My iphone 5 require activation and i have connected with wifi but it is unable to activate
my iphone 5 require activation and i have connected with wifi but it is unable to activate
It needs a SIM card installed.
Similar Messages
-
I have an iPhone 4 and am in Nepal. My phone was previously able to connect to wifi, but now is unable. I have an iPad and that is able to connect just fine. This problem is with every wifi hotspot I have tried so it is the phone not the modem.
Try Settings > General > Reset > Reset Network Settings.
-
i have been using a jailbreak iphone 3gs. recently i have officially unlocked. i have updated the os. but i am unable to activate my phone. it says no sim card installed. cud u help?
Jailbroken phones can not be discussed here.
It's highly likely that it is now bricked. The jailbreak most likely did permanent damage. There are lots of reports of previously jailbroken/hacked phones that become unusable when attempting to apply a legitimate unlock. -
I have iPhone 4 with updated latest iOS And i am using FIND IPHONE application. But everytime when ever i login in it and serch for the device its shows the device but never give me the location"NO LOCATION AVAILABLE".It is already connected with WIFI and i tried all the stuffs that has been written in the manual. Plese give me the Proper suggetion about this issue..!!
If your router is not identified in a national database (don't recall who maintains it or where it is) then there is no location associated with it. Hence your device cannot be located. I suggest you try your test at some public wifi spot, like a bookstore or coffee shop. These places usually have a location associated with their wifi router.
-
ipad is disabled and i had connect to itunes. but when i connected to my computer, its not sinc automatically , still ask me to enter the pascode first. so how can i restore my ipad ? seems my laptop didnt know or never get sinc with my ipad.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Connected with wifi but unable to browse internet on my iphone 4
my iphone 4 is connected with wifi anf it shows proper connectivity but i am unable to browse internet on my device ,i have tried many things suggested by apple support forum and nothing has worked for me so for. i have reset settings for network many times. also this wifi is working fine on my mac and other IOS devices.
I would verify each smtp setting in the settings email account with the settings
provides by the email provider to verify that those still matched -
When I first unlock my iPhone, it says I have connection to internet. But when I do something that requires internet, it either does not load, or it gives me a connection error message. I just got this phone yesterday from my mom and she barley used it. I have tried factory resetting it but it wont let me.
Hi Bdegroot8,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like the iPhone is having trouble with Wi-Fi. It looks like you have already done some troubleshooting. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support
iOS and OS X: Recommended settings for Wi-Fi routers and access points - Apple Support
If the iPhone is not able to be restored, follow this article.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Cheers,
Mario -
my iphone is disabled. it prompted me to connect to itunes but when i connected to itunes... it will just say cant detect iphone because it needs to unlocked. how can i unlocked if theres no way to unlock it? pls advise. ty!
Hey aldrichangel!
Here is an article that has a few suggestions for you that will help you unlock your phone:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
When I try to backup to. Loud from iPhone it will not work. iPad worked fine. I says leave locked, plugged in and connected to wifi. Unable to back up this time. Or failed to complete. I have followed instructions. I have even taken lge amounts required to be stored off list to see if a smaller amou t would work but it hasn't made a difference. What am I doing wrong. iPad was easy.
I have the same problem and can't seem to find a solution anywhere in the support forums or online.
Last backup says, "Never" but 7gig of my 15g of storage is used up. Every time I try to manually start backup to iCloud, the progress bar never moves and I only get "estimating time remaining."
The phone appears to not be backing up automatically at all when my phone is plugged in, locked and on my wifi network.
Apple appears to be unaware or unconcerned with this problem. I'm concerned though. It looks like I'll have to drive an hour to a store to get any help with this problem. Is it seriously cheaper to have a live body in a store used up rather than online interactive support?
Any help with this backup problem would be appreciated. -
My iPhone 4S shows that I am connected to wifi, but still shows 4G and not the bars for wifi.
I have been using my iPhone 4S for one year and has been working perfectly fine until now. I connect it to wifi and it shows the blue check, showing I am supposed to be connected, but at the top, where the 4G network shows, it stays at 4G and does not show the bars for the wifi. It only connects to the one home network I have. When I am connected to the home wifi, it kicks me off the wifi everytime I put my phone on standby--> lock it after I am done using it. It also kicks me off my home wifi occasionally, when I am in the middle of using it, and have to recconect it. If I go to a store, for example, JcPenny, I try to connect it to the wifi there and it shows the blue check, and like I said, the 4G network does not change to the wifi bars. Please try to help me!
You are detecting the wifi, but not connected to it.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
hi, i have a problems. my iphone is being disable after my daughter play with it and been entering all the wrong code. so my iphone is now disable and it say connect to itunes. i already plug my iphone to my computer, how ever my computer could not detact my devic. and because of that i cant connect it to my itunes. how do i deal with this problems?
iOS: Device not recognized in iTunes for Windows
-
I currently upgraded my phone and am trying to take the pictures off of my old iPhone 4 to my new iPhone 5. I was told that once they disconnect my iPhone 4 that I will basically be able to use it as if it were an iPod... Normally that would be fine because I could connect through iCloud but for some reason I am unable to connect. It is telling me that it is unable to connect to the Internet. All I want to do is transfer my pictures from my old phone to my new phone.
Welcome to the Apple Community.
You can always transfer the photos via your computer using a cable. -
Hey my problem is that my ipod was connected with the internet and from alone it ends.
Now I try to get in the internet again, but it doesen't work.
Plaese could you help me?
Thankssimple all you have to do if your using your imessage throw WIFI (internet) just go to Settings > wifi > then next of the (NAME) of your wifi there is small blue arrow click on it and then new page will come up click on the DNS server there will be number remove it delete it and type this number 8.8.8.8
i had same problem and i just serach and it worked for me and i hop the same to you.
^_^ -
I Need your help ,pls. I can't use my iPhone . It can't on and off , no display anymore.
Hello Apple_Addict22,
Thank you for your question. iOS 7 requires iTunes 11.1. First, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/ht5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M. -
please help me I am on a deadline this morning and need to be on my way out of town by 10 this am and cannot leave without this phone working
Try resetting it: hold the on/off and home buttons 10-20 seconds until you see the Apple logo, ignoring the off slider that appears first, release and wait for it to restart. If that doesn't work, you'll probably have to put it in recovery mode and restore it from your most recent backup as described here: http://support.apple.com/kb/HT1808.
Maybe you are looking for
-
Custom search help in WD for ABAP
Hi I have a Text field which does not have any input help. Now I have a custom Search help object in my R/3 store. How do i use this search help object for displaying the values for this Text field. I believe there is some standard method available
-
Cisco Systems vs "CSIRO" 802.11a and 802.11g infringed upon the '069 patent
Hi, any news about Cisco Systems and the "CSIRO" 802.11a and 802.11g infringed upon the '069 patent ? http://www.buffalotech.com/products/wireless/ Dear Customer As you may be aware, Commonwealth Scientific and Industrial Research Organisation ("CSIR
-
Providing security to the PDF file using apache FOP in java
I am working on PDF file generation using Apache FOP, I have security concerns which are 1. PDF file will be placed in a folder after generation and that should not be copied to other locations. 2. PDF file should only have an option print nothing el
-
RFC Adapter for multiple clients
Hi All I have a situation where we have a Dev client (030) and a Test client (041) on our SAP Dev system. We are implementing an XI interface with a non-SAP system that also has a Dev and Test environment. Up to now the interface has only needed to
-
I just noticed using System Profiler that there are two versions of Front Row on my iMac. Version 1.0 is located in /Applications Version 2.1.6 is located in /System/Library/CoreServices/ Double-clicking either one brings up versions 2.1.6. Does all