My iPhone 5s missing letters on my keyboard when I turn the phone sideways. Please help.
When texting with my new 5s, I turned my phone sideways and noticed that my keyboard was there, but most of the letters besides "D" and "M" are missing. Is there any solution to this?
please help me and give me the locaton of my iphone 5s now where i can find
Similar Messages
-
I bought my iPhone on Friday and when I tried to use it to make a call (after I had left the store) the screen had turned green - as if a green filter had been placed over it. When I turned the phone sideways the color turned to magenta. Anyone else have this problem? I plan on exchanging the phone but can't get there until later this week.
Next time you post here, you might think about using a title and the provide your description below.
-
I recently updated my IPhone 4 software to IOS 6.1 When I turned the phone back on my contacts were lost? only a few that were in favorites were still there. I was getting messages that I have to delete some backup storage (which I did) and the contacts still do not appear.ellen2140
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
Is there an on or off button for this feature, as the screen on my phone will not switch from upright to the lengthened screen when I turn the phone sideways. My phone is very new, just got it beginning of July of this year (2012). Has this happened to anyone?
ThanksIs orientation lock on?
iPhone User Guide (For iOS 6 Software) -
My new iphone 4S camera is not functioning. When I click the phone icon, the shutter appears. Then the screen only shows the shutter. When I go back to the home screen and click the phone icon again. The photo screen only shows a black screen. The button to take photos is locked the entire time. I've turned the phone on and off several times.
Basic troubleshooting steps outlined in the User Guide are restart, reset, restore from backup, restore as new. Have these ALL been tried?
-
HT4972 i have updated iphone 4.1 to 6 but i could not open the phone can you help
as per your instructions we contacted at@t to open lock for my phone. they have opend after that i upgrde my iphone but coluld not activate it. It says that "Could not activate iphone" Yopur Iphone could not be activated because the activation server is temporarily unavailable. Try connecting your iphone to itunes to activate it. or try again i n a couple of minutes, If this problem persists contact Apple Support at apple.com/support. this is the message iam getting in the phone can please help me to active , Thanking You , Regards Ganessan.
http://support.apple.com/kb/TS3281
Apple does not respond here this is a user to user forum There are no Apple staff here
Millions have updated without issue -
Unmute not working model 4S
My iphone 4S has mute activated. It will not un-mute by taping the mute button or when I turn the phone off then back on.Hi Lukeohiggins,
If you are having issues with your iPhone unexpectely powering off, you may want to try the troubleshooting listed under Power/Battery > Will not turn on, will not turn on unless connected to power, or unexpected power off in the following article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
- Brenden -
iPhone 5 was updated (version unknown), and now screen shows 'Connect to iTunes. When we try to do this, we get message 'iTunes could not contact the iPhone software update server because you are not connected to the internet'.
Please tell me how I fix this problem.
ThanksYes, the reason you are getting the error is the phone cannot provide internet for the laptop and then update itself. It would lose connection as you erase the firmware and try to update. You need to connect the computer to the Internet in some other fashion before you connect the phone to try and fix the update problem. As Ocean20 says, and I completely agree, how would you think you could use the Internet connection of a device that is not only going to turn off and on, but is going to get completely wiped of firmware and restored? It would completely remove the device from the equation here. Does that make sense to you?
-
**** there,
If you are trying to activate an iPad or iPhone and it is asking for a previous owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. You must contact the previous owner to get permission to use the device. If you cannot contact the previous owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.
-
I purchased iphone 5S in Saudi Arabia; there are iphones promoted with Face Time app, sold here widely. When I purchased it, there was no explicit ad for Face Time with it. I have Gold, 64 GB. When I extensively searched for this app, i just found it in notifications (badges, alerts). I have not been able to find the app anywhere else in the phone. Would any friend here on this forum let me know how to set an email account for Face Time? I am not sure whether it actually exists in my phone. Thank you.
Check this discussion about it, some models don't offer FaceTime:
FaceTime is not showing up in my new iPhone 5s? -
My Iphone 5(Black) is loosing body paint from the side trim by itself, i can make out the silver body popping out after loosing its Black paint. its not even a month i bought it and it looks horrible ! Please help ?
"Can i get replacement ? ":
If Apple determines that it is defective, then yes.
"Is this problem common for iphone 5 black ?"
Some have this issue, most do not -
The latest update of my IPhone 3GS has failed, now i can't use the phone. I have tried to restore but i get a message saying 'Iphone could not be restored. An unknown error occured(6). I am running the latest version of itunes (10.4) Please help.
Place your iPhone in manual recovery mode or DFU mode.
1. Connect your iPhone
2. Open iTunes
3. Hold down the home and power button for 8 seconds. After 8 sec, let go of the power but still hold down the home button until iTunes recognize your phone in recovery mode -
I have never been able to do this since getting the phone last year. I just thought it was normal until a friend showed me he could do it on his. I dont have the screen which gives you the time and option to skip the track on which he had (like if you watch you tube).
Security questions:
https://discussions.apple.com/docs/DOC-4551
http://support.apple.com/kb/HT5312
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
If you don’t know your security questions, phone Apple (using the number listed here: http://support.apple.com/kb/HE57 ) and ask for the Account Security Team. -
HT4993 I buy in ebay the new iphone 5S sprint but i need the phone unlock please help me
I buy in ebay the iphone 5S sprint new but i need the phone unlock help me please
A Sprint iPhone can only be used with Sprint. It cannot be unlocked, except by Sprint. And they will only unlock it for use outside of the US, and only if you are a Sprint customer. The phone is useless to you if you don't want to use it with Sprint. Return it for a refund.
-
I cant get my ipad minis' keyboard to work how do you connect it?
is it something i need to charge or is it bluetooth powered?
Maybe you are looking for
-
Hide views in MM01 for all material type in one time
Hi, I have a requirement to hide the views for all material type at at time. i tried with OMS2 , it is allowing me to do for one matrial type. could any one tell me how to hide the views for all material type in one short. Thanks in adv..
-
The road to **** ...
... is paved with the tears of folks who just wanted to upgrade their iMacs! It is as if a demon has come along and possessed our computer. I replaced the PRAM battery and added 512 MB ram within the past six weeks. That went well. In fact, I posted
-
Search parameters are getting cleared after search result
Hi , We have created z component with search and search result view based on only value nodes. we are able to get search result with the give search criteria. After getting result search parameters are getting refreshed. how to keep those values in
-
The problem of using timer in long windows with scroll bar
Hello everybody! There is a problem of using timer in windows with scrolling. Lies in the fact that at the moment of the trigger "when-timer-expired", is "jumping" on the active field in the form (where the cursor). If the user scrolls at this moment
-
Using dialog-window in CE 7.1 without gray-scale
I'm using the new "dialog-popup" feauture in my CE 7.1 WebDynPro. When i'm integrating the WD into an Portal iView (eg. URL-IView or WebDynPro) the "gray-screen" is over the portal masthead. So I can't navigate anymore! I tried allready URL-Iview or