HP G6 Laptop Power Ribbon Cable has become loose!!
So I noticed a overheating problem with my laptop and followed one of the many videos on youtube on deciding to clean the fan. Once I finished, i put everything back together but noticed the electronic part attached to the purple "Power button" ribbon cable is coming off the motherboard, it's not sticking on it. I kept trying to force it on, but it would always come off. Now when I try to turn the computer on (with the top of the laptop still widely open), I try to put force on the motherboard end of the ribbon cable and I occasionally get some light coming from the laptop power area, but it quickly goes away. And no this is not a battery/power adapter issue because the lights telling me "battery is charging" come on when I plug in the adapter, I don't know how to fix this power cable and it's end part, any help would be much appreciated. Btw my laptop is this model: Hp G6
Hi,
Must be something is not quite right. I used 300W 12V-240V converter to charge my Dell XPS M1730 (with 230W power brick) w/o any problem. To test the PSU: does it run OK on main ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Iphone 6 64 g charging port all cables fall out of it .
I have had my iPhone 6 for 3 weeks now .. Every time I charge it , if I move the phone , it disconnect from charging and cord slips out of the port so easily. . Seems as though the port is defective due to not holding the lighting cable in . I have used 3 different cords so I know it's not the cord .. Is anyone else having this problem. I have apple care but if there is a simple fix i prefer to do it instead of having to go to apple. PLEASE HELP ????
This is a simple common fix/problem
dust/lint gets in charging port!
apple cleaned out ! Just like new again
cord is locked in -
Loose headphone socket on iPhone 3GS
I have had my iPhone 3GS for 24 months now and the headphone socket has become loose from wear, meaning that the headphones when in the socket are sometimes undetected and music is played out loud through the speakers. This can become quite embaressing on the underground!
Is there any way of fixing is?
And is this a problem which many people have had that the new iPhone 4S has decided to overcome?
Kind regards,
Sharley530If you don't want your iPhone exchanged again, then you have to live with it. You might as well open the iPhone yourself in that case since you won't be interested in an exchange under warranty - unless a far worse problem develops.
Per the writen warranty, an exchange under warranty will be a new or refurbished iPhone with no way to tell the difference. A refurbished iPhone is probably more closely inspected and tested than new iPhones when manufactured.
An exchange under warranty is provided in a white box regardless if the exchange is new or refurbished. It is called a service unit. Apple does not take an iPhone that was exchanged and just stick it in a white box. An iPhone returned for exchange is refurbished. -
Part of screen has become unresponsive
Suddenly part of my Iphone 4 screen has become unresponsive. In vertical screen mode, it's the bottom R.hand corner and selected other spots near the bottom of the screen, e.g. the back button, z,c,and m keys. It seems to be the same area of the screen when turned into horizontal mode, so that there it's e.g. the send button in mail. In the phone, pressing the back symbol brings up the # sign, just above it - so if I make a mistake hitting the phone keys, I can't undo it without powering down then re-powering up.
There are no scratches on the glass, and I have tried re-setting the phone. I have the latest Itunes and ios. Any ideas?
Thanks,
RichardHere are some ideas: iPhone and iPod Touch: Troubleshooting touchscreen response: http://support.apple.com/kb/TS1827
-
What do I do when my Nokia n96 slide becomes loose...
I've only had this phone for about 2 weeks, and I've realised that the slide of my nokia n96 has become loose, I know it's something that has happened to most n95, but the n96 is obviously new. How do I fix it? It's under warranty, can I get it fixed free? It's annoying to hear the vibration and the creeks of it!
It depends on how loose it is. Most slider phones loosen up the more you use them.
All you can do is take it to a nokia care point and ask their opinion about it. They may say it's perfectly normal or they may be able to tighten it up under warranty.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair. -
My Headphone jack in my iphone has a peice of headphone plug stuck inside so it constantly thinks theres headphones plugged in and i cant get it out!! what do i do?!?!!? please help!
Make an appointment at the genius bar. They may be able to help you.
-
When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I talk by phone headset
Hi! I have the same problem when I use my headphones .
iPhone 4s England, iOS 6.1.2 -
How to get the Bang & Olufsen A8 Headphones plug to fit the iPhone jack
Ok, this is for those who have the B&O A8 headphones and who want to be able to use them with the iPhone without having to use some kind of adapter. This might work for other headphones as well but follow the following advice AT YOUR OWN RISK!!
Also, the A8 headphones are EXPENSIVE so do this AT YOUR OWN RISK! All I know is after I've done this I'm VERY HAPPY.
To make the plug fit you have to first understand how the plug is constructed. The plug is made of three parts, the central metal shaft, the plastic sleeve surrounding the metal shaft, and the rubber grip covering the plastic sleeve. If you look at the plug under a magnifying glass concentrating on the base of the shaft, you can clearly see the two layers surrounding the shaft, the inner layer is the plastic sleeve and the outer layer is the rubber grip.
Now to make the plug fit, you need to CUT THE RUBBER grip just far enough back so that only the plastic inner sleeve goes into the headphone jack recess. One way to do it is to wrap a piece of narrow masking tape around the rubber grip about 1/8" back from the leading edge - this serves to guide your cutting blade. After that you either do what I did, use a dremel tool to thin down the jacket and then use an x-acto knife to cut around the sleeve using the masking tape as guide, or just cut around the grip right away and take your time.
When you cut the grip, do so carefully so you stop at the plastic sleeve. The x-acto knife isn't really sharp enough that you can cut through the plastic that easily. But remember you need the plastic sleeve intact to stop the plug from going into the jack too deep.
Anyway, once the rubber grip is cut back, the plug fits perfectly and it actually doesn't look bad at all!!Better yet, DONT CUT THE RUBBER GRIP. Mine just moved back with a little slow effort, it slides back over the cord. I am very careful when I remove it from the iPhone not to let it get too far up and it hangs on to the shaft. When it is removed from the iPhone the grip just slides back down if I want it back to how it was.
Maybe I was just lucky that it wasn't glued on or something. I just didn't want to mess with my warranty in case I ever need it. Gotta love that $65 dollar replacement program. Sometimes you really do get what you pay for. -
My iphone thinks it has headphone plugged in when they are not
My iphone thinks it has headphone plugged in when they are not. What to do?
https://discussions.apple.com/thread/1343532?start=0&tstart=0
i'ts a known hardware issue
Maybe you are looking for
-
Are there any issues with starting a task sequence one day and finishing it up days later?
Hello, We have a few techs who, for whatever reason, will sometimes start a deployment task sequence (from boot media, USB) and then finish the task sequence the next day or days later. For example, I had a recent one where the smsts log file had a
-
How do I fix jagged fonts in Preview?
Something happened and now all the pdf-documents I open in Preview have really jagged fonts and terrible quality. I'm using OS X 10.6.8. This might have happened when I last updated the software, but I don't remember exactly. How do I fix this?
-
Import Tag library problem in JDeveloper 10.1.3.3.0
I want to have an FCKEditor on a JHeadstart generated page, so I downloaded the FCKFaces jar with the tag library in it. When I try to add the FCKFaces tag library to my project, doing just that and not modifying any code, when I run my application a
-
Conversion of value 'blank' to # (Not assigned)
Hi, We have extended the DataSource 0CA_TS_IS_1 with the field ZZAWART att/abs type. The component type is AWART and domain is AWART. This domain has no Conversion routine. We have created a filter on this field in the dtp from one DSO to another DS
-
I have photoshop lightroom 5, however, i have a mac air, and cannot use the cd to download it. Where can I find a link to the right download, as i think it is different then the creative suite version. Thanks!