My iphone 5s (7.1) has permanently the search icon, as if searching network. This affects the speed of email and consumes a lot of battery. This happens even with all applications closed. I have restored the iPhone but the problem persists. Do you have an

My iphone 5s (7.1) has permanently the search icon, as if searching network. This affects the speed of email and consumes a lot of battery. This happens even with all applications closed. I have restored the iPhone but the problem persists. Does anyone  have an idea of the solution?
Thanks!!

Try to reboot the iPhone, if that doesn't help make a backup via iTunes, and restore the iPhone via iTunes.
Otherwise disable background refresh, and kill all apps

Similar Messages

  • Spinning Beach Ball of Death.  Even with all programs closed, I'm still using 5 GB of RAM, according to Activity Monitor.  Help!

    Ever since installation of OSX Lion, I've been having freeze-up problems on my early 2011 MacBook Pro.  Increased the RAM from 4GB to 8GB.  Amazingly, when I have Mail and Chrome open, almost all of the RAM is consumed.  Even with all programs closed, I only have about 3 GB of free space.  Any ideas as to what the problem is?

    Mail under Lion (your profile says 10.5) is always busy and doesn't like large email database I hear.
    Chrome and Safari don't clear their history and cache, lack quota on how many days and disk use, so clear those out. This is where I do use CCleaner on Mac as well as Wndows.
    I keep reading from 10.6 on that even closing (quit) does not release memory and threads galour that there are memory leaks that you have to repair permissions, even restart, and poor memory management for many people's systems (often laptops).
    Free RAM is wasted RAM though. Even 3GB seems excessive. This is not OS 9 or 1999.
    but I found that 4-core 4GB RAM was fine except for handling large photo libraries.

  • 4S usage % drops quickly even with all apps closed. What is normal?

    4S IPhone. Usage % drops quickly even with all apps closed. What is normal?

    It depends on your carrier and signal strength, usage patterns, wifi connectivity, apps used every day.
    Low signal on CDMA networks will drain the battery within 5 hours.
    Full signal on CDMA + LTE will allow up to ~17 hours of runtime
    Who is your carrier? (and signal strength)
    What is your usage pattern?
    When do you notice the battery dropping?

  • Grainy photos in PrE 11 slideshow when burning to DVD. I have read numerous topics but still problem persists. Please help.

    Well, the title pretty much says it all. I have an issue concerning grainy pictures.
    First, let me give a brief introduction on what kind of project we are dealing with here. As I have been reading these forums for hours for the past days I already have a good understanding of what is of importance, so further details below.
    Introduction:
    Video editing started to become a real hobby. I learned to edit using Pinnacle studio, but the numerous bugs and flows forced me to try something else. Adobe to me is 'the real deal' and you only learn to use a program like PrE by just doing it! So for this project I thought I might give it a go:
    I am editing a video of my uncle's funeral. The funeral has been taped for grandchildren-yet-to-come. All (but one clip) has been filmed using the same camera. However, I do not have access to the camera and I am not the camera man. When music was played during the funeral, the camera was not rolling, so I added this music myself and put a slideshow (which was shown on the day itself) during the music.
    During the project I made several quick, medium quality renders to show my cousin (who's dad has passed away) the progress I was making. During these renders, I could not note any photo quality issues. Ofcourse also because of the low quality render settings.
    Anyway. When I finished editing I was pretty happy with the end result. My cousin approved so I decided to burn it onto a DVD so it could be further distributed to the rest of the family. Burning failed initially, but later after a reboot everything worked fine. Then I played to DVD on my TV and found out that the quality of the pictures used in the slideshows was horrible. I could not even recognise faces, it was that grainy!
    First. The 'specs':
    Camera used: Sony DCR55
    Project settings: PAL > Hard disk, flash memory camcorders > Widescreen 48kHz (I live in a PAL region: Netherlands)
    UNchecked: Force selected Project Settings on this project
    Then the photos part:
    All photos JPG
    So, onto the part of 'what I have already tried' (and failed, otherwise I would not have been typing this)
    What I have tried so far after reading dozens of discussions:
    1) Check if the DVD burner was not to blame. So I burned to a folder on my HDD. Similar result as to what I see on my TV when I burn it onto a DVD and play it.
    2) Recheck project settings. Everything seems OK to me. Also when I use right-click on the added clips to check whether settings are still OK. They are. Also for the pictures, which surprised me because the widescreen video clips use non-square pixels and the photos obviously don't. (Thumbs up for Adobe)
    3) Resize pictures to used resolution (720 x 576) before adding them. No improvement, exactly the same.
    4) Turn off 'scale to 'framesize'. No difference.
    Finally, I want to address the term 'quality'. Below you will find a scaled down image to the same resolution as mentioned before, compared to a still of the DVD:
    Upper pic is rescaled using MS paint. Still looks pretty sharp.
    Bottom is a still from the DVD file. Note the 'graining' and the horizontal lines.
    This leaves me with 2 questions:
    1) What can I do to get rid of the poor quality pictures
    2) Why do I lose horizontal pixels (as can be seen in the bottom picture)
    If anyone could help me, it would be greatly appreciated!!!!!

    Dear ATR,
    I apologize for my late response. I was on holiday
    A.T. Romano schreef:
    Question...Your camera is a miniDV camcorder....what did you capture from it and into what....
    Did you do a DV data capture firewire into Premiere Elements Capture Window to get DV.avi Widescreen (any mention of Type 1 or Type 2)
    or
    Did you do HDV data capture firewire into Premiere Elements Capture Window to get HDV (MPEG2.mpg)
    From your description of your video (720 x 576) it would seem your captures gave you DV AVI Widescreen. Is that correct?
    In your run throughs so far, has the video presented as poorly as the jpegs?
    Add On...In those last 3 screenshots, what were the resolutions
    Still resized - 1920 x 1080?
    DVD-VIDEO  screen capture of video? - 720 x 576 16:9 which would display after encoding about 1054 x 576
    MP4 - ?
    First. The camera is not a miniDV camcorder, but a harddisk recorder, which is why I chose that particular preset (PAL > Hard disk, flash memory camcorders > Widescreen 48kHz). source: http://www.sony.lv/support/en/content/cnt-specs/DCR-SR55E/list
    So it's fairly easy. Shoot video's. Connect to PC and just copy paste the video files of the camera onto the computer.
    This gives a resolution of 720x576. With a pixel aspect ratio of 1,4587 (as shown by PrE, when I click on a clip > show properties)
    The video does not really look that bad. Actually there is hardly any noticeable difference between the original un-editted videos and the edited complete version.
    Concerning the 3 screenshots.
    The first is the same as before: a rescaled image using MS Paint. Scaled from original 3264 x 1836 to 1024 x 576
    The second is a capture from the DVD file (which was burned to a folder)
    The third is a capture from a created MP4 video file
    Clearly photo 1 is the best. Photo 3 is still acceptable to me, but photo 2 (DVD) is unacceptable if you ask me.
    Hope this new info helps. Thanks for your efforts so far.

  • Macbook works very slow and consumes a lot of battery power when closed

    Hi@all
    I hope someone of you can help me. My Mac crashed yesterday. I got a warning saying "there was a problem, your Mac will reboot" (I didn't get the exact words because it vanished quite fast and the MacBook rebooted itself). Since then my Mac is working very slow and freezes every few minutes. I looked at the CPU usage but this is always under 25% so there shouldn't be a programm that causes this problem.
    In addition:
    When I close it, it seems to go to sleep mode normally but is still consuming quite high amounts of battery power and get's warm. When I work with it the temperature stays normal.
    I have a MacBook Pro (mid 2012) with 2.5 GHz Intel Core i5 running with Mavericks.
    It would be great if someone has an idea what could cause this kind of problems.
    Thanks a lot in advance for your suggestions :-)

    sternblume,
    for the high energy consumption in sleep mode, you could try resetting its System Management Controller.
    For the slow working and freezing, you can try this: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode.

  • I lost my Mac book with all my music can I restore ?

    I lost my Mac book with all my music can I restore to my new Mac book via imatch

    If you were using iTunes Match, you can recover your music with any PC or Mac with iTunes installed, and a iPhone, iPod touch or iPad. To turn on iTunes Match in these devices, see > http://support.apple.com/kb/ht4913

  • I'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error

    i'm using an iPhone 4 after upgrading to iOS 5 i'm getting an error 1635 now i'm facing problems syncing my contacts and facing many problems, i have restored my iPhone but still i'm getting the same error

    Did you check your security software settings? eliminating conflicts from third-party security software.

  • I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

    I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

    You can't "accidentally" put a passcode on any iPhone...its a multi-step process. Further, restoring an iPhone will remove the passcode, as the passcode is not included in an iPhone backup.
    Are you sure you're talking about the phone passcode & not something else...like the "Restrictions" passcode?

  • I have restored my iphone but it has been 2days saying that the activation server is not available. please help me.

    i have restored my iphone but it has been 2days saying that the activation server is not available. please help me.

    That is almost always because the phone was hacked to illegally unlock it. Contact the carrier it's locked to and ask about having it legitimately unlocked. If they will not do so, you will not be able to activate that phone.

  • Ihone 4s lost all contacts. I tried to restore from backup but the error message now says there is not enough room. I have deleted all the apps without making any more room on iphone. Why did contact disappear and how do I get them back?

    ihone 4s lost all contacts. I tried to restore from backup but the error message now says there is not enough room. I have deleted all the apps without making any more room on iphone. Why did contact disappear and how do I get them back?

    In the simplest sense, archiving a file means making a copy that you never change and never discard. You already know how to do that.
    iPhoto has built-in archival features, in the sense that it saves all versions of an image that you've modified. As long as you have adequate backups, you don't necessarily have any reason to archive an iPhoto library. If you want to delete images from the working library but still have access to them in case you change your mind, then you do need to archive those images. I don't have a specific suggestion as to how you should do that. You might post a question in the iPhoto forum.

  • HT4528 i have restored my iphone 4s but now it just keeps staying at the apple screen. what should i do?

    i have restored my iphone 4s but now it just keeps staying at the apple screen. what should i do?

    Take your phone back to the store where you got it. Tell them if they can't get it activated, you want your money back. Then purchase a new iPhone 4S.

  • I restored my iphone but now it will not power on fully.  The Itunes plugin appears.  I plug it in and restore as requested but the phone never restarts like it says it will.  I have done this several times now but nothing. Suggestions?

    I restored my iphone but now it will not power on fully.  The Itunes plugin appears.  I plug it in and restore as requested but the phone never restarts like it says it will.  I have done this several times now but nothing. Suggestions?

    Sounds like time to take it back to Apple for repair.
    Allan

  • HT201412 I have restored my iphone 5 for the second time now, and it keeps crushing after 1hour of having completely restored it through iTunes. What am I supposed to do?

    I have restored my iphone 5 for the second time today, and it keeps crushing after 1hour of having completely restored it through iTunes. What am I supposed to do? I deleted some apps I had recently installed, even changed the background refresh. What else?

    Well... it said iPhone Recovery Mode, and I pressed 'Restore iPhone' after which it asked me if I am sure that I want to restore the phone to factory settings, I pressed 'yes'. After 20-30min it eventually came to the 'Hello' page where I had to sign in with my Apple ID, and then saw the icons of each of my apps. which one by one turned from grey to their full colour as they downloaded one by one. After 1-2 hours of having completed all the app downloads, I found the phone shut and could not turn it on with the normal way. And this happened after 2 restore sessions. Is there something I need to do, or I need to request a replacement. I have had the phone for 11months, and crushing problems begun on the 13 of Nov, which was a few days after I updated to iOS7. But today is already 48hours since I have not been able to use my iPhone properly.

  • HT1414 I have restored my IPHONE and the problem still continues. No photo is save in camera roll since the new IOS6!

    I have restored my IPHONE and the problem still continues. No photo is save in camera roll since the new IOS6!

    The built in camera app. But all the apps do not allow me to save any photos as well.

  • HT4623 just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. I have held down the home button and on/off switch several times to reset, but same problem persists.

    just updated my iPhone 4s to ios6, now my phone won't turn back on. The apple logo comes on and sits then shuts off. Then comes back on and just sits.I have held down the home button and on/off switch several times to reset, but same problem persists.

    Place iPhone on Wall Charger for at least 10 minutes. Then keep on charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds of holding both buttons while on charger. If still problem, open iTunes 10.7 on computer, connect iPhone to computer with USB Cable, hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode, then click Restore button of iTunes. If still problem, try DFU Mode Restore, here are the steps. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power buttons, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time. If the iPhone screen is black, blank this is DFU Mode. Click the Restore button of iTunes. DFU Mode can be difficult to enter sometimes, just keep trying. DFU Mode is a black, blank screen with iTunes saying Recovery Mode. If still problem and there is Warranty or AppleCare make Genius reservation and take to Apple for resolution.

Maybe you are looking for