My iphone 5 was working fine, I went to make a call and black vertical flashing was on my scree, I also cant use my touchscreen. How can I save my pictures and viideo? :( I tried plugging my phone into my laptop, but it says no pictures are found, help
Help
Dear brothers
Thanking you so much to be interested about my answer but what I figured out is as long as you bought your iPhone from gulf or Arabian area it will not has face time application cause I think apple has made special software for Arabian areana to privent facetime according to special request by phone cells companies and one of my friends has told me if you want to make sure that your iPhone not for Arabian areana you should check the model number on your iPhone backside if it ends with 29 it means it's for Arabian countries if other numbers it's gonna be for US. Or Hongkong so it's ok
That's all I could know if you have another solution just please let me know
Thanks for all answers
Similar Messages
-
I have over 300 pictures on my phone...my question to someone iphone savvy is why, when I plug my phone into the computer is iPhoto showing no pictures? I want to delete them for space issues. Thanks
I've seen this happen when the phone was encrypted... Other than calling apple/deleting passcodes I don't know of any solution.
If you're keen on waiting, upload your photos to dropbox, that's the way I do it. -
I currently have the iphone using imei is 013428003820386. I'm using normal. When I plug the phone into the laptop to copy the photos to your computer system requires update to the latest version. I agree to the machine but when the update requires activation by icloud account. I logged in with my account but still not activated and security. My account is being used to send mail me this log. I respectfully request that you can help me to reactivate my phone. Thank you very much. I swear this is my phone and I have been using previously. Thank you, thank you
Don't post personal details on a public user to user technical support forum where nobody can help you.
If you want help, then contact Apple directly, but not here on a public user forum. -
my iphone5s is dead...plugged it into computer to charge, and it says "internal device error" how can i fix....i already tried plugging it into all other ports
tried another computer?
if it works there then your itunes install have gotten defect -
When insert my lexar USB flash drive I get the message that the disk was not readable by this computer. It has worked previous to this and I do not want to lose the data by reformatting the drive. How can I reformat this drive and not lose my data?
You can't reformat it and not wipe everything on it.
Have you tried a different USB port?
Only other option, back it up on a different computer. -
How can I save my media and photo data before restoring? My phone screen is blocked on "plug to itunes", thanks
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?
I have an intel iMac OS 10.6.8 with iTunes 11.0.2 and an Apple TV with software 5.2. Home sharing worked fine until I added a VoIP device to my wired ethernet network. Now Apple TV cannot recognize my computer. How can I reconfigure?
-
I use a translation stage for the experiment.For each user in the lab the stage position (to start an experiment) is different.I defined one end of the stage as zero. I want to save the position , date and time of the stage with respect to zero.I want all these in one file, nd everytime I run it it should save to the same file, like this:
2/12/03 16:04 13567
2/13/03 10:15 35678
So I will track the position from day to day.If naybody helps, I appreciate it.Thanks.evolution wrote in message news:<[email protected]>...
> How can I save my data and the date,the time into the same file when
> I run this VI at different times?
>
> I use a translation stage for the experiment.For each user in the lab
> the stage position (to start an experiment) is different.I defined one
> end of the stage as zero. I want to save the position , date and time
> of the stage with respect to zero.I want all these in one file, nd
> everytime I run it it should save to the same file, like this:
> 2/12/03 16:04 13567
> 2/13/03 10:15 35678
>
> So I will track the position from day to day.If naybody helps, I
> appreciate it.Thanks.
Hi,
I know the function "write to spreadsheet file.vi"
can append the data
to file. You can use the "concatenate strings" to display the date,
time as well as data... Hope this help.
Regards,
celery -
Why can't I buy any app ? Iv tried creating a new Appel account ect but it says the same thing everytime . Sorry your payment was declined . How can I sort this ? Please help
- Try another payment method.
- Contact iTunes
Apple - Support - iTunes - Contact Us
- Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card -
How can i save the output array of the invoke node "commands values" into a specific file
I must save the setup of vi commands'. I use an invoke node called "command value" wich give me an array with the name of the specific command and his value. How can i save this array into a specific file to load it later if o need. Must i change the array format?
Thank youHi,
I have attached two VIs.
The first one "Ecriture fichier tableau" (writer) permits to collect all control's values in an array (dbl) and to save it as .bin file. You had to convert variant type into dbl type. (You can do the same with string type if you wish. You will save datas as .txt file for example)
The second VI "Lecture tableau fichier" (reader) permits to retrieve all the datas you saved in the file.
I think this responds to your question.
Regards,
Attachments:
Control values.zip 26 KB -
The screen on my iPhone has gone black while I was using it. It just "shut off". The phone is still working as I can hear/see it when it plugs into the computer, but the screen just wont turn on. I've tried the soft reset "holding down home and lock screen" and i've tried to restore settings. I went to the apple store and they said I had to send it to my provider (in another country) but my phone contract has run out.
Is there a way to fix this?
If not, is there some way apple can replace the phone? It's less than 2 years old. Surely the screen shouldn't just give out like that.
Thank youYou wrote...
' What can I do to solve this'
What have you tried...?
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New... -
Ok I have an Iphone 5.
My husband installed IO.7.
(He's no help. He is a Pc user).
I do not know which number after that.
I bought a desktop 27.5.
I was told at the Apple store to go home and hook up my IPhone 5 to my desktop.
To connect to I tunes,plug in my phone to the back of my desktop, and to follow instructions.
I could not find any instructions anywhere in Itunes.
Then I happened on instructions in Safari.
Are you kidding me. I could not understand what to do. Except to go into my phone and click on to Icloud
backup in settings. But, as soon as I put the usb cord into the desktop, it took me away froom the site, and the words backup now!
I bought Apple because I realize, I have no technical experience!
HELP!!??First of all, you should always save you photos on computer like any other digital camera.
Backup on iCloud or iTunes only backup your Camera Roll. The other photos should be already on the computer.
Note: Photos are not saved in iTunes, it's only a conduit between your iPhone and your photo managing software on computer.
What computer do you have? -
When I plug my phone into Dell laptop to update or sync computer shuts down
I'm trying to sync my iPhone with my outlook contacts or photos and plug my iphone into my DELL computer.It first recognizes the hardware and then computer screen goes blank saying that "beginning to dump physical memory" and "computer was shut down to prevent further damage". It happened to me when I just purchased a defective iphone. Once they replaced it with the new one, the problem was resolved. A couple of months later the same problem started again.
Is there anything anyone can suggest to do? I really want to keep my iphone up to date and sync with my outlook contacts and calendar...I have exactly the same thing with my new iPhone when syncing to my Dell XPS; now on my second phone handset too. The same message comes up in a blue Dos screen.
Can we have some serious replies please! this is a £2500 laptop, not a toy! -
So I Just Got My Iphone Back From The Store Fixing It , And I Just Got It Back In 4 Months , And As Soon As I Got It I Had a passcode i put on it and i tried to many attempts and it was disabled for 60 minutes , after the time was up i tried again and now its disabled and says connect to itunes , can someone please give me some brief instructions please i really want to get my phone unlocked!
put it in recovery mode as explained here:
iOS: Unable to update or restore -
i have previously had computers authorised for itunes but all have been thrown away or are now so broken that they do not even turn on! Please can someone tell me how I can de-authourise them and authorise at least 1 new computer? I have lost alot of music etc from CD's but I'd at least like to be able to get back what I bought from itunes.
Many thanks for your help.Follow the instructions in the article from which the question was posted to Deauthorize ALL computer then authorize the one's that you actually have/use.
Maybe you are looking for
-
I copy music to and from my N9 (from Mac OSx 10.7 Lion) using the phone as a Mass Storage Device. Recently I deleted a folder from my N9 Music folder. The folder was the Artist, inside that was the Album and inside that was two MP3 music files. The m
-
Many times a day i have to disconnect the wifi then reconnect
for some obscure reason, when working, the wifi just stops... it shows that it's connected in the bar besides the clock. but it just dont work. the only solution is to deconnect then reconnect... i look, read and took part in a couple of discussions
-
Substitution-Strings in external JS-Files
Hi, can anybody tell me how to include external JavaScript-Files? When loading them in "Static-Files" Substitution-Strings like "#WORKSPACE_IMAGES#" or "&WORKSPACE_IMAGES." are not working. Thanks for your help!
-
Hi, Is it possible to call the Mail service using receiver HTTP Adapter? Appreciate your help... Thanks, kumar.
-
We are using the ADF polling component to execute/monitor a long running job of generating 2,600 reports on the server. The component needs to do about 260 iterations at the interval of 20 secs, in each interval it generates 10 reports. It does about