My iphone 5 restarts after 30 mins of facetime audio. firmware 7.1.1

Lately i have been facing this issue of my iphone restarting when I am on facetime audio. It usually happens after 30 mins. What I have also noticed that it restarts more often when i am using headphones. Phone details - iphone 5, ios version 7.1.1, location India, carrier Airtel

Lately i have been facing this issue of my iphone restarting when I am on facetime audio. It usually happens after 30 mins. What I have also noticed that it restarts more often when i am using headphones. Phone details - iphone 5, ios version 7.1.1, location India, carrier Airtel

Similar Messages

  • China iphone ios7 does not have facetime audio feature

    I had buy iphone5 from chian, shanghai and i had update the latest IOS7 to my iphone5 and later i noticed that my iphone 5 does not have factime audio feature ,at first i thought my ios did not installed proplerly later i asked my 2 friends to check the same and surprice they tooooo didi not had the facetime audio feature

    Same thing here
    I also gave those chinese social networks on the settings panel and I can't get rid of them.

  • Can not unmute iPhone 6 after connection to car audio

    I have a strange issue with iPhone 6, IOS 8.02. After the phone is disconnected from car audio it goes into mute by itself and I can not unmute it. The silent switch has no affect. The volume up button will unmute the phone but only while I am holding the button. The instance I let the volume up button go, the phone mutes itself again. The only way to get out of this is to power down and back up again.
    Did anyone see anything like that and have any suggestions?
    Thanks in advance for your help

    Hi borisser,
    If you are having issues with unmuting your iPhone after having connected it to your car stereo, and have already tried restarting it with no resolution, I would suggest that you back up and restore the iPhone as a new device. See this article -
    iOS: How to back up your data and set up your device as a new device
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • Is anyone having issues with bluetooth on the iPhone 4s?  Mine will change audio souce by itself, sometimes  stick on speakerphone

    Audio source chanes on its own to speaker or iphone. This happens both in my car and my jawbone headset. Anyone else experiencing this?

    The problem is that you're using an uncertified lightning to 30-pin connector (the blue cable).  If you purchase the 30-pin to lightning cable (either online, at an Apple store or an authorized dealer) it should work fine.
    I have a 2011 Tuscon and tried the lightning to USB cable that came with the phone - no dice.  Talked to my local Hyundai dealer and they don't have an eta on the Hyundai lightning cables (I'm sure it's in the works).
    Lightning to 30-Pin Adapter (0.2M)
    Part Number: MD824ZM/A
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=48
    $29 in the US store, $45 in Canada (yes, even though our dollar has been par for years)

  • Phone constantly restart after update to 4.5 firmware

    I updated the firmware from 4.2 to 4.5 on my Blackberry 8800. After that, it constantly restart. If I press "back" key before "Loading programs" messages, sometimes work. But, few minutes later restart again.
    If I connect the phone with my PC, it keep on and work fine, but if disconect it, constantly restart again. 
    Please, could you help me? How do I solve it? The phone is barely useable after the update. Is it possible to downgrade the firmware or reinstall?
    Solved!
    Go to Solution.

    You are very welcome.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Facetime Audio don´t work with 10.10.2 and iOS 8.1.3

    Hello!
    After the Upgrade to Yosemite 10.10.2 on my Mac Pro and iOS 8.1.3 on my iPhone 5 i cannot make Facetime Audio Calls anymore. The Problem is that when i get a call or make a call i can hear the people but they dont hear me. The settings don´t change. The Microphone on my Logitech Webcam is selected in Facetime App and in audio settings but it dont works. The Microphone is not broken i tested it with Quicktime.

    i Must correct again. With soundblaster drivers deinstalled Facetime Works better as before but the bug was already there. Sometimes my voice disappeared and the caller don´t hear me.  i think there is a Bug between Yosemite 10.10.2 and iOS 8.13 and i hope with 10.10.3 and 8.2 this bug was fixed.

  • Can't call Facetime Audio contacts from Apple Watch

    Why can't you call Facetime Audio contacts from the Apple Watch? All it does is hand it off to the iPhone where I need to tap a button to call using the iPhone. Even contacts with FaceTime audio can't be called from the Apple Watch. iMessage is fine though. Am I missing something here?
    When I choose a contact from Friends, all numbers are there, but no FaceTime at all.

    You could leave feedback at:
    https://www.apple.com/feedback/
    If I had to guess at the reason, I'd say one or more of:
    - Avoiding impact on watch battery life
    - Some constraint on the wifi watch-to-phone connection (don't ask me what - I'm guessing )
    - Feature planned for the future, but Apple following its normal practice of starting with restricted features and adding them incrementally later (as, for example, with iPhone, which had very little at first)

  • Facetime on MacBook Pro, Iphone and Ipad mini no longer works?

    Facetime on MacBook Pro, Iphone and Ipad mini no longer works after years of working just fine. I get the message that I am connecting then it instantly just disconnects. Has worked fine for over two years with no issue until about a month ago?
    I have investigated and tried things like re-setting apple ID and deleting the plist file etc, nothing works.
    My Wife is having same problems in a different location so deffinatly not a problem with my wi-fi.
    help, i use this alot!!!!

    My Wife is having same problems
    With the same iMessage account, or a different one?

  • Your iphone is a mini computer, restart it !!

    Your iphone is a mini computer, restart it !!
    like any computer you have ever used....after installing new stuff or if u have problems sometimes it just needs a simple restart. hold the slep and homekey together until the phone shuts off and turns back on!!!

    Good stuff !!
    Your right !! This is not a cure-all for everything but the first step in troubleshooting anything programmable is to reboot/reset/resync !!
    Phones/computers/routers etc etc
    Surprisingly most people overlook this 1st step ?
    I've updated our 3 iPhone 3GS , 1 had sync problem, 1 a battery drainage problem and the other worked fine. A simple reset fixed all problems, although the 1 with batt problem also needed to be drained and recharged 1 cycle b4 it was ok.
    Again, this will not solve everyones issues but OMG at least try it please !!!!

  • Installed latest iOS on my iPad mini, it got stuck while restarting after update. It is still in that stage even after 7 hours.

    installed latest iOS on my iPad mini, it got stuck while restarting after update. It is still in that stage even after 7 hours.

    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

    I am unable to login from my login page after I restarted my mini mac running snow leopard 10.6 server. I am a new user. Need help

    Try clearing your cache, [https://support.mozilla.org/en-US/kb/How to clear the cache Instructions here]. Then, try going to [https://accounts.google.com Google Accounts]. If there is currently an account singed in, sign out, then back in. After that, try going to Google Adwords.

  • When i erased the data of my iphone 4s after restarting it is asking for icloud id n pwd i dont have it because it was bought second hand and the owner is not contactable.

    when i erased the data of my iphone 4s after restarting it is asking for icloud id n pwd i dont have it because it was bought second hand and the owner is not contactable.
    please could somebody help in this context.

    You've encountered Activation Lock. Read here:
    http://support.apple.com/kb/PH13695
    Without that info, you won't be able to re-activate the phone. Apple can't/won't help you with this.

  • I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

    I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.

    Then put a SIM in. You cannot activate an iPhone without a compatible Sim.
    If your iPhone was hacked/jailbroken the update restore the lock.

  • How do I get my FaceTime icon back on my iPhone 5 after accidentally deleting it

    How do I get my FaceTime icon back on my iPhone 5 after accidentally deleting it

      Obviously I need to speak another language for you.... AGAIN my intentions were to answer the original post... Obviously more than one person has had this issue... I didn't create the post! If you take the time to read what I have said, I in fact wasn't the one asking the question, I was answering it! It's funny your on an Apple forum stating that information given by APPLE is incorrect.... Mind boggling! When answering a question on a forum, there are those that will disagree with the answers you have provided..SO WHAT! My life goal is not to answer to you or anyone else's satisfaction... Get over it.. You call it splitting hairs, I call it stating my opinion...I would have had to provide a service in order to provide a disservice, to which my opinion is not!  If you don't agree with what I or APPLE has said, shrug and move on....
    Capisco; Aghju capitu; Ich verstehe ?
    Have a nice day :0)!

  • I use iphone 3GS, after upgared to ios5, my phone restart when i took picture with   button and while playing music .. what happened?

    I use iphone 3GS, after upgraded to ios5, my phone restart when i took picture with   button and while playing music .. what happened?

    Basic troubleshooting steps in the following order.
    1. Reset. Press and hold both Power and Home Buttons together till Apple Logo appears.
    2. Restore to a backup.
    3. Backup, Restore in iTunes and setup as new.

Maybe you are looking for

  • I pod isnt found by windows xp anymore

    Went to put i pod as enable disk mode for date transfer. Now i want to update my i tunes music onto it. Problem now is computer thinks its usb storage device. So go to restore it like ive beent told to factory settings. Nothing it didnt work. EDit pr

  • Camera extras doesn't work on 16:9 camera format o...

    Hi everybody, I already installed Camera Extras app on my Lumia 800, but when I try to use one of its features the camera format switch automatically to 4:3 format..... Is anybody who knows about this bug ? Thanks,

  • Range of Long type doesn�t fit

    Hi!!! I am trying to assign the following value to a variable of type long long A = -140737488355327; The compiler tells me that such integer number is too large. I can�t assign it to A. Sun�s tutorial tells that long variables can hold a minimum val

  • SB Audigy2 ZS Line-in -- -6

    Hi, Is it normal that the line-inputs 2 and 3, limits the signal to -6 db. There's no problem with the Line /Mic-input because I can adjust the recordvolume by the separate knob. Why are the line 2 and 3-inputs limited to -6 db? Or must there somethi

  • Need to add MAC address to router

    Any ideas on when you get an error message and how I remove the ACL (access control list) Try to setup the extender on the same room where the router is installed. - If MAC Access list of MAC Filtering is enabled on the router, make sure to add the M