My Iphone 5s no longer connects to tunes wirelessly

I updated the ios to 8.0.2 and Itunes to the latest release.  It stopped being recognized a couple weeks ago, so I need to connect it with a cable.  Nothing on my network has changed and it connects to my wi fi with no problem.  My iphone never appears on itune

Hi PattiWagen, 
Welcome to the Apple Support Communities!
In this type of situation, I would recommend setting up Wi-Fi iTunes syncing again, making sure all of the settings in iTunes are correct. Please use the following article for instructions and further information. 
iOS: Syncing your data with iTunes
Sync using Wi-Fi
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable.
Click the Device button in the upper-right corner. (If viewing the iTunes Store, click the Library button first.) If you don't see your device, choose View > Hide Sidebar. 
In the Summary tab, select "Sync with this [device] over Wi-Fi."
When the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when the following conditions are true:
The iOS device is charging.
iTunes is open on the computer.
The iOS device and the computer are on the same Wi-Fi network.
While the iOS device is in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
If the iOS device doesn't appear in the Devices section or you can't sync, please try these steps.
Have a great day, 
Joe

Similar Messages

  • My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    My iPhone 4 no longer connects to my car or alarm clock after a recent sync to my computer.  The message at I get when trying to. Connect is "this accessory is not optimized for the device" or something like that.  Anyone know how to fix this?

    Hello there philp_69,
    If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • My iphone will no longer connect to my home wifi. it recognises it, but the searching cirlce is constant next to network name. there are three laptops and another iphone on the same wifi that have no issues. i have reset network settings

    my iphone will no longer connect to my home wifi. it recognises it, but the searching cirlce is constant next to network name. there are three laptops and another iphone on the same wifi that have no connectivity issues. i have reset the network settings but that did not help. the issue started last week when the second iphone was introduced to the house, could this be the cause?

    No.
    Any problem connecting your iPhone to any other wi-fi network besides your own?

  • Iphone 5 no longer connects to my PC after last update OS8.1

    Firstly I am not a "tech" expert and really do not understand the whole lingo etc - in fact I find it VERY overwhelming whenever I have an issue that needs to be solved with all the massive volume of technical jargon thrown around and end up being totally lost and frustrated - so if there is anyone who can help that will be just wonderful.
    I have an I-phone 5 and a Toshiba PC which runs Windows 7 - easy so far.
    I use my phone for a small business (otherwise I wouldn't have one at all) and when I go to do quotes I take photos and then downloaded them to my PC for future reference (I have ALWAYS been able to do this by simply plugging my phone into a free USB port (always use the same one for all devices) and away we go all works great.
    HOWEVER, since the last 2 updates my Iphone will no longer connect to my PC.  After the first one was botched (the one that was recalled quickly) and OS8.1 (which I know have) - whenever I do this exact same procedure my Iphone does no longer appear.
    How do I make it work again - the simple, easy, straightforward way that it used to (I guess that since the Apple thing has now been "improved" and made "better and easier" for me it will be impossible to do?

    Hello there philp_69,
    If I understand correctly it sounds like your phone hasnt been recognized in iTunes on your PC since the last couple of updates. I would use the troubleshooting in the following article which will walk you through the steps one by one. 
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • HT201184 My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    My itunes app on my iphone is no longer connecting to itunes after IOS update. Can you help me restore itunes on my iphone?

    Helo, I asked your question to be moved... good luck!

  • Iphone 5 no longer connects to wifi

    Iphone 5 no longer connects to wifi. Finds network, password correct but then ' cannot connect to network'. Connected to network till today, connects to other networks. Other iphone 5's are able to connect to this network. Please help?
    I have turned the phone on and off and reset the network settings. I have also turned the wifi switch on and off.

    Call Apple support or take it to an Apple store for evaluation. If it is defective they will replace it.

  • Iphone (5c) no longer connects iTunes to bluetooth since recent Apple iphone update

    iphone (5c) no longer connects iTunes through bluetooth since latest update (8.1.2)

    Hi Jill4547, 
    Thanks for participating in the Apple Support Communities. 
    It sounds like you're not able to sync your iPhone to iTunes wirelessly, or Bluetooth connections are not working as expected. 
    The iPhone syncs wirelessly to iTunes using a Wi-Fi connection. If you haven't been able to sync wirelessly since updating to iOS 8.1.2, you can use the steps in this article to check your sync settings in iTunes:
    Sync your iPhone, iPad and iPod touch with iTunes using Wi-Fi - Apple Support
    You can also use this article to troubleshoot the Wi-Fi connection on your iPhone:
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    For help with troubleshooting Bluetooth connections, see the tips in this article:
    iOS: Troubleshooting Bluetooth connections - Apple Support
    All the best,
    Jeremy 

  • My iPhone 3GS no longer connects through Bluetooth to my MacBook Air, nor my BMW X3.  Is this fixable?

    My iPhone 3GS no longer connects through Bluetooth to my MacBook Air nor my BMW X3.   I've made no recent adjustments, it's just stopped functioning.   Any ideas?   Can this be fixed, or is my iPhone on the way out?

    Problem solved!! I finally managed to pair the SE HCB-100 car kit speakerphone with the 3GS. I surfed the SE web site and it mentioned resetting the speakerphone. Tried it on 'one color ID' but it didn't work so I did it on all 'color IDs' and left it on reset mode when it 'accidentally' was picked up by my 3GS while searching!!! Found 'headset' and then recognised it as HCB-100. One happy guy for the holidays!!!

  • Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

    Hi, since upgrading to IOS 8.0.2 my iphone 5 no longer connects with the entertainment system in my car? Any ideas?

    So yesterday vibration suddenly started working again, after nearly two weeks with the problem above. I have no idea why, I didn't change any settings and the only app that was updated yesterday was Facebook messenger...

  • Can no longer connect to encripted wireless.

    Hello,
    I am running a wired and WPA TKIP Encripted wireless network through a WRT350N and Netopia DSL modem. I have a Western Digital Mybook Premium 500GB hard drive connected for storage.
    The system had included 2 XP Home PCs one using a Linksys WMP54GS Wireless PCI adapter and the other using a Netgear “G” USB adapter configured through Windows since the Netgear software would only do WEP.  There are also 2 laptops one being an older model with the Linksys “G” PCMCIA and a newer Core2Duo using Intel Proset.
    February I built a New PC which I connected via CAT5 which required moving the WRT350N, modem and 500GB MyBook into the computer room. In this room we also have our Dual mode 2.4 Ghz Linksys CIT300 Skype phone and our 2.4Ghz main phone. The new PC also has a Logitech G7 mouse using 2.4Ghz wireless. Everything ran smoothly for just over a month.
     Around the same time as the start of the network connection Issues I swapped the Motherboard in the New PC with an SLI version and set the machine back up still using CAT5 and no wireless.
    I cannot say for certain that we didn’t have any issues before the time of the swap but it did become very noticeable around the same time and I just want to cover all the bases.
    What happened is the wireless PCs slowed down a bit and then the Netgear connected PC started to have disconnect issues that were very noticeable since it was the machine that pulls our e-mail. We then noticed the Linksys G Desktop having connection speed issues and then finally all the wireless machines will no longer connect via encrypted wireless at all. If I reset the Router they connect without a problem. I can change the SSID and turn off the SSID Broadcast without a problem but the moment I turn on WPA Personal, TKIP, and set a password they all lose connection and will refuse to connect. I have sat down at each machine and deleted the wireless profiles and set them up with all the same SSID, Security, and keys but they will not connect.
    I even ran Net Stumbler on my Laptop to look for other wireless networks but only find one on Channel 11. Mine shows up too but at Channel 1 using the 40Mhz channel. Network mode is set to Mixed, Radio band is auto, Wide Channel is auto, Standard channel is also Auto.  
    Is there anything else I may be missing? I have reset the router many times and have tried restoring from saved configurations but nothing works at all. The only thing that works now is the wired connection. L
    I sure hope Linksys reads these forums because they sure do not read their tech support e-mails!
    I look forward to any help.
    Thanks,
    Martin

    First of all, re-download and re-install the latest firmware for your router.  After installing the latest firmware, make sure you reset the router to factory defaults, then set up the router from scratch.
    Next, make sure you have a unique SSID (don't use "linksys" ), and turn on SSID broadcast.  Turning on SSID broadcast makes it easier for your computers to find and stay connected to your router.   I used to recommend that SSID broadcast be turned off for security reasons, but this is no longer required because new "cracking" techniques have made this old trick useless.
    As a test, turn off all your 2.4 GHz devices and unplug them from the wall.  This would include your phones, wireless mouse, and any Bluetooth, wireless baby monitors, microwave ovens, wireless keyboards, etc.   Also, turn off any 5+ GHz phones, as some of these also use the 2.4 GHz band.   See if this makes a difference.
    Since your Netgear "would only do WEP", I don't understand how you ever got it to work before with WPA encryption.  Please explain.  Are you saying that the Windows software was doing the WPA for you? 
    Update you computers with the latest drivers for your wireless adapters.
    As infinityx mentioned, update Windows XP to at least SP2.
    It sounds like you may have the Intel Pro Wireless 2200bg card.  If so, this card is known to have connection problems.  The problems with this card worsened with a recent Windows update, but were fixed with the latest driver.  Go to the Intel web site and download and install the latest drivers.
    Also, you can try another channel on your router.  Since you have a neighbor on 11, try any channel 1 thru 6.  (Always try to stay at least +5 or -5 channels from your strongest neighbors.).
    Message Edited by toomanydonuts on 03-16-200704:01 AM

  • Since downloading iSO 5 i can no longer connect to a wireless network.

    since downloading iSO 5 i can no longer connect to a wireless network. I have tried both at home and at other wireless hotspots. it would appear that none of the previous wireless connections work either? i just get the error "unable to connect to "x"
    i have tried to "forget" and rejoin but that has not worked either.
    what to do pleeeease?

    Did you already try to reset the phone by holding the sleep and home button until the Apple logo comes back again?
    Did you try to reset the network settings on your device?

  • As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons.

    As i turned on my iphone 4s on and connected to a wireless internet a page opened from the app firewall ip and i usually choose all connections. so it got stuck i held the standy by button but it won't turn off. so i held the standyby and home buttons. when it opened all apps music and pics where not there. why? then i enterted photos and the loading logo appeared then the standyby appeared and i entered my password and everything in my iphone was there but thing were scattered and apps wheren't in folders everything was messed up but no photos or music AND IT SAYS UP IN THE MIDDLE OF THE SCREEN EXIT SAFE MODE. so i restarted it again and it opened and nothing was there and again i entered photos and the samething happen again. why did this happen? and can i get my data back? and in the usage it says that these thing are there but not showing.

    stevejobsfan0123 wrote:
    The Find my iPhone service option is given to you when you first set up the device. If you just reset it, you may have been given that option. So, in other words, the service may have been enabled even if you didn't realize it. You can then go to www.icloud.com and click on Find my iPhone, and have it play a sound. Or, you can use the Find my iPhone app on your mom's iPhone, but the service would still need to be turned on on your iPod.
    Unlike Compukid said, Apple will not assist in locating a lost device without the Find my iPhone service.
    I found that out 2 years ago, it's just that I thought Apple might have changed that.

  • I have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

    i have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

    Some updates and clarifications:
    1. I already have my 2.4 channel fixed.
    2. Wireless network name is 8 alphanumeric characters; no spaces
    3. Already using WPA2 security with a 10 alphanumeric key (again, no spaces)
    4. I am running Airport Utility 6.0, Mac OS version 10.7.4
    I should also say that these problems started happening less than a month ago...prior to that all devices where working normally.
    An added update: My two e-readers (nook ST and Kindle 3) are also refusing to connect...perhaps confirming that I have 2.4 GHz issues?

  • TS1398 My iPhone won't stay connected to my wireless. I have to keep repowering my phone and then it lasts for a few minutes until I have to reboot again. Any ideas? Anyone experienced the same?

    My iPhone won't stay connected to my wireless. I have to keep repowering my phone and then it lasts for a few minutes until I have to reboot again. Any ideas? Anyone experienced the same?

    HI:
    It does not sound like a battery problem.
    Try a couple of things:
    1.          Reset the SMC
    http://support.apple.com/kb/HT3964
    2.          Reset (if you can) the PRAM
    http://support.apple.com/kb/PH4405
    If that does not help, delete the mouse in system preferences, turn it off, restart, and turn the mouse back on.
    Barry
    P.S.  I only needed it once, but I have an old USB mouse in case my Bluetooth one decides to quit. 

  • Iphone 3gs no longer connects to itunes.

    I have just upgraded my itunes to 10.3 64 bit but since the upgrade my itunes no longer connects to my phone, its fine with my ipod classic, I;m using the iphone 3gs 32 g. I have tried all of the normal stuff deleting itunes reinstalling reseting my iphone etc but to no availl please help.my software version for my iphone is 4.3.3 (8 J 2 ) Cheers for any help .
    Deano

    Hi gofroggy08,
    Welcome to the Support Communities!
    It's possible that the iTunes software didn't update properly.   Try the specific steps below for the iPhone first:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    I hope this information helps ....
    - Judy

Maybe you are looking for

  • Export and Import of Queries

    Hello Experts, I wish to copy some queries from a production system to a development system for backup and QA. It seems to be a way to do so by export XML files, and then import them to the second system. Unfortunately, when trying to import the xml

  • Viewing reports in Access from GUI' s in Java

    hi i have reports created in microsoft Access and want to know how i can view these from my GUIs. the GUIs are connected to the database through JDBC and i want to be able to click on a button on a Gui and view the report. Can any help me. i have tri

  • How do I revert my display settings without being able to see the screen?

    I am using an Emerson led tv as a monitor, and when I tried to adjust the display settings to get a better resolution,I chose a resolution that wasn't supported. Now it is telling me to change the settings, but I can't see the screen anymore.

  • Unsigned driver?

    I have an HP Pavillion dv6000 and for some reason, the sound stopped working. It worked fine in headphones, but the speakers wouldn't work.. even though they worked fine yesterday. So I decided to uninstall the sound driver and then reinstall it... a

  • I keep getting an error cannot connect to iTunes store on my iPhone

    I keep getting an error cannot connect to iTunes store on my iPhone