My iphone 5's screen is broken after coming back from mail in service...What happened?

I just got my iPhone back from mail in service through applecare and the screen is shattered! I refused service because they wanted me to pay for it and so they sent it back. I originaly sent it for them to fix the microphone because it stopped working, and then i got an email saying they found accidental damage. There was a picture on the support page but it wouldnt load. So what the heck happened to my iphone because I know I didnt send it like this.

sounds like in the mail it broke

Similar Messages

  • Satellite P850-30W - Fan does not run after coming back from sleep mode

    I got a Toshiba Satellite P850-30W with bios 1.90.
    Sometimes the fan does not run at all after coming back from sleep mode on windows 7.
    This has happened twice (maybe more times without me knowing), and Ive had the computers for a month.
    Normally the fan starts running when the CPU gets over 50 celsius, and stops under 50 celisus...
    I tried running Prime95 when this fan-issue occured and the computer temps got dangerously high (close to 100 degree)! the fan did not start at all
    ...this error could potentinally damage the laptop...
    to get the fan running again I have to restart windows
    anyone else experienced this?
    I guess the fix would be to never use sleep-mode...or toshiba needs to fix it with a bios update.

    What kind of answer do you expect here in user community?
    Exact info about the fault? I dont think that somebody would be able to provide exact answer but just speculations
    In other Forum you can read about Satellite notebook; but is it exacts the same model?
    No, it seems to be an L650 series. Its completely different series .
    From my opinion its not software related problem.
    BIOS issue?
    Well, in case it would be a BIOS issue, the problem would appear always and not sometimes after being shut down 200 times.
    It could be a hardware related issue. Memory? Maybe
    In my personal opinion to get more details hardware diagnostic software should be used in order check the hardware for possible malfunction. Thats my personal opinion

  • TP Yoga 15 - Windows: Keyboard response too slow after coming back from hibernation

    I've got the same issue as outlined in this thread for a Y50 - there seems to be a BIOS update to solve it, but what about TP Yoga 15? Quote:Simply put, In keyboard properties , the Repeat delay is default at maximum (eg, holding down a keyboard button and how fast it generates the key strokes). When the system is put in hiberanation, then turned on again to come back, the Repeat delay some how gets decreased to about 2/3 of what it originally is. https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/Re-Y50-Windows-8-Keyboard-response-too-slow-after-coming-back/td-p/1676309/page/1 

    hi guys,
    Can you please provide also these additional information:
    (this is to check if the issue is isolated to a certain model number)
    Model Number (eg. 59-xxxxxx): 
    Place of Purchase (eg. Amazon, Bestbuy, etc.): 
    In addition, the solution from this thread seems to be a good workaround (the app is for Win7 but may also work for Win8.1)
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Iphone 5c won't turn on after a night of being charged. What happened and how do i fix it?

    I had my phone on the charger all night to wake up this morning to it not turning on. I got this phone recently and havent done anything to it. Why wont it turn on and how can I fix this?

    Hi dancebaby,
    Thanks for visiting Apple Support Communities.
    Start with these troubleshooting steps if your iPhone does not turn on:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Best,
    Jeremy

  • MBP 17 2009 LCD does not turn on after coming back from sleep

    Hi,
    I feel like crying.
    I bought my 1st Mac 3-4 days ago and I have not regretted anything more than this.
    1st some mov files that Quicktime windows can play but Mac does not (feel like pulling my hair why as the videos with same settings taken with same camera before I got the mac work perfectly from flash drive.
    2nd the nVidia 9600m stopped being detected no matter what I did, next morning it magically re-appears (alongwith many things that vanished magically for e.g. options on right clicking images never came)
    3rd the MOST BUGGING AND CONSISTENT
    I close the lid, it goes to sleep. It has never come back from sleep. The screen will never turn on. Then I force shut down keeping power button pressed. And even after 2-3 restarts the screen doesn't come up. I wait for 2 min and then start. It starts working.
    ANY IDEA WHY?
    I use a usb mobile braodband modem (Huwaeii telecom's) and have a silly feeling maybe that might case something. But even that doesn't.
    My next guess is temperature. I am working in 30-40 degree celcius room temprature range. Maybe that is it.
    I think Mac is overrated and it breaks my heart saying that as I spent $2300 over it which is a HUGE amount in my part of the world. I needed it for Final Cut Pro.

    I am sorry I do not understand the response. You're saying this is a known issue? Or are you suggesting/asking "IF" it is an OEM issue?
    Because the whole problem I have is the "IF". I am not able to comprehend what is the problem.
    And Yes the machine is 6 days old. Calling technical support doesn't help.
    Apple doesn't look obsessed about customer satisfaction in India (My Luck i bought it from the only iStore in my area, hope they correct it).
    The nVidia 9600M is sometimes there sometimes not. Lately even simply starting the machine does not make the screen turn on.''
    Is there a debugging to-do list? Oh I am so "OS X"-impaired.
    Thanks,
    Rachin

  • Black screen after coming back from standby

    Hi people,
    Today after I put my computer to sleep in winxp, when I tried to wake it up, it gave me this black screen(the screen is off), the sleep LED light is off, but I can hear the system running. When I close the lid, the LED light is on, but when I life the lid, the light went off again. Pressing the power button did nothing. Pressing the dimmer screen or dim keyboard buttons didnt work. I've to force shut up my computer. Please help. This worries me. Thanks.
    Also another bug in mac os x. After restarting from bootcamp winxp to mac os x, my screen resolution is wrong, it has black area on the top and bottom of the screen.

    Update:
    My files were saved last time, but the file is not updated when I rebooted back in xp.
    Today my winxp went to sleep, and I clicked the mouse a few times to make it wake up. But it froze on the log in screen, though I never set windows to log out and it always did that after I put it to sleep. Now that I think of it, I had no problem making it sleep and logging back in before. I saw this problem since yesterday. I haven't install or make any changes to my os x or winxp. My winxp is installed with service pack 2, and I haven't update it since then. I don't know if it's necessary. Any advice?
    Message was edited by: nobutan

  • Creative zen V+ still not working after coming back from assistance for the second ti

    hallo, what thje hell is happening with creative Zen V+ I got it back from assistance for the second time and it's still not working!!!!!!!!!!! I want my money back now, I'm gonna spam the whole of the internet with this unfunny joke, what the hell I'm suppoised to do I really fed up, since I bought the unit it worked for less than one month and for another one it's been back to the assistance for two times!!!! And still it's not working!!!! Now let me tell you this creative zen V + is a worthless, costly, cheap piece of crap, and I mean crap, what the hell am I supposed to do now Send it back for the third time 249 euros for this crappy piece of cheapo plastic Please is it allowed me to send it back and having in change some olther player I don't mean it to be trendy or flashy or all of the usual marketing **bleep** coming with these, I just want a player that actually play my music, a player I can load all my music without the application to freeze, the player to freeze and me having to format and reboot again and again. Is it creative capable to accomplish such task, do they still know how to build an mp3 player that actually work without me having to buy and install windows vista Or they don't Do creative have some old player still in stock zen touch wasn't stilish but worked well until the HD dyied, zen V plus isn't working as it is supposed to do, plain and simple. What do I have to do now in case you are wondering the malfunction is still the same.

    For the Zen V, as it states on the box, you need Windows XP Service Pack or 2, or Windows Vista. You also need Windows Media Player 0 or . As long as you have that, you should be fine there.
    You may also have a corrupted file that is causing the problem. Try not transferring them all at once, transfer it in blocks instead. If one block fails to transfer, try and narrow it down and see if it's a specific file in that block causing the problem.
    When you try it on another PC, do be sure that PC meets the system requirements, especially the Service Pack if it's Windows XP. You'd be shocked how many times people try it on a 2nd computer, get angry when it doesn't work, call tech support, and find out the 2nd PC doesn't even have SP on it.
    All else failing of course contact Support. They can't help you if you don't let them know what's going on, and if you don't yell at them they'll do their absolute best, trust me.
    Good luck,
    Dale

  • Re: Y50 Windows 8 : Keyboard response too slow after coming back from hibernation

    I also have this problem.
    Lenovo Part #: 59421845
    Model: 20378
    Purchase from: Replacement/Exchange from Lenovo
    I wish I saw this thread before I did a factory restore. Ohh well, atleast its somewhat comforting to know I'm not the only one having this issue. I initially blamed the problem on my Razer Orochi 2013, but turns out that wasn't the issue.
    And I agree a proper fix is needed, wether is be some kind of BIOS or Driver update, but not some 3rd Party work around. For a $1,200+ laptop, this shouldn't be something that just get's swept under the carpet with a "temporary fix".
    Please keep us up to date on the status of this issue Lenovo.
    EDIT: Using this post as the first in the thread for escalation purposes - Amy_Lenovo

    When I put the Y50 to sleep or hibernate and then wake it, the keyboard refresh rate defaults to incredibly slow speeds.  So when I hit and hold backspace, it only removes 3 characters a second as opposed to 15-20 per second like I desire.  The only solutions are to reoboot or go into keyboard settings in the control panel and save the settings again.  The settings don't actually change, so just opening the settings and hitting apply is good enough to fix it.  This is obviosuly a software bug and others on online forums are experiencing the same issue.  If anybody else is experiencing this bug, please post here so Lenovo might take action to correct it faster.  Lenovo, if you're listening, please offer us a solution.
    Moderator Note; subject edited; post merged in

  • After upgrading to 10.6.6, major problems coming back from sleep mode

    I updated my macbook from 10.6.5 to 10.6.6 and now it is unresponsive frequently after coming back from sleep. The computer stops responding and I have the spinning beach ball on the screen forever. I couldn´t find any correlation with the programs I am running.
    I used Onyx to clear all caches, rebooted, etc but nothing seems to help...

    I have the same issue, I've found though that it seems to happen only if i goto sleep mode after logging out of my mid-2010 MBP. As long as I remain logged in and put the MBP to sleep it does not lock up with the spinning beach ball.
    This lock seems to happen just as I click on my name to login after waking my MBP from sleep.
    I have no peripherals, except maybe the power adapter, but it seems to happen regardless of if the power adapter is plugged in. I've done repair permissions in safe mode as well as disk scans.

  • I have purchsed iPhone 4S from US. Now my screen is broken and want to get it repaired. What will the cost and time taken in repairing of the same in India. I came to know that if iphone is purchased from US it cant be repaired in India. Is it true. If ye

    I have purchsed iPhone 4S from US. Now my screen is broken and want to get it repaired. What will the cost and time taken in repairing of the same in US.

    You cannot get warranty or out of warranty service in India on a US purchased phone. The warranty on the iPhone is not international.

  • My iphone 3gs glass screen  is broken

    My iphone 3gs glass screen  is broken ,how much money do i need to replace g it?

    These guys could help you out I've been using them for my apple repairs they do a great job and are fast. http://www.igadgetresq.com

  • But if I drop the iPhone and the screen is broken, is in warranty?

    but if I drop the iPhone and the screen is broken, is in warranty?

    No.
    Like any other warranty on any pther product, damage is not covered.

  • Hi, if IPhone 5 was manufactured in 2013 (after release of IOS 6.1.4) what would release date of be iphone written in IMEI info? 2012 or 2013?

    Hi, if IPhone 5 was manufactured in 2013 (after release of IOS 6.1.4) what would release date of be iphone written in IMEI info? 2012 or 2013? Please answer. Thanks.

    Hi ttechnoffreak,
    First I would suggest signing out and back in to the iTunes Store by using the same account and following this article:
    iOS: Changing the signed-in iTunes Store Apple ID account
    http://support.apple.com/kb/ht1311
    Restarting and/or resetting may also help:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Cheers!
    - Ari

  • Hello,everyone.i purchased an iphone 5S from a retailer in my country after coming back to my home i restore this iphone it shows an activation id but i dont know what i have to do now?my apple id does not work in this situation.kindly help me out

    Hello,everyone.i purchased an iphone 5S from a retailer in my country after coming back to my home i restore this iphone it shows an activation id but i dont know what i have to do now?my apple id does not work in this situation.kindly help me out because it cost me to high and if this is not activated i have to bear a huge loss.i am a loyal customer of apple from a past 5 years.thank you for your cooperation

    Yes, this is activation lock. Return the phone for a refund, as it is useless without the activation information of the previous owner.

  • My iphone 5s got stolen and the option to erase data after 10 tries was not enabled. What happens after the incorrect password is input after 10 times?

    my iphone 5s got stolen and the option to erase data after 10 tries was not enabled. What happens after the incorrect password is input after 10 times?

    After the sixth erroneous passcode entry a delay is imposed that increases exponentially and eventually reaches over 40 years before another attempt can be made.
    No one yet knows how long the next delay is.

Maybe you are looking for