My iphone 5 S led flashes when phone rings

iphone 5 S led flashes when phone rings and or receive a message

I have the opposite problem. When I do exactly that and activate it, the light doesnt flash. yet when I take a picture my flash works. is the iphone the problem? because it works on my son's iphone 6+ ( we both have the 6+) yes it ls turned " on "   im on Ios 8.1.3

Similar Messages

  • My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

    My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything

    I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
    Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong.

  • HT4515 What to do when phone ringer stay on mute

    What to do when phone ringer stay on mute

    So have you checked the switch on the side of the phone and it is in the proper position?  if it is you might try restarting the phone.
    Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for phone to restart (no data will be lost).

  • On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work?

    On a 5s how do you make the light turn off when phone rings or when you receive text, at work I would like to shut that off. Also seems like vibrate doesn't always work? I had a 4s and didn't have these issues

    Thank you, I did find that. Still my phone does not always vibrate when ringer is off for texts and calls, only sometimes?

  • IPhone 4 warranty/LED flash and low in-call volume

    I just got an iPhone 4 8gb, my boyfriend bought it for me from his roommate. I checked on Apple Support and entered my serial number and evidently the phone is still covered by warranty.
    I noticed that during a phone call I cannot hardly hear the other person speaking. I tried EVERYTHING, hard reset, resetting everything, I made sure to have the in-call volume all the way up.. nothing. Also, the LED flash on the camera does not work. I did not notice this until I tried to take a picture in the dark. I turned on the flash, tried it in video, downloaded iTorch and it worked on and off a few times but it is very random. Whenever I place my finger over the sensor it will come on, but turns off immediately when I take my finger away.
    Since the warranty is still valid, am I eligible to have this taken care of even though I didn't purchase the iPhone directly?

    Okay so bringing it into the apple store, I can get it fixed. But what about the registration? The previous owner is military stationed overseas and the phone is still registered in his name, he couldn't use it over there which is why he sold it to me.. but its not like I can bring him along with me in the store when I go to get the phone repaired.

  • Why won't flash go off when phone rings anymore?

    Used to be, the flash would go off when phone rang. Why'd they change that?

    Possibly you turned that feature off. It's in Settings/General/Accessibility.

  • DSL disconnect​s from internet when phone rings?

    Hi all, hoping you can help me on this.
    I'm running DSL and since this past weekend any time the phone rings, my internet connection is lost. There's no light loss on the modem, I just know when my IM  goes down or I lose a page.  I'm running a Westell 2200 modem,nothing between the phoneline and the modem, nothing between the modem and the computer. Any ideas or should I run straight to Customer Support?
    Thanks in advance!
    Edit: Forgot to add that I have a splitter on the phoneline and filter on the splitter for the phone.
    Message Edited by WiredOne on 01-12-2009 04:54 AM

    Hi Telcoguru, thanks for responding.
    I'm not sure what you mean by "in the right direction". The filters I got only went into the jacks one way,the clip piece on the male end to the notch in the female end. Is it possible for these things to wear out over time? I've been a customer of Verizon's for several years now, and have had no upgrades to the filters or modem. It just recently started happening over the weekend and I've not had a chance to call Verizon today since I posted. Thats on the to-do list for tomorrow. I just figured I'd check here first in case I did something inadvertently. However I read that a lot of customers seem to be having this problem lately, albeit in different locations. Not thinking C-O-N-spiracy, but wondering if there's any kind of work going on in all the locales, maybe FIOS wiring? Or it could be we're all working with worn-out Westells.
    One way or another, I'll get this resolved.
    Thanks again.

  • UCCX Agent Desktop v.7 taking over Windows active session when phone rings

    I'm trying to figure out how (if possible) for the Cisco UCCX Agent Desktop application from taking over a users Windows session every time the phone rings.  This is very annoying and takes the end user out of what ever application they are currently in whenever their phone rings.  Does anyone know how to change this?

    Hi Eric,
    Maybe this is better
    Miscellaneous tab options.
    Option Description
    Window Behavior Specify how you want the Agent Desktop window to
    behave:
    • Normal. The window appears when calls are
    present and minimizes when idle.
    • Keep Open. The window is always visible, but may
    be hidden by other open applications.
    • Always on Top. The window is always visible and on
    top of other open applications.
    • Stealth. The window appears as an icon in the
    system tray.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/cad_enterprise/cadenterprise7_0/user/guide/cda700ug.pdf
    Cheers!
    Rob

  • Wakes from sleep when phone rings

    Today I had the Apple USB modem connected to my MBP but it was not connected to the internet and the MBP was in sleep mode opened. When my phone rang, the MBP woke from sleep. I didn't know the modem could do that. Is there a setting I can change to stop it from doing that (without having to disconnect the modem itself)?

    I have a G5 with internal modem and recently my Mac has been waking from Sleep each time the phone rings. I don't have the system preferences set to do that (and I checked to be sure). I think it may just be since the last OSX update 10.5.7.

  • Slow internet when phone rings

    Hi all,
    I am fixing the network for a small 2-level office, which is using ADSL Telstra internet.
    #1: Level 2 only have an empty rack cabinet. I want to have Internet accessible, how can I check if this cabinet connected to the rack cabinet in the level 1?
    #2: Level 1: I've got an EFTPOS connecting to the modem on "phone" port via an ADSL filter/splitter and a Cisco IP phone connecting directly to the modem on a LAN port.
    Whenever the phone rings, the Internet connection gets very slowly. Do I need one more ADSL filter for the phone?
    And should I upgrade to cable internet?
    Any help would be great. Thanks alot in advance.

    It would compeltely depend on the configuration of the VoIP connection and any limitations in place as a result of the network of the carrier who are providing the service...  You might be best to contact the provider directly, if that is Telstra, and it is currently under a DOT / Digital Office Technology plan your best bet would be to have a word with the Business team directly or your local Telstra Business Center, they will be able to go over the options and see if they can provide an entire solution which is best suited to the business... on the phone they are on 132000. 

  • Turn off "Verizon WIreless" message when phone rings

    How do I turn off the "Verizon Wireless" voice message that occurs every time my phone rings? It is rather annoying, especially if I go in and out of service areas. Then it flips between "Loss of Service" and "Verizon Wireless" messages, sometimes 3 or 4 times in a minute.

    Try turning off the roaming indicator.

  • When Phone Rings My Wireless Network Goes Out

    I have 2.4 GHZ phones in the house and I assume that the WRT300N is running the same frequency? I am sure LinkSys thought of this and has a work around. How can I set up my Wireless Router to not go out everytime the phone rings?

    Try changing the channel your router operates on.

  • IPhone 5 apple logo flashing when on charge.

    My iPhone 5 randomly turned off last night and I was unable to turn it on. I then plugged it into a charger and the apple logo appeared and then went again. This flashing has been happening continuously - black screen for 5 seconds, apple logo for 10 seconds.
    I found that if I held the power button 3 seconds, then also held the home button at the same time for ten seconds and the released the power button and held just the home button for another 10 seconds, the flashing stops and the screen goes black.
    However, the flashing only occurrs when my device is plugged in to charge, if it isn't it is just a black screen, no matter what buttons I press.
    I looked on the internet and they all say hold the power button and home button for 6/10/12/60 seconds, which does not help. Others say I have to restore it, but I havent backed up my phone in a while and all my important photos are on there that I do not want to lose. I then downloaded the software EaseUS MobiSaver which advertises that you can back up your phone even if it doesn't turn on. This also failed to work and the software cannot pick up that my iPhone is plugged in.
    Also iTunes only picks up my device when its in restore mode but says I have to restore it before I can do anything further on iTunes.
    Is there another way to fix it without restoring?
    Thank you and sorry for rambling.

    Hi there socko0603,
    At this point, the next troubleshooting step is to restore the device in iTunes, there is no way out of Recovery Mode without restoring. Take a look at the article below for more information.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    If you continue to experience issues, take a look at the article below for some additional troubleshooting steps.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    -Griff W.

  • My iPhone 4 takes pictures when phone rings and alarm goes off.

    My camera flash goes off when I receive an incoming call and when my alarm goes off.

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    Have you tried ALL the troubleshooting steps?  If you have and you're still having problems, then you'll need to bring your phone into Apple for evaluation and possible exchange.

  • Can an iphone app be started automatically when phone powers on?

    Hi All,
    I have a simple app that I have run on the simulator. I am wondering, is it possible at all with an iphone to configure it to automatically start up an application when the phone is powered on?
    Thanks for any info!
    ~New Developer

    No.

Maybe you are looking for

  • IBooks Author in-line tables are being cut off

    iBooks Author in-line tables are being cut off at the bottom of a column, instead of flowing to the next column, or moving the entire table.  The entire point of marking a table as in-line, is to get it to move as text is inteserted before it.  But w

  • Newbie trying to get a flash ad swf to loop

    Hello, I am a designer trying my hand at flash animated ads for the first time and can't do what is probably the simplest function imaginable. There is a tile ad on ingoodfaithwyoming.com toward the bottom of every page. It's a simple ad but I cannot

  • I click on one music video but a different one plays

    I just downloaded a music video from the iTunes store, and I tried to play it. When I clicked on the thumbnail in iTunes, a different music video from my library played. I tried this for more than a dozen different music videos in my library, and in

  • Standby Database (bis)

    Hi, I have just create a new standby database on unix machine, I had read the Oracle documentation, but I have a problem : From my client PC, it seems that oracle want to connect to my standby database when I want to connect to prod. I have an error

  • Is Anyone Else's iPhone 5 Having Slow Safari?

    It had been running perfectly until Monday, Safari and Instagram were very slow. Instagram is a little better now but Safari is painfully slow. I have Sprint.