My iPhone 5 shows weird behaviour.

I bought a new factory unlocked no contract iPhone in Pakistan. The phone is from the United Kingdom, the first thing I would like to tell you that this phone has dreadful battery life, the battery drops 1% every minute when I'm texting and while I'm on facebook, drops even faster when I'm playing some game like Asphalt 7 (this is acceptable but the battery drains faster than my iPhone 4S) moreover the phone shows weird behaviour, sometimes when I charge it to 100%, it stays there for some time but then suddenly the battery drops to around 70% within an instant and sometimes when the battery is low and I plug it in, the battery percentage suddenly jumps from 18% to around 40% and this happens the moment I plug it in (both the computer and the wall charger) and the last thing is that this phone charges amazingly fast like from 2% to 1% in about 30 minutes. I saw a video on the internet for reference and in that video, the guys' iPhone 5 charges from 5% to 100% in 2 hours and 10 minutes. So could something be wrong with my battery or charger or both ???
I have Brightness set to auto and I mostly stay indoors
Location services are off
Diagnostics and Usage are set to Don't Send
iOS is 6.1.4 (the latest available)
Push Notifications for all apps are off
WiFi remains on most of the day
3G is set to off as it is not available in Pakistan
Cellular Data is off
Bluetooth is off
Time and Date automatic adjustment is off
Mail is set to Fetch Manually
Only 2.5 GB storage is in use
and I set it up as a new iPhone and I've restored it 3 times in just 1 week.

How would I know when the battery is totally discharged to 0? Because all it shows is this

Similar Messages

IPhone not showing up in iTunes or shows up as "imaging device" - Win XP

SOOO glad I waited in line for several hours today!!!
Anyone having issues with getting the iPhone to show up on a Win XP Pro machine??? I have tried to get the iphone working on two separate laptops, one a Dell M70 and the other a Dell M60, both Win XP Pro SP2.
I've gone thru all the self help steps, including re-installing iTunes. I downloaded it today.
On the M70... the device is recognized by Windows, but the computer treats it as an "imaging device" and iTunes does not find it.
On the M60... the device isn't even found. when I plug it in, I get a weird quick double beep sound, as opposed to the normal sound when plugging in a device to the USB port. About 30 seconds later, it makes the disconnect sound. All the while without disconnecting.
I'm thinking this sounds like a lovely trip back to the Apple store tomorrow. Oh joy.
Dell Precision M60 and M70 Windows XP Pro XP Pro SP2

I saw this too - but closing iTunes and re-plugging the phone seemed to work for me. I seem to have the best luck when I plug in the phone with iTunes not running and allow it to open after the iPhone is connected...
Good Luck!
Stac

Error and weird behaviour in executable launch

Hello folks,
This post is regarding a weird behaviour i am experiencing with an executable i built.
LABVIEW version(Includes Runtime engine) LV2012 SP1 f3
DAQmx: 9.6.1
The behaviour is listed below in detail.
In a nutshell, the exectuable runs on the development computer but does not run on the Target computer. Also, Irresepctive of which PC i run the executable on, i cannot access the block diagram even after enabling debugging everywhere.
On the target PC, the app fires up but does not run further, no error codes appear on the screen, it's like the app freezes after firing up. And to add to the misery, i cannot access the block diagram to debug and know what's going on.
Also, I have tried including the dynamic vis to my build script. No bueno.
What I see on running the app is addressed below:
TARGET COMPUTER:
DAQmx 9.7 and LV2012 SP1 f4 RTE have been installed manually.
App does not run: No broken run button, the app launches but does nothing when the vi is run. No error messages.
The block diagram is still inaccessible, even after selecting the “Enable debugging” option in the build specifications.
DEVELOPMENT COMPUTER:
The app launches and runs perfectly.
The block diagram is still inaccessible, even after selecting the “Enable debugging” option in the build specifications.
DAQmx 9.7 and LV2012 SP1 f4 RTE were not installed as the app recognized the already installed Labview environment.
Additional steps that I have tried,
Created and ran only an executable on the target PC, the attempt was unsuccessful. The vi showed similar characteristics as mentioned above in the target PC section.
Created and ran an installer with additional install options(LV2012 f4 RTE and DAQmx 9.7)on the target PC, the attempt was again unsuccessful. The vi showed similar characteristics as mentioned above in the target PC section. No error messages.
Tried both the steps mentioned above on the development computer and the attempts were successful. .
To the best of my knowledge, I believe, the issue here is with the environment I am creating for the executable and the installer to run with/off of. After having carefully followed the installation procedure for the Run-Time Engine and the DAQmx drivers, I still do not know what I am missing.
Please advise.
Thanks guys,
RP.

Hey guys,
So, got the application to work. Almost.
The problem was that the executable was missing the hardware config from the Device.
Now, the new issue is as following:
The goal of the vi is to generate a report of the test conducted. So, the way the vi works is that, the second the vi is run, an empty word file is created with only the company logo,
Field headings, which are populated after the test is conducted.
The logo is a .jpg file, which has a relative path into the executable.
The field heading are String constants wired into a 'concatenate strings.vi' which are in turn wired to into the report generation vis.
What's happening is that when i run the app on the target pc, Only the logo appears on the word template. Even when i conduct the whole test and stop the vi, the results aren't populated in the word file. Which is a little weird.
Does any one know whats doing that?
Please refer to the attached word files.
Right - It is the file format desired.
Wrong - It is the file format achieved.
Please advise.
Thanks,
RP.
Attachments:
Right.docx ‏17 KB
Wrong.docx ‏16 KB

Iphone is showing up green

When I'm in messages one of my contacts is an iphone but shows up green . I've tried restarting even updating and I did go to settings to make sure iMessage was on and connected to my Apple ID. The weird part is all the other iPhones In my contacts are blue just not this one. The person showing up green also has all the other iPhones show up blue in messages, but both of us look green to each other. We also have facetimed each other and that worked. We both have iphone 5s s. Please help, thank you

using imessage your text bubble should be grey to them i do believe.

Weird behaviour in the Fontbook display pane

I have just been checking through some font conflicts using FontBook. All have resolved successfully, but I have noticed weird behaviour involving four or five fonts. Some of them show up as all-Cyrillic faces (Arno Pro), or all-Hebrew faces (Stone Sans) or all-Arabic faces (Balzano) in the display pane, yet print perfectly as Western characters when used in any program (Pages, Word, Bean, FCE, Keynote etc).
It's not actually causing any problem, I suppose, apart from a weird representation in Fontbook. I have tried deactivating and reactivating these fonts. I have tried quitting and restarting Fontbook. I have even tried restarting the computer. The Cyrillics, Hebrews and Arabics keep coming back.
Is this a known Fontbook bug, or am I doing something wrong?

Thank you, Kappy and Tom:
I tried the Preview Repertoire command and it showed that the fonts did, indeed, have the full Latin complement of characters. It's just that only the Cyrillic/Hebrew/Arabic/Gujarati/Mandarin selections are showing up in some fonts' preview panes: particularly those fonts with the suffix "Pro" in the title (Myriad Pro, and so on).
How strange.

[SOLVED] Weird behaviour after formatting USB installation media

Hi, I have noticed this weird behaviour with USB drives I used to install Arch linux with. I format them using fdisk and mkntfs but after replugging them in, the udevil daemon mounts them again as ARCH_2013...[something] and even the directory tree exists! This happens also when I use mkntfs without the -f flag (initializing with zeros). I also checked the other files in /dev/sd* in order to make sure that my drive does not appear twice, but there is only sda (my HD) and sdd (or sometimes sdb, sdc,...) which must be the USB drive, also according to dmesg.
Any ideas?
EDIT: I wrote something about not seeing any files when manually mounting but that was my bad, I only tried mounting /dev/sdb1 but mounting /dev/sdb brought me the same files as devmon showed.
Last edited by ysetdng (2014-07-12 22:36:46)

I am assuming you used dd to write the image to the disk. You can use it to remove the contents of the disk as well.
You should make use of the arch wiki, it is quite helpful.
https://wiki.archlinux.org/index.php/US … tion_Media
You can use this to zero out the entire device:
# dd if=/dev/zero of=/dev/sdx bs=8M // x is the letter assigned to the usb drive. Be careful, The dd command is destructive.
It may take a while to zero out the entire disk, depending on the size. After that use fdisk/cfdisk or gdisk/cgdisk to create the partition table and partition.
To create the filesystem type, this one, ext4:
# mkfs.ext4 /dev/sdx // or create a vfat
then create the label:
# e2label /dev/sdx1 USB_STICK_LABEL
Use my suggestion as a last resort. Read the wiki, most of what I have said is in there anyway.
Last edited by rgb-one (2014-07-12 18:21:18)

Weird behaviour with inlined SubVI's

Every now and then I've ran into some serious weird behaviour where I've eventually traced it down to some inlined subVI. It has seemed as if the values used inside the inlined subVI don't match what the calling VI is feeding into its inputs. I haven't been able to consistently reproduce this issue so I apologize for the vague description, but since I felt I should finally address this and I couldn't really find anything similar by searching, I'll do my best to describe it and we'll see what turns up.
As I mentioned, the issue certainly doesn't occur consistently. I use inlined subVI here and there and most of the time there are no problems whatsoever. I ran into the issues randomly I think four times now, first three of them were on LV2013 and this last time on LV2014. In all cases I have been using AF and I think the first times were actually with an actor class. At the time I thought it might have been related to the AF, and it still might, but now the last time it wasn't the actor class itself but a data member of one. So far all of the problems have occured with class methods, and I think the "corrupt values" have been the object private data, but I can't confirm this.
This time the inlined subVI was a static dispatch method with contents shown below on the left and the calling on the right.
I'm showing the calling just to point out that when I was investigating the problem and I probed the object wires before and after the inlined subVI the values (Calibration.X Step and Calibration.Y Step) were OK, but the result of the VI (Point out) was some insane value as if the actual division inside was performed by corrupt data. I think that the output value wasn't Inf, though, so the divider might not have been a default value such as 0.
Other notes:
I checked that the wires are connected to the inputs and outputs
As I mentioned, the projects have always been relatively large AF setups, the problematic method has been an actor method or a method called by an actor somewhere down the chain. I have no reason to assume AF is the culprit, I'm just pointing this out, just in case
The problem seems to occur quite randomly but once it "starts" it doesn't go away until I find which inlined subVI it was and change it to a normal VI call
The problem might not even be specifically inlined subVI related but for example pre-allocated VI related instead
I don't know whether the problem would occur in a built executable as well, so far I've only ran into them while testing while developing and fixed them there
Looking at the "Known Issues" related to inlined subVI's I don't know if this related to them. The other one deals with execution systems, which I haven't touched to my knowledge, and the other one says "An Inline public methodVI calling a private-scope method VI, inlined into a non-class caller may give a runtime error when trying to call the private method from the inlined code in the non-class caller."
LabVIEW version is 14.0.1 (2014 SP1 32bit) on Windows 8.1
Yep, reading through this post I gotta say I'm not expecting much, what a mess, but it would be great to find out if anyone else has ever ran into similar problems or has a clue what's going here.

Just for the sake of your sanity, I've seen "funky" behaviour with inlined VIs also, but on Real-Time targets.
I've never been able to narrow down the exact problem but it seems to be related to changed made to inlined VIs not being reflected in the compiled code od VIs which call them.
I've reported it but without code which can actually reproduce it, it cannot be fixed.
Say hello to my little friend.
RFC 2323 FHE-Compliant

List View in ios8 on iPhone only shows 1 year

List view in ios8 on iPhone only shows 1 year. Earlier events are there, and you can see them in other views, but not in List View. Any ideas?

OK, I solved it. Here is the solution if you have precisely the problem I had.
1. On the iOS device: delete the iCloud account.
2. Go to the Apple ID website and make sure the ONLY email there is the me.com email and that it is set as primary. If you Mac.com email is listed as a secondary email THIS will cause the problem. So delete the Mac.com email.
3. Log back in to iCloud on the iOS device.
Only you wanted to use the Mac.com address and not the me.com one, you could follow the above instructions just swapping me and Mac.

My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help

My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help

Hello ashbyy123,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Have a nice day,
Mario

On updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.i cant see menu page on display screen

on updating my iphone it shows no network inspite the sim inserted,now it also not working with itunes.
i cant see menu page on display screen

http://support.apple.com/kb/HT1808

How do i get songs that i purchased on my iphone to show up in my itunes library

how do i get songs that i purchased on my iphone to show up in my itunes library

Just plug it into your computer and you should get the option to transfer purchases

So I keep trying to sync music to my iPhone from iTunes, and whenever I select the album the sync goes by really fast and nothing goes onto my phone. Then when I click "On this iPhone" it shows the songs, but they're grey, and I can't click on them. Help?

So I keep trying to sync music to my iPhone from iTunes, and whenever I select the album the sync goes by really fast and nothing goes onto my phone. Then when I click "On this iPhone" it shows the songs, but they're grey, and I can't click on them. Help?

Ok, sorry. And yes, I just restored my iPhone as new and tried to put all the songs on there before I even restored with my previous backup, but it still does the same thing... even when I just checked the option to sync only "selected music or videos". How's that possible?
P.S. After I tried syncing with checked songs only, nothing showed up under Music on my phone and this message popped up in iTunes: "The iPhone "..." could not be synced because the sync session failed to finish." If you could, please tell me what that means, thanks.

When I try to purchase an app using my iphone it asks me for a password for the wrong email address. How do I reset my iphone to show the correct email address/apple ID

when I try to purchase an app using my iphone it asks me for a password for the wrong email address. How do I reset my iphone to show the correct email address/apple ID

Thanks for your reply. Having read through relevant topics it suggests that if I sync my iphone with the correct account on my pc it should use that one thereafter. i will try both.

HT1414 I'm trying to restore from an earlier backup but my iphone only shows the most recent. I'm on Windows Vista and found the backup folder. If I delete the recent files, will it force the iPhone to backup from the next older file? Why doesn't it show

I'm trying to recover a file and the app company said to restore from an earlier backup. My iPhone only shows the most recent backup. I've been searching the net for answers - I found the back up file and date sorted them (over 6mb of files). How can I get my iPhone to restore from an earlier backup?
I am on Windows Vista so I don't have Time Machine.
I have backed up the backup folder so if I mess it up, I have it in a separate place.
Can I just delete all the files with todays date in that backup folder and have it forced to the next oldest date?
Why doesn't the iPhone show a list of the least several backups.
Info:
iPhone 4S
Software version 5.1.1
Backed up to computer through iTunes (not iCloud)

As you backup the iPhone in iTunes, it overwrites the last backup. Files are kept as they are changed, so that would explain how you get different dates in your backup folder. The only backups that are saved and not overwritten are the ones done just prior to a restore. You do have the option to go back in time on a Windows computer, however depending on the last time you set a restore point in Windows, it could be back further than you are willing to go.

I had over 200 e-mails. I went to my webmail and deleted most of them. However, my iPhone still shows 200 e-mails. How can I force my iPhone to update from the e-mail server? Or will I have to delete each e-mail from my iPhone as well? Thanks.

I had over 200 e-mails. I went to my webmail and deleted most of them. However, my iPhone still shows 200 e-mails. How can I force my iPhone to update from the e-mail server? Or will I have to delete each e-mail from my iPhone as well? Thanks.

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

My iPhone 5 shows weird behaviour.

Similar Messages

Maybe you are looking for