My iphone 5 power button doesn't always work.  I have heard this is an issue and Apple will replace it if under warranty, but I have a broken screen.  Will they still replace it?

My iphone 5 power button doesn't always work.  I have heard this is an issue and Apple will replace it if under warranty, but I have a broken screen.  Will they still replace it?

It is unlikely but you can atleast try they might set it up for free but expect an email about paying 269 for physical damage

Similar Messages

  • My iPhone 4 home button doesn't always work. sometimes its just not responsive. other times, it works great. what's the problem, and how do I get it fixed? my iphone  is 2 days old

    my iPhone 4 home button doesn't always work. sometimes its just not responsive. other times, it works great. what's the problem, and how do I get it fixed? my iphone is 2 days old

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    -Griff W.

  • IPhone 3GS Sleep/wake button doesn't always work

    Recently i upgraded my iphone 3gs to iOS 5.0.1,
    Since then, my sleep/wake button doesn't always work.
    It's pretty annoying, and i hope there is a solution to this issue.
    Thanks in advance.

    One possibility is that your phone is more occupied with "managing" iOS 5.0.1 since it has more features etc. This could especially be the case if you are using a lot of apps.
    Another option is that the button is simply worn out... I used to have that issue with the home button of my old iphone 3g. However, if the problem started occuring right after you upgraded your iOS, it probably is a software issue...

  • I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????

    I have bought a IPhone 4 from Malaysia, my home button is not working. I want to replace the phone under warranty but all service centres mention that its country specific and I need to get it replaced only at malaysia. Can anyone guide me what to do????

    The iPhone warranty is not international and as you purchased in
    Malaysia the warranty is only valid in Malaysia
    You could try taking to an iPhone Authorised service provider
    in India but there have been many similar posts to yours
    and I am not aware  of them assisting  with an iPhone from
    outside India

  • IPhone 4 home button doesn't always work

    Not sure where the problem lies here, with hardware or software. The home button appears to be working inconsistently. Sometimes a normal press pulls up the home screen. Sometimes, I have to really press it hard, or several times. Double click and home screen routinely don't work reliably. Is this a software issue or hardware. If so, is it repairable or covered under warranty?

    It's a hardware problem, if it's under warranty, take it to an Apple Store and they will replace it for free. If is not under warranty, they will charge you the cost to repair

  • My phone keeps freezing and the home button doesn't always work

    My phone keeps freezing and the button on the front of phone doesn't always work when typing my phone goes slow

    Try this... You will Not Lose Any Data...
    Close All Open Apps...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    http://support.apple.com/kb/ht1430

  • Iphone power button doesn't work and LED is on

    Have a black 64gb iphone 4s, (ios 6.1.3), no case - for about 1yr4mo.  last week i fell asleep on the phone and when i woke up, the power button wasn't working.  I left the phone plugged in for the rest of the night, and when i got up it was working again.  Last night I once again fell asleep on my iphone, and woke up to find both the power button not working AND the LED light is stuck on... its kind of like at maybe 5% brightness.  I put the phone in a bag of rice for the rest of the night, but this morning now, the light is still on and LED still on.  Phone never officially got wet, but I suspect there was enough moisture to potentially cause problems.
    phone is out of warranty and i'm trying to figure out how long i wait until i start poking around at it to see if i can do anything with it...
    anyone have any ideas?

    Hi, bruno7.
    1. Have you tried "Mac OS: Apple Pro Keyboard Shortcuts for Shut Down and Restart"?
    2. What changes did you make to your Mac before this problem arose?
    3. Are you using FruitMenu? If so, check for updates, disable it, or uninstall it.
    4. After you next shut down, run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
    5. An errant Startup or Login Item maybe the cause. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
    6. If none of the above, when you attempt to select Shut Down or Restart from the Apple menu and nothing happens, immediately check the ends of these Console logs for clues.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Sleep button doesn't always work

    I have the iPod touch 4th generation. The past few days the sleep button hasn't been working properly. It seems to pick and choose when it works. When it doesn't work, I have to wait a minute for the iPod to put itself to sleep.
    Is there anything I can do to fix this, or is it a case of it being faulty and having to send it back and have it replaced?
    Thanks

    Try the basic troubleshooting steps. If it still does it, contact Apple and get the switch replaced.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • Iphone 5 will not turn off + lock button doesn't always work

    Has anyone seen this problem my iPhone 5 will not always lock or be able to turn off .
    It eventually turns off then after reboot works fine for a while then starts to play up again

    Have you tried resetting the iPhone?
    To do that - Press and hold the Home button and the Wake / Sleep button at the same time. Keep them both pressed until the Apple logo appears on the screen, it can take over 10 seconds for this to happen.
    If that does not work then try restoring the software in the iPhone in iTunes.
    If that does not work then take the iPhone to Apple as it may have a hardware fault.

  • Safari back button doesn't always work

    The back button on the Safari 3 beta doesn't seem to work on all websites. Does anyone have an explanation or fix for this?

    I found the fix. Disabling the MacAfee Site Advisor plug-in fixed it.

  • Having problems connecting iPhone 5 with our company's Exchange 2003. Is this a known issue and is there a fix?

    I'm not the only one in our company experiencing this, so far i haven't heard of anyone with an iPhone 5 who is able to connect. I'm wondering if people in other companies that have Exchange 2003 also have the same issue or is this isolated to ours.
    The errors i get are not being able to verify: "Unable to verify account information." This used to happen before but when i chose to save settings, it would usually work after a while. But this time, with the iPhone 5, i kept getting "Cannot Get Mail" "The connection to the server failed".
    I did this with a restore from back up, and a wiped phone, same results. My colleague with a fresh out of the box phone with no previous IOS backups, also has the same errors.
    So, anyone else still using Exchange 2003 and experiencing the issues?

    Hi Guys,
    I got exchange mail working. It seems issue is around "Push". I enabled "push", account verified & all worked well. After that I disabled push (I do not want it & to save mobile data use).
    By googling, I found many have got it up & apple may fix it in it next iOS udpate.
    Regards,
    Mathew

  • Bottom button is not always working.

    My Iphone bottom button does not always work.  Is there a way to fix that.

    You mean your home button?
    If it intermittently works, then you either have to get it cleaned out or fixed. Back up your iPhone and take it into an Apple Store.

  • IPhone 5 power button doesn't work

    My power button doesn't work and I still have the warranty and I wanted to know that if apple replaces my iPhone will I have to renew my contract with Verizon

    Replacing the phone in no way affects your Verizon contract.

  • My iPhone 5 is disabled and the power button doesn't work. How would I fix it?

    My iPhone 5 is disabled and the power button doesn't work. How would I fix it? Please Help

    wait it for your iPhone to die then before it turns it plug it into iTunes while holding the home button and it will force it into recovery mode.
    will be hard to get the timing right cause u will need to wait for the battery to die and charge up again. Other then that just take it to apple and have them replace the device for a fee.

  • Hi! I bought my iPhone from USA and the power button doesn't work. I have warranty. I will come to UK soon. I wanna learn; can i benefit my warranty in UK?

    Hi! I bought my iPhone from USA and the power button doesn't work. I have warranty. I will come to UK soon. I wanna learn; can i benefit my warranty in UK?

    The warranty is not and has never been International.  Warranty and support are only valid in the country of origin.  The only exception is for devices sold in the EU where the EU is treated as one country for warranty and support purposes.

Maybe you are looking for

  • Project builder authorization

    Hi all, is there any way to restrict user from displaying and maintaining all projects exsisting in other way : to give him limited authorization to maintain certain projects only and not to be able to maintain the other projects through the Project

  • Timezone offset for dst in LabVIEW 8.5

    I think there is a "bug" in LabVIEW 8.5.1 and probably 8.5 too. I used to have an application that was transmitting timestamp data between computers in some sort of HTTP protocol. The server application has been build in LabVIEW 7.1 and remains in th

  • Error when I try to update the version XI Pro

    I install and have no problems but when I try to update the version I get this.

  • Turkish Character Insertion Problem

    Hi, I am loading data from an Excel sheet and it contains Turkish characters. Database character set is TR8MSWIN1254 and i im inserting VARCHAR2 column. All characeters are loaded successfully except these three " Ğ ", " Ş " and " İ ". Can any one he

  • AutomationException: Class not registered

    CoreAPI is defined in "My Computer\HKEY_CLASSES_ROOT" "My Computer\HKEY_CLASSES_ROOT\CLSID" also has a valid value. Any ideas why the following exception is raised? Thanks AutomationException: 0x80040154 - Class not registered at com.bea.jcom.bm.b(bm