My iPhone 5c dies during the night

I charge my phone every night before I go to sleep and when I wake up its in the verge of dying. It's ways at 3,5, or ten percent! What's going on i dont know what to do!!!

Simple solutions:
Leave device on the charger overnight.
Turn it off before going to bed.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Similar Messages

I have recently got a new replacement iPhone 4. since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table. How an I find out what is causing this and stop it happening

I have recently got a new replacement iPhone 4. Since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table. How an I find out what is causing this and stop it happening? Some nights the usage is 150 meg!

You can not access the backup directly.
Did you restore your replacement from this backup?
If so then you already have everything in the backup on your device.
If not, you can wipe the device and restore from this backup:
Settings > General > Reset > Erase All Content & Settings
What is it you are worried about losing that isn't already on your current device?

My iPhone 4S went dead during the night.

During the night my iPhone 4S went dead and the screen was black. The bottons wouldn't answer on anything, so I readed on the net that I should hold down both bottons and make a restart. This worked and the iPhone started up with 60% battery level. Why???

i got my new ipone 4s yesterday afternoon, played a little bit. then in the evening went to completely dead after i put in to my pockeckt for 10 mins. no reaction even with power plugged in. I was able to recharge it this morning (plugged in and see the charging icon).
this afternoon (the 2nd day) I sent a message and left it on the table for a few mins, did not get the msg back then relized it went dead again. my friend did a reset for me and saw the battery has 65% left..

Hey (: I have the new iPad and I want to ask what is "healthier" for the battery : turn the device off in the night or keep it on during the night ? Thank you !

Hey (: I have the new iPad and I want to ask what is "healthier" for the battery : turn the device off in the night or keep it on during the night ? Thank you !

BTW, statements like
"Use the device until the battery has drained to the point of self-shutdown. Basically, use it until it turns itself off."
in articles like the one at http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/ are complete BS and if you do follow their "advice", your battery life will be severely hampered. Particularly if you also follow one of the comments: "Step One.One: Leave the device for 5+ hours before start charging. This will fully drain the battery." Well, the guy that advised the latter certanly doesn't know anyhting about lithium batteries and the damage deep discharging does to them.
Again, what the article (and the above-cited comment) advices is complete b*llsh*t and noone should really do this.

IPad turns on itself and turns on WiFi after both shut down especially during the night

This happens to all my Apple devices, 3 months new MacBookPro, iPad mini, and iPhone. I shut things down when I am not using it, and I turn my phone off too. But, in the past couple of months, there are many times when I go to use my devices, especially the MacBookPro and iPad, they are turned on who knows when and how, remotely by someone or backdoor, and hooked on this website via WiFi: mzstatic.com.
Does Apple secretly collect user data? Is there back door preplanted into the system?
How can the devices turn them selves on after being completely shut down? and turns the WiFi on (I turn the WiFi off from the settings panel, not just the top tool bar), and hook themselves to this specific site? My security software shows this site belongs to Apple.
Please explain how this could happen again and again, no matter how completely you shut them down? Why it only happens when I am not using it,especially during the nights when I am sleeping?
<Edited By Host>

Is your battery dead or alive?
If the battery is dead, we must find out if it is:
1. Charger problem
2. Cable problem
3. Docking port problem
4. Wall socket problem

TS3694 Please how do I handle this. I downloaded a higher version of my Iphone 3 but during the installation it always hangs and show an error message that it cannot be downloaded with code1015.

Please how do I handle this?
I downloaded a higher version of my Iphone 3 but during the installation it always hangs and show an unknown error message that it cannot be downloaded and the code of the message 1015.

This is usually a result of the iPhone being hacked with the cutsie term for that "jailbroken".
http://support.apple.com/kb/TS3694#error1015
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Process orders in the weekend moving during the night in APO/PPT1

Hello Gurus,
I have a problem on the scheduling of production orders when these orders are scheduled
on the week end.
Problem description:
On day 1 the short term planner schedules production orders in PPT1 (APO) on the
week end.
During the night these production orders are re-exploded in ECC (see: COR2 => Read
Master Data)
On day 2 the end production date of orders that were in the week end, have moved
by the system to the Sunday night.
Step 1: The order is scheduled on the week end on Saturday 14 March 2015.
Step 2: We explode the order in ECC
In ECC, we have:
But if we check the order in APO, we have:
You can see that the process order are placed at the night of sunday, also if in ECC after explosion was always where was planned.
Have you any idea how to avoid that the process order moving in APO ?
Thanks Gurus.
Livio

Hi
You may have 2 settlement rules for CO Products... So ensure you enter PA Trf Str at all the places... This error is never thrown by SAP w/o valid reason
br, Ajay M

Do not execute job during the night

Hallo everybody!
I have a background job that runs every 10 minutes.
I don't want it to run during the night. Is it possible?
Thank you very much indeed.
Mick

This may be helpful to you: 'At Operation mode' while giving start condition. Sap documentation says:
Operation Mode
Procedure
You can enter any name for the operation mode, but ensure that it is meaningful and that it makes the task of the operation mode clear.
Examples
Normal operation
Night operation
You may have to configure this operation mode in SPRO according to your requirement.
Thanks,
Priyanka

Can you block syncing of email during the night?

Is there a setting that block syncing during the night? Some time setting that you can put in a beginning and ending time to sync every day?

Sure this works, but it isn't exactly practical. To have push e-mail daytime but not at night you'd have to remember to activate/deactivate the feature twice a day.
Wouldn't it be nice if you had a settings pane where you could specify at which times you want push and not?

Error events 31551 and31552 only during the night

events error 31551 and 31552 started show up for some time every night 00:00 to 08:00 “SQL exception timeout expired... timeout period elapsed prior to completion... “
Also 16 events warning 2115 showed up in between the 31551-315522.
At all time we have many warnings 29202,
If not closely monitored our rms health service stops working ... "Staled" state
No backup runs on SQL db. DBs are backed up by sql on another lun that is backed up by Tivoli tsm.
No antivirus on Db.
The SCOM db have been moved 3 weeks ago on from SQL 2k5 to SQL 2008 r2 sp1.
My SQL admin found out that the SQL is generating lots of i/o (not all on disk, some in memory...) over 1 Tb of data every night for some time... During the day DW db size is 74062,56 MB
We moved SQL data and log folders on different luns, DW on its own lun. We moved the Datawarehouse on another lun, it made no difference.
The datawarehouse lun has long latency during the night, up to 15 sec.
No new MP installed in the past 8 months, only few overrides and disables recently
Our scom setup is 2007r2 cu7, rms on 2k3sp2, ms (acs) 2k3sp2 and ms 2k8sp2, 1 gateway in a dmz on 2k8 sp1 . Setup dated 2008 and 2011, all virtual Esx and approx. 150 agents.
From what we have read it seems to be related to performance, however we are unable to find root cause of issue.
Can you please help us determine what causes these error events to show up at night only...
Summary of error events follows:
Event Source: Health Service Modules
Event Category: Data Warehouse
Event ID: 31551
Date:  04/06/2014
Time:  08:00:31
User:  N/A
Computer: MMTRLPALPINF033
Description:
Failed to store data in the Data Warehouse. The operation will be retried. Exception 'SqlException': Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.Synchronization.Relationship
Instance name: MMTRLPALPINF033.Prod.MJQ.Local
Instance ID: {0F390614-0505-F7C2-49A3-128862BF520E
Workflow name can also be "Microsoft.SystemCenter.DataWarehouse.Synchronization.ManagedEntity "
One 31551 with following description
Failed to store data in the Data Warehouse.
The operation will be retried. Exception 'SqlException':
A transport-level error has occurred when receiving results from the server.
(provider: TCP Provider, error: 0 - The semaphore timeout period has expired.)
Event 31552
vent Type: Error
Event Source: Health Service Modules
Event Category: Data Warehouse
Event ID: 31552
Date:  04/06/2014
Time:  07:08:45
User:  N/A
Computer: MMTRLPALPINF033
Description:
Failed to store data in the Data Warehouse. Exception 'SqlException': Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.DataWarehouse.StandardDataSetMaintenance
Instance name: Performance data set
Instance ID: {3EC423BE-5714-81B5-AA64-29A3E158A7B6}
Management group: OPSMGR_P
Event Type: Error
Event Source: Health Service Modules
Event Category: Data Warehouse
Management group: OPSMG
The 31552 was mostly with Instance name: Performance data set
Some with Instance name: event data set or state data set and some with the RMS server.

Hi,
You have moved the database to a new SQL server. What is the collation on the new server? Only SQL_Latin1_General_CP1_CI_AS is supported. Please check free space in the SCOM DB's and transaction log DB.
Same issue here, please refer to this one:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/9be98791-1f41-4563-990f-0e5d622e7955/scom-2007-r2-failed-to-store-data-in-the-data-warehouse-exception-sqlexception-timeout?forum=operationsmanagergeneral
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

HT1386 my sync stops due to iphone not found during the final copy step...how do I fix?

my sync stops with an error message that iphone not founds during the final copy step...how to I fix? always work before.

The backup is located at: iTunes/Preferences/Devices. Select the backup from the window and hit the delete key. Then connect your iPhone to your computer. It'll take a new backup.

Is it better to leave your macbook pro in sleep mode during the night or have it shutdown all night?

Is it better to leave your macbook pro in sleep mode during the night or have it shutdown all night?

During sleep, your MacBook consumes a little part of the battery, so it won't harm leaving it in sleep mode. Also, you will be able to start using it quickly, as you don't need to wait until Mac OS X turns on.
I only recommend you to turn off the MacBook if you are not going to use it for days in order to save battery, but apart from that, you don't need to turn it off

Keeping Stock Headphones in your ears during the night

Hi... it's been a while since I've posted, or even logged in for that matter. But anyways, I've got a question. If anyone knows what a Lucid Dream is, I had my second one in 2 weeks last night. (It's a dream in which you are aware that you are dreaming). Just read dreamviews.com. Anyway, I wanted to try this lucid remix song. It's on my iPod. But my problem is getting the earbuds to stay in my ears during the course of the night. I sleep on my back when using the earbuds, because they are painful when sleeping on your side.
Also, I'm using the stock headphones.
Thanks.

Well I only listen at about 15% volume during the night. And the lucid dream remix song is not constant noise. It's more slowly building tension, keeping that tension, releasing the tention, and occasionally saying frases such as "You will remember to check your reality and identify that you are in a dream state."
How do I tape them? Do I tape them to my head or do I tape them together.

My Mac turns itself on during the night?!

I've noticed that my MBP seems to turn itself on during the night - I think around 1am. I've looked in the Energy Saver Schedule and there's nothing set up for it to come on.
I'm a little confused as to what may be causing this. Any ideas would be much appreciated.

Do you have eyeTV on your Mac? This is what I've found to be the cause of my Mac turning itself on at 1am every morning.
If so, does your Mac turn itself on at a set time every day? If so, check what time that is in the Console. You'll need this so you can manually set your clock in order to test it all out.
I then decided to delete all preferences with elgato in the name in both my Mac prefs and User prefs (make sure you have your eyeTV serial number as you'll need to enter this when you next start up eyeTV.
Okay, then start up eyeTV and go through the whole process - just make sure you uncheck things that will be automatic i.e. channel listings etc.
Then quit eyeTV and set your computer clock to just around 40 seconds before it turns your Mac on and then put it to sleep - if it doesn't wake up then great - if it does then you'll need to delete the elgato prefs from just your User prefs and start up eyeTv again - go into the prefs of the program and uncheck anything that appears automatic i.e. automatically check for updates etc
Hopefully this'll work as it's worked for me - a bit of a pain but a least I no longer get woken up with the famous Mac BOOOONNNGGGG

Lumia 920 freezes/crashes during the night. Can't ...

I have had my Lumia for 10 days and for the second time it crashes during the night and the next morning I was not able to turn it on using the power button. I had to do a soft reset... The alarm that I set to wake me up never started... This means that I cannot trust my phone for waking me up in the morning! This is unacceptable!

There is a possible alternative to the flashing or reset suggestet by the care point.
As the problem only started recently, there is a high probability that it is caused by a bad app or setting or the combination of the two. The alternative is to reverse whatever apps you installed or settings you changed just before this problem started.
The flashing is just an easy way out because it reverts the phone back to its out of the box condition. However, you may find yourself in the same situation again should you install the same app or make the same setting changes after the flashing.
I had a similar problem with one app but I managed to isolate it and the problem disappeared after I uninstalled the app. The app was pulled subsequently and updated by the developer and is now working fine on my phone.

My iPhone 5c dies during the night

Similar Messages

Maybe you are looking for