My iPhone 5 went black. I tried pushing the on/off button and the circle button at the same time.  It worked once and then it happened again and I can't get it to work.

Iphone 5 went black.  Tried pushing on/off and circle at the same time.  Worked yesterday and then did it again today.  Can't get it to work.

You need to hold those button longer until you see the apple logo, then release, then wait for the phone to boot back up.

Similar Messages

  • WVC11B can't get it to work

    I have an WVC11B camera and it used to work fine.  I stored it for a while and tried to use it again; however, I can not get it to work again.
    This lights turn on (never blink) when connected and I've tried several times to reset the device to no avail.  I can not even see the device on my DHCP list??
    Any ideas?  Is there a shop that may repair this unit?
    Thx,
    RG

    Where is your Camera connected ? What is the modem number of your router ? What is the default IP Address of your router ?

  • HT201263 Okay so i was updating someone picture in my contacts it kept loading for a long time so i held the home button and the power button it slowly went black like it faded out and went black i tried everything i dont even know what wrong pleaase help

    Okay so i was updating someone picture in my contacts it kept loading for a long time so i held the home button and the power button it slowly went black like it faded out and went black i tried everything i dont even know what wrong i been had a crack on my phone and like i can see thats its light so like what do i do cause i tried plugging it into the computer and stuff and the computer dosent even bring up the logo which means the computer dosent reconize that my iphone is plugged in i had this problem before except it went white pleaase help

    Hi supreme_babes,
    If the display on your iPhone is black or isn't responding, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • HT2978 my iphone went black and it will not come back even after i held the two bottons for over a min

    my iphone went black and it will not come back on even after i held the botons down for a min

    Hey dodie67,
    Thanks for the question. Sounds like your iPhone stopped responding to buttons, switches, or touchscreen input, so you'd want to go through the troubleshooting steps in the following article and see if that resolves the issue:
    iPhone, iPad or iPod touch: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Take care,
    David

  • My iPhone went black and the hold the power and home button solution will not work

    My iPhone went black and the hold the power and home button solution will not work

    Make sure it's charged.
    Try to Reset your device:
        Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

  • My iphone went black and will not turn on past the apple logo

    iphone went black and wont turn on past apple logo

    Did you try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again?
    If this does not work, connect in recovery mode and restore, explained here:
    If you can't update or restore your iOS device

  • IPhone went black? What happened?

    My iPhone 4 suddenly went black after trying to upload a video to facebook. It is unresponsive to anything including the charger and resetting. I didnt drop it and now I just dont know what to do. Help??

    Try holding down the on/off and home buttons at the same time until you see the Apple logo. 

  • Iphone 4 black screen, tried dfu mode, itunes not picking up device. not able to bring up red phone off slide bar or apple logo if any combination of button holding. HELP

    iphone 4 black screen, tried dfu mode itunes not picking up device. not able to bring up red phone off slide bar or apple logo if any combination of button holding.
    Phone was given to me by apple 2 weeks ago. Last I saw of it working was phone was off so i did the quick reset. Apple logo came up, it started up and keypad for passcode came up. It said 2% battery then went up to 64% a second later. When I was playing wth it not 5mins before it was at 65% so would make sence that later indication was correct. Before I could type the 4 digit passcode in the phone turned off to black screen. Now I have tried all possible reset options incuding the 10 second hold down of both buttons for less than 10 seconds and longer than 10 seconds. Nothing is working. iTunes is not recognising the device at all. Ive had it plugged into a wall socket for three hours and the computer for 2 hours and no signal of life. Ive tried the forums on here and the youtube vidoes and seem to know what im doing with resets. Anyone able to shed some light?

    Not being able to get DFU Mode indicates hardware failure. Since you recently received this iPhone from Apple it has at a minimum 90 day Warranty. Make Genius reservation or make service arrangements and take or send to Apple for resolution. Regarding what is actually wrong with the iPhone, it could be possibility of several things. But some of the features point directly to battery. First step in fixing this iPhone would be battery replacement. Then trouble-shooting from there if still problem. Take it to Apple.

  • HT4993 iphone went black wont turn back on

    iphone went black wont turn on even plugged into charger

    Reset it by pressing and holding the home and power buttons until the white Apple logo appears.
    No data will be affected.

  • HT1695 My iPad shows it is connected to the Internet wherever there is free wifi but it is getting up and I can't get it to work? I tried rebooting but it didn't help. Any suggestions?

    My iPad shows it is connected to the Internet wherever there is free wifi but it is getting up and I can't get it to work? I tried rebooting but it didn't help. Any suggestions?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I turned my safari off and iphone went black how do i fix this

    i turned my safari off and iphone went black how do i fix this

    Hi there sbrianbald,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W. 

  • Have an airplay enabled AV Receiver - how do i set up Airplay    I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the

    have an airplay enabled AV Receiver - how do i set up Airplay
    I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
    Do I need Apple TV or to change some settings somewhere?
    Any help would be greatly appreciated

    You are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
    About AirPlay Mirroring in OS X Mountain Lion:
    http://support.apple.com/kb/HT5404
    iOS: Recommended settings for Wi-Fi routers and access points:
    http://support.apple.com/kb/HT4199
    Troubleshooting AirPlay and AirPlay Mirroring:
    http://support.apple.com/kb/TS4215
    Good luck in setting up 802.11 wirelesss network.

  • My ipad and iPhone have different email addresses in the FaceTime field but I can only get FaceTime to work on my iPhone, how can I get them both working on facebook

    My ipad has a different email address than my iPhone, both are mine but I can only get FaceTime to work on my iPhone but seem unable to change the email address in that field

    If the basics (restart, reset, restore from backup, restore as new) don't work, you'll need to bring the phone to Apple for evaluation

  • I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI  inputs in the back.

    I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
    The receiver has two HDMI  inputs in the back.  However they say they are not for PC's.  Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables.  I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV.  But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
    My Email is [email protected] 
    Do you have any suggestions
    Thanks
    Bob

    I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
    Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
    Bob

  • HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

Maybe you are looking for

  • Which OAM setting for passing values in HTTP header to application

    Experts, what is the setting in OAM 11gR2 that is set to pass a userid pulled from a LDAP directory (which is already configured with OAM) as a HTTP Header to an application. This is typically in cases where OAM is protecting or providing to protecte

  • Pb XML with export report group

    Hello,I am trying to export a group of reports under ( Analyzer 6.1.1 DB2 W2K ) to import it onto another server ( Analyzer 6.2 oracle 9.2 W2K ).The export and import work fine and the documents can be found in Analyzer 6.2 - however, when I try to e

  • Computer doesn't detect iPhone

    I have a 1st gen iPhone and when I plug it into my computer, it doesn't detect it. I know the USB works because the phone is charging. What can I do to get my computer to recognize the device? I am using a desktop Mac with OS 10.5.7 and iTunes is v 8

  • Preview on iMac 5K

    I have a fully loaded iMac with 5K display.  When using Preview to look at PDFs of spec sheets, drawings, etc. it is unbelievably slow.  I get the pinwheel for 20-30 seconds at a time when zooming or panning.  The same files have no issues on a MacBo

  • Enable "Automatically Install Updates" on Custom Reader XI Install

    Hi, How would one go about enabling "Automatically Install Updates" in Preferences to be the default value for "Check for Updates" in a custom installation for Adobe Reader XI?  I've used the customization wizard, but the only setting built in that I