My iphone 5s works everyplace else but in my home, where it cuts out constantly

My iphone 5s works everyplace else but in my home, where it custs out constantly. What could be causing this?

What could be causing this? Poor cellular coverage in your home. Interference from appliances, etc.
Contact your carrier and see if they offer a Microcell. A microcell is a small Cellular antenna that connects to your broadband Internet connection and provides a cellular signal in areas of poor cellular coverage.
I know AT&T offers one. I got one 2 years ago when I bought my house to fix issues with poor to nonexistant coverage in my basement and garage. It cost me $150 and provides 4-5 dots of coverage through the whole house.

Similar Messages

I have had my laptop stolen, and am trying to up load my music from my iphone to a new computer but how do i do it with out loosing everything?

I have had my laptop stolen, and am trying to up load my music from my iphone to a new computer but how do i do it with out loosing everything?

See this support article:
http://support.apple.com/kb/HT1848
You can also download most of your content again from the iTunes Store:
http://support.apple.com/kb/ht2519
For content not purchased from the iTunes Store, check out this post from Zevoneer for some iPod/iPhone media recovery options:
http://discussions.apple.com/thread.jspa?messageID=10570955#10570955
Regards.

I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled. I got it to work one time on another network but not at home where I use Lightr

I am unable to get Lightroom Mobile to work on my home network. The Ipad says "There are no collections to sync, enable lightroom mobile on your computer", but it is enabled. I got it to work one time on another network but not at home where I use Lightroom.

Hi,
could you please give us some info on what kind of network you have?
Can other application communicate with the web?
Thanks,
Ignacio

TS1398 3GS IPhone will not recognize a Wi-Fi connection at home or work. We have tried turning it on/off as well as turning airplane mode to on while turning it off then back on again. My 3GS IPhone is working fine with our router at home. Thanks

My husband's 3GS IPhone will not recognize a Wi-Fi connection at home or work. We have tried turning it on/off as well as turning airplane mode to on while turning it off then back on again. My 3GS IPhone is working fine with our router at home. Please advise what our next step should be. Thank you for taking the time to read this post!!

Just to double check you tried eveyrthing take a look at this link http://support.apple.com/kb/TS1398 .
Can also try powering off the home router, then the phone, and then power up the router wait for the signal and then power up the phone and see if he can connect.

Why, after three months of apple tv working perfectly fine, is it now cutting out constantly and the audio and video out of sinc?!@

Why, after three months of apple tv working perfectly fine, is it now cutting out constantly and the audio and video out of sinc?

Playing rentals, Netflix, from local iTunes, other?
Firstly restart router and AppleTv after unpowering to see if that helps - may or may not but quick and easy to try.
Connection via ethernet or wifi? If wifi are there any new devices in the house which may be causing interference or new neighbouring networks? If feasible try to eliminate wifi issues by using an ethernet connection.
AC

My Iphone isnt working and its not showing the home screen after trying yesterday to download OS5, please help me

hi
yesterday i tryed to sownload the new software OS5 for my iPhone and after waiting the proccess to end, suddenly a message appeares saying the iphone wont restore!
after that the iphone stop working at all and not showing the home screen to me !
just it works by showiin the apple logo then a loading process that works for ever till the barrerry ends.
so please help meand can i fix it here or i have to go to a maintinace shop
thank you

Connect the charger and let it charge for at least 30 minutes before you try to turn it on. Then let it charge untill full. The iPhone (or iPad) need at least a little charge before you can turn it on.

Exchange 2010 - iPhone will work in Wifi but not ATT 3g

Hello Everyone,
This is my first time posting, but I'm desparate!
I have an Exchange 2010 environment at our CoLo (not on site). I can connect to it on my iPhone 4 on ANY wifi network (home, work, etc), but if I connect to it via ATT 3g - no dice. I'm pretty sure it's a DNS issue, but there's no way for me to see what ATT DNS servers are returning. Anyone else have this problem? Does anyone know how long ATT caches DNS queries? Thanks in advance!
EDIT: It's totally DNS. I cannot hit OWA in safari either while on ATT, but again it works on WIFI everywhere. I setup DNS a little less than 24 hours ago, so I'm surprised that ATT is still having issues with it... Now I wonder if I can call ATT and see if they can flush the cached queries >.<

EDIT 2: Of course ATT was useless. Tried to transfer me away from them (to Apple and even Microsoft lol). I guess it's just a waiting game to see if their DNS servers get with the program...

When i plug in my iphone it works with itunes,but when i plug in my ipod it dosn't work

when i plug my iphone into the computer it works, but when i plug my ipod in it dosn't charge/or show up in itunes

Does the computer have iTunes 11?
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

My iPhone 4 worked fine yesterday an today the sound won't come out of the speakers from music and videos but worked on earphones and without earphones all I can hear is when Someone's calling me

Idk what I did

I got it out!
Here is how.
None of the Apple-suggested ways worked. However, before totally giving up I started Roxio Popcorn and pressed the big eject button on it. It came out effortlessly!
So, I thought "Weird..."
I put the CD back in and reproduced my original problem. I got it out just as easily using Roxio Popcorn Eject feature.
So, I then thought "Maybe it is the disk?" There is nothing wrong with the disk as far as I can tell. It is perfectly round, has a smooth label-side surface. It is not even a label, it is a standard software install disk you buy in stores.
I inserted a different disk. The mini mounted it, I browsed it, and then ejected it by dragging it to trash. Worked fine.
I tried a few other disks.
The drive seems to work fine.
Maybe that CD is cursed, I dunno. I tried that disk in my PowerBook and it works fine there.
Who knows ?
I am still backing up my hard drive as I type this message in case I need to take it to the store.

Photoshop jpegs work everywhere else but won't preview in Dreamweaver

Ok, I have a dreamweaver question, and I’m
hoping you can help me solve the trouble.
I am creating some images using photoshop. Building a site
locally and trying to see the images in dreamweaver.
They are standard RGB images, jpgs. When I pull them directly
into browsers, they all work great. For some crazy reason I
can’t get them to preview in dreamweaver. They show up as
broken links.
I have covered a few trouble shooting basics here, and still
haven’t figured it out.
1) the images are definitely RGB, and work in normal web
browsers, just not in dreamweaver.
2) In fact, when I preview the html in a browser via
dreamweaver the links seem to work. They are only broken in
dreamweaver itself.
3) I have pulled random jpegs off of the web, dropped them
into that same folder linked them up the same way and they work
fine. Only the jpegs I'm creating in photoshop seem to be causing
the trouble.
4) I have tried various options in the site management dialog
box including making links relative to the document or the site
root. Nothing changes.
5) I have exported the jpegs a number of different ways from
photoshop, via the normal “save” and also “save
for web”
6) When I save the jpegs as a gif instead, they work fine.
7) I have reset the root site several times, and rebooted
several times. No dice.

Post a link to one, please.
Which DW? Which OS?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Nathan McKinney" <[email protected]> wrote
in message
news:gorfbi$1ls$[email protected]..
>
Ok, I have a dreamweaver question, and I?m hoping you
can help
> me
> solve the trouble.
>
> I am creating some images using photoshop. Building a
site locally and
> trying
> to see the images in dreamweaver.
>
> They are standard RGB images, jpgs. When I pull them
directly into
> browsers,
> they all work great. For some crazy reason I can?t get
them to preview in
> dreamweaver. They show up as broken links.
>
> I have covered a few trouble shooting basics here, and
still haven?t
> figured
> it out.
>
> 1) the images are definitely RGB, and work in normal web
browsers, just
> not in
> dreamweaver.
> 2) In fact, when I preview the html in a browser via
dreamweaver the links
> seem to work. They are only broken in dreamweaver
itself.
> 3) I have pulled random jpegs off of the web, dropped
them into that same
> folder linked them up the same way and they work fine.
Only the jpegs I'm
> creating in photoshop seem to be causing the trouble.
> 4) I have tried various options in the site management
dialog box
> including
> making links relative to the document or the site root.
Nothing changes.
> 5) I have exported the jpegs a number of different ways
from photoshop,
> via
> the normal ?save? and also ?save for web?
> 6) When I save the jpegs as a gif instead, they work
fine.
> 7) I have reset the root site several times, and
rebooted several times.
> No
> dice.
>

Actionscripts works at school but not at home

I created a simple 3 buttons program using actionscripts 3.0. When I do a Control/Test Movie, the program runs throught the functions of the 3 buttons and repeats itself. I can take the same file to school and do Control/Test Movie and now the buttons work as it is suppose to. At home, if I do Debug/Debug Movie, I get a message that says "You can not debug this SWF because it does not contain Actionscript" but I can run it on the system at school. Am I missing some settings? Running XP, Flash CS4

I just saved it as a different name, same results.

IOS 4.1 exchange works over 3G but not over home wi-fi

I have seen several similar problems here but none exactly the same. I can setup and access my companies exchange email absolutely fine -mail & calendar - over the 3G connection (UK O2), but using it over my home wi-fi connection can neither set it up (verification fails) or, if I set it up over 3G but then try to access over wi-fi (unable to get mail) retrieve or send mail. I have tried delete/resetup the account, tried using server IP address rather than FQDN, tried using opendns rather than my ISPs dns server, nothing makes any difference. Was working fine prior to iOS4.
Any suggestions appreciated.

Just an update - spontaneously started working a few days later, suspect something at the Exchange server end.....

Will hp2543 work with more than one wifi connection it works at office but not at home

New printer set up to work with wifi at office but it doesn't work at home. Will it work at 2 or more locations and if so how do you set it up

Hi,
Yes BUT each location you have to set it up like a new printer and you have to switch forward backward on every move.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Windows 7 Firefox worked and still works on all but my admin account where it gives me the message below:

Gives me this message: Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.

In case anyone else has this problem I found the fix at:
https://mail.google.com/mail/?shva=1#inbox/1308ed79fc4dfa29
The file cert8.db in your profile folder may have become corrupted. Delete this file while the application (Firefox, SeaMonkey, etc) is closed.[1] To do this on Windows machines:
Close the application by choosing File -> Exit.
Open your profile folder in Windows Explorer.
Click on the file named cert8.db.
Press delete.
Restart the application. cert8.db will be recreated when you do so.

Okay, my gateway laptop crashed about 2 months ago and Im saving up for a new Mac. I want to use my iPhone 4 on the Mac, but how do I do that with out wiping my phoen clean or without my old laptop too. And I am not tech savvy so I need step by step.

So basically I'm a girl who can't figure out technology. I want my music and apps to stay and I want to be able to update my phone because it still has it's original software.

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

My iphone 5s works everyplace else but in my home, where it cuts out constantly

Similar Messages

Maybe you are looking for