My iPhone 5 will not turn on (please help)

My iPhone 5 will not turn on. I turned it off in the morning and when i went to turn it back on in the afternoon if wouldn't turn on. I plugged it in and it began flashing the startup screen with the apple logo on it. I tried to restore it but it couldn't, can not get into apple shop until tuesday! please help

i have found my own fix plug the phone into laptop with iTunes open, Hold home and top power button, until the logo vanishes, then let go of the power button keeping hold of the home button at the bottom, it will then ask to connect to iTunes, as u have it open an attached to the computer u can click the pop up an restore the phone!!
hope it helps

Similar Messages

  • My iPhone 4 will NOT turn on. Help?

    I've had my iPhone 4 for about a year, Dropped it a month ago slight crack all okay since then, Now it doesnt matter weither i do all that holding buttons down for 30 seconds or any of that, it will not turn on! It will charge and the Apple symbol will glow and you can see it is not a charge problem. I dont want to buy a new one, or send it away AGAIN to be fixed, anything i can do?

    Open iTunes on your computer and try connecting your phone.  See if iTunes reports that your phone is in recovery mode.  If so you will have to restore it.

  • BlackBerry Torch 9800 Will NOT turn on PLEASE HELP

    My phone went black today and will not turn back on.. I have taken out the battery and the sim card, when i put them back in the red light at the top just flashes and nothing comes on the screen. I have tried to boot it by charging it and hooking it up to the computer. The BlackBerry desktop manager says it can not connect to the phone. PLEASE HELP

    Parsifal wrote:
    I have had the same problem 3 times over the past 2 years.  The first time, Telus replaced the phone immediately as I was told it was a factory defect.  The second time happened within the warranty period and TELUS decided to send it to BlackBerry to get it repaired.  Phone came back,4 weeks later and worked properly but within a month same issue, does not boot up. Third time and three weeks later a new Torch came back from BlackBerry w on what was wrong with that phone.  Now I am staring at the same problem on the THIRD TORCH I HAVE HAD IN TWO YEARS!!! What kind of defective product is BlackBerry shoving down our throats.  As consumers we should expect what we purchase to work and not have to waste 4 hours reloading this and uploading that. Frankly I don't want to find the time to upload a bootfile that is missing, WHY IS IT MISSINg? Why is there a problem in the first place with the phone.  If there is a defect, own up to it and recall them.  I have had BlackBerries for the last 10years, this one is going into Lake Ontario and I am buying a an ANDROID.  Its funny how even the sales people at the corporate TELUS Store and the tech support atff on the phones told me to just chuck it and never buy another BlackBerry again because they are also sick and tired of letting their customers down.  
    Is this a 9800 you're talking about? Reading your post, this is actually the 4th time that you've had this happen, with 3 different phones, correct?
    When you talk about "reloading this and uploading that", are you talking about reloading the OS, or applications? I'm wondering if there's a particular application you're loading that's causing it.
    While I'm sure there are faulty 9800s out there, and I've had a few myself (among 80 users), I find it hard to believe that you could end up with three faulty ones in a row. Are you able to get the battery charged somewhere, just to be sure it's not just a dead flat battery? It might be that you've got an application that's flattening your battery to the point where the phone can't start, even on the charger.

  • Ibook will not turn on, please help. ASAP

    I have an i book laptop but i am not sure what model it is. I just know that it is about 4 to 5 years old. I used to have some one that could fix it for me and tell me what is wrong. But i do not have them any more. My computer will not turn on. Even when i plug the power block into it. I have looked at the mac support things. but none of them have helped me. if some one out there could help me i would be sooooooo great full. Please some one try to help me solve this problem. i have tried the (PMU) restet, when you press shift, ctrl, option simultaneously. Then you are supposed to wait 5 seconds then turn it on. that did not work. For many months now i have been struggling with this problem. i really need some help, because the mac support on this website has not been helping me. So maybe by creating this account, and writing this letter. Some one will come to help me.
    By the way i cant even find out what OS it is because i cant turn it on to find its information

    Thanks - but I can't see anything, the screen is dead (which is why I put the disk in - I was following the troubleshooting instructions), all I hear is the fan, but there's no screen prompt. I've tried resetting the PMU and the PRAM without success -- I've been having this problem on and off for a few weeks but it usually started ok the second or third time. Now, however, it's not working at all.
    Hi,
    You may be able to eject the CD by starting in open
    firmware.
    Hold down the command-option-o-f keys as you start.
    When you see some text on the screen release them. At
    the prompt type "eject cd" (without the quotes) and
    press return. It should eject after a few seconds.
    Next try resetting the NVRAM. At the prompt type:
    reset-nvram <return>
    set-defaults <return>
    reset-all <return>
    It should restart after the third command is
    entered.
    John
    ibook G4   Mac OS X (10.4.8)  

  • My ipod will not turn off please help???

    Everything works on my ipod, but it will not turn off. It will play and pause but not turn off.

    I too have had this problem. In fact it seems to be a fairly common problem, suggesting that it is an unaddressed bug.
    Here's what you can try:
    1. Reset your iPod by holding down the Menu and Select buttons simultaneously for 5-10 seconds. After your iPod reboots, see if it will turn off. If not:
    2. Restore your iPod using iPod Updater, which you can download from http://www.apple.com/ipod/download/ . Restoring your iPod will delete all songs, pictures etc and reload the iPod's operating system. If that doesn't fix it, you can:
    3. Try a work-around. Can you turn it off using the Sleep menu option? If you don't see that in the main iPod menu, go to Settings/Main Menu and turn on the Sleep menu option. This didn't work for me, but others have een able to turn their Nanos off this way.
    If none of these things work, your only option is to have Apple replace you iPod. You can do this by contacting Apple support, or by going to the Genius Bar at an Apple retail store.
    Several people (including me) have seen the not-turning-off problem in conjunction with the Nano frequently showing a message saying that firewire connections are not supported. In my case my Nano became unusable because the firewire message would pop up so often that I couldn't navigate through the menus to get it to play anything. I took my Nano to an Apple store and the Genius Bar guy replaced it on the spot. Unfortunately the replacement also doesn't work (headphone jack doesn't work so I can't hear any music) so I will have to go back again, but don't let my run of bad luck prevent you from getting a replacement.

  • 3 beeps after ram upgrade, computer will not turn on, please help!  I have tried everything.

    I have a late 2011 Macbook Pro 15 inches, i recently upgraded the RAM from Crucial 8gb (4gbx2) to Crucial 16gb (8gbx2).  I have done thies before, was er careful, and had antistatic clip, clean work surface, etc. When trying to turn the computer on again, i hear 3 slow beeps, repeated three different times, and the computer does not turn on.  I have been looking around for solutions.
      I have already swapped the memory modules, cleaned them, dusted the whole computer with air can, put the old ram in and still have the 3 beep problem.  It no longer works even with the old ram.  The computer was working perfectly fine before this.
      Am i missin a step?  I saw in a video on youtube that i have to reset the RAM with Alt+P+R+Power button, but nothing happens.
      Please help, i am self employed and my Mac Book Pro is the computer i work with!
      I have Lion operating system, everything updated very recently.  Stock 512 gb hard drive.

    Thanks for the quick reply Allan, i have reseated the ram 4 times, swapping top and bottom Ram modules, and pushing them in firmly and pressing down evenly with both hands. 
    I tried to put the old ram in as well in case the New RAM was bad, and that did not work anymore either.  I am from Mexico and live in Mexico City, and it is not easy to send the RAM back and get an exchange.  I will go to a MAC repair center on monday, but think i am missing some simple step somewhere. As i said this is my work computer and i really need it!
      I have reread what i wrote before, to clarify my computer was working fine with the old 8 gigs of ram, i just wanted it to be faster, and bought 16 gb since they are now much cheaper than a few years ago.

  • Help me!!!!! my iphone 4 will not turn back on HELP

    i was watching a movie in my living room and the last time i looked at my phone it was at 40% and the next thing i know that it is turned off and will not show any sign of turning back on

    Charge it for 30 minutes with the wall adapter. Then hold the HOME and SLEEP buttons at the same time until an Apple logo appears. If nothing happens your phone has expired, or at least has a bad battery.

  • IPod Touch Will Not Turn On - Please Help!!!

    Hi...I have a 1st generation touch. I used it last week and it had a low charge. When I tried to charge it this morning nothing happened. The computer or iTunes would not recognize the touch. I remembered updating iTunes the other day...so I did an uninstall and then reinstalled...wondering if that was the issue. That did nothing. I've tried to go into recovery/DFU mode...and nothing...no response at all. Unfortunately my touch is out of the two year warranty. The touch has never been jailbroken. Does anyone have any suggestions on how I can save my touch?
    Please...any help would be appreciated.
    Thanks.

    having the following problem...
    my ipod touch was hot at the bottom rear when i picked it up. for no reason. the display worked ok but didnt let me slide to unlock or slide to switch off. i have since fully charged it, fully discharged it several times and the screen remains black no matter which buttons i press. i have tried the reset by pressing top and bottom button for 10 seconds still nothing happening. It is now not recognised by the computer when i switch it on. or the tone from the computer when the usb is connected. iv not dropped or damaged the ipod in any way. tried chaarging via ac plug for iphone and via laptop.
    just there tonight i tried charging via a different usb port on the laptop and that has brought it back to life. started charging again etc but the screen has what looks like a watermark across the right hand side making the touchscreen function at that side difficult to use. hopefully this will help.

  • My ipod will not turn on, please help.

    My problem is different than the other ones posted on the forums, I have a 60gig ipod. Once it turns off I can't get it to turn back on unless I reset the system by pressing the menu and center button. Is there a way without restoring the original settings? It works fine once its on, but it is really frustrating to have to reset the ipod every time I want to use it. And I don't want to create more problems by constantly restarting it, that can't be too good for the ipod. It still syncs fine with the computer and everything. And it has a charge. If I reset the ipod, it will play fine. It's just after I use it, I turn it off, and next time I want to play it, I would have to reset it.

    Hi Patrick,
    You sound like you know something about a thing or two...Would you know anything about myself and other people 's problems about
    the Apple logo flashing on and off with a low whining down sound and then restarting again,and this goes on and on,I guess untill the battery dies.
    I have a 5th Generation 80GB Classic ipod.
    I went to turn on the ipod and nothing happened. I tried the reset method by sliding the hold switch ON, then OFF, and pressed both the top area of the MENU button and the middle of the SELECT button, at the same time, but with two different fingers.
    All I’m getting now is the black screen with the Apple logo appearing for about six seconds, then off for about 6-8 seconds, and ON, over and over again and so far it has been doing this for about fifteen minutes now.
    I called APPLE, and they told me to install iTunes, and plug in the ipod, and hit the RESTORE Option, but for some reason, the newly downloaded QUICKTIME and new itunes I just downloaded from Apple does not open up the itunes when I double –click on it either from the desktop, or the Start>Programs>itunes folder.
    The reason for all this was that I was clearing off one computer’s hard drive to another new computer before I wipe the Hard drive. I deleted all my mp3’s and the itunes program from the old computer and put the mp3 music files onto the new hard drive. I downloaded the new Quick time and itunes programs separately to my desktop.
    I was told from Apple that my ipod warranty has expired by about 85 days.
    I have run all the Apple updates and it tells me I am up to date. Thanks for any help.

  • IPhone 4 will not ring.  Please help

    My iPhone was working fine.  It stopped ringing when a call comes in.    I also do not hear the rings when a test or message comes in.  I can hear the ringtones from the speaker.  The alarm clock works.  The darn thing just won't ring.  The first time it happened, I powered it off and it worked fine for a few hours.  Now, it want ring.  Someone please tell me what to do.  Do I need to reset the phone?  It's backed up to my computer and iCloud.
    Settings under Sounds:
    Vibrate - Off
    Ringer and Alerts - High
    Change with Buttons - On
    Vibrate - Off
    Ringtone - I've tried each one

    Never mind.  I got it to work.  Thanks, C

  • I don't have a phone plan, so I cannot text without wifi. I have been using iMessage to text my friends, until it stopped working. I can text my sisters email, but not my boyfriends iPhone. The send button will not turn blue. Help? Please?

    I don't have a phone plan, so I cannot text without wifi. I have been using iMessage to text my friends, until it stopped working. I can text my sisters email, but not my boyfriends iPhone. The send button will not turn blue. Help? Please?

    There is a problem with iMessage with what Apple says is a small number of iPhones and they are working on a fix. In the meantime try this:
    1. Settings > Messages > iMessage = Off
    2. Settings > FaceTime > FaceTime = Off
    3. Settings > General > Reset > Reset Network Settings
    4. Wait for the iPhone to Reboot
    5. Settings > FaceTime > FaceTime = On
    6. Settings > Messages > iMessage = On
    You may have to repeat the steps a couple of times.
      - with thanks to @deggie

  • My iPhone 4 will not turn on and is just displaying the itunes symbol not the apple symbol. How do I fix it?

    My iPhone 4 will not turn on and is just displaying the itunes symbol not the apple symbol. How do I fix it? My phone died and I went to plug it in and it just displayed the itunes logo. It will not turn on at all. I plugged it into my computer in an attempt to connect to itunes with hoped of it turning on, yet nothing popped up as if it wasn't registering. Please help!

    http://support.apple.com/kb/HT1808

  • My iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears someone help!!!

    my iphone 4 will not turn on but when connected to the pc in itunes it says my device is in recovery mode and when i do SHIFT restore and select my ipsw it extracts then this 3914 error message appears. i normal restore then it this error message appears 1601. and my iphone is in RECOVERY mode. and holding the power button and the home button doesnt do anything my latops just makes a ding sound after 6seconds. My iphone screen is just blank and will not come on and i really need help

    Has the iPod been wetted?
    Try DFU mode and then restore
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    Try on another computer.
    Also see:
    https://discussions.apple.com/message/12690674#12690674
    https://discussions.apple.com/message/13032101#13032101
    Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • My iPhone 4 will not turn on. When I plug it into Itunes it says it is n recovery mode. I try to restore it and the error code code 3194. I have tried all the steps what now?

    My iPhone 4 will not turn on. When I plug it into Itunes it says it is n recovery mode. I try to restore it and the error code code 3194. I have tried all the steps what now?

    It is usually given as a communication error between Apple, iTunes (your computer), iPhone. Somewhere they are not communicating, so the iOS you are trying to install cannot be approved by Apple. Trouble shooting steps include, making sure you have Current iTunes installed, make sure your Hosts file of computer is not blocking Apple. Try restoring on another computer.

  • HT201210 iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting t

    iPhone 4s will not turn on, a screen shows up telling me to connect to iTunes to restore and update to iOs7, but when I try to restore error 2001 comes up and will not let me restore. I still cannot turn my phone on. None of the troubleshooting tips work, help??

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process.
    FollowTroubleshooting security software issues to resolve this issue.
    In rare cases, these errors may be a hardware issue.
    If the errors persist on another computer, the device may need service.

Maybe you are looking for

  • How to handle multiple / dual MRP in RMS , RPM ?

    hi all , can some one share how to handle dual MRPs in RPM & RMS. regards, deepak

  • Bluetooth disappeared from System Preferences

    When I fired up my PowerBook G4 this morning my Bluetooth is no longer available. When I go to System Preferences the Bluetooth preference is not there. I've rebooted to no avail. I've also noticed funny things with the Bluetooth icon in the menu bar

  • Downloading iTunes stalls

    Hello, Itunes  starts downloading on my HP pavilion, 64 Bit/Windows 7 but time and again stalls halfway. I have removed the older version of iTunes, cleared temp file, used different browsers etc. Nothing seems to help. Who can help me? Thanks !

  • Problem canceling an incoming Payment

    Hello Everybody I'm trying to cancel an Incoming Payment using DI API. When i do oDocIP.GetByKey(iDocIPnumber) I have the document (checked that by saving it as an XML File) But wen i call the cancel method i have a -2028 Error "No Entry Found" The i

  • Execution of plsql subprogram

    what happens when size of sharedpool is small for the execution of a plsql subprogram?