My iPhone 6 is blocked when there is a missed call

I can not use my iPhone6 when it is locked and there is a missed call, it gives me the option to send a message but does not respond then I have to restart.

Settings>FaceTime  Turn off Cellular calling.  It is a new feature and only happens on Devices in the same WiFi Network belonging to the same Apple ID.

Similar Messages

  • How do I  see when there's a Missed call on Droid Pro

    I love my brand new Droid Pro - BUT there are a few things I'm taking too much time trying to figure out.  First - where do I see that there is a missed call? 
    Thanks - and I'm sure I'll be back on with more questions!
    DeenaM

    If the phone has an LED light, it should flash that there is a notification of some kind including missed calls.
    There will also be a symbol in the top left corner of screen and when you pull down the notification window, it will tell who called or for multiple missed calls the number of calls.
    You can also find the full manual online at either Verizon's or Motorola's website. It should explain most of the symbols used in the top notification bar.

  • "Recent calls" bagde showing up when there are no missed calls

    Sometimes I can see a badge with a number on the recent calls icon but there are no missed calls. Any ideas why?

    Try a resest: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

  • My iphone dosn't ring when there is a mail ,skype call ,face book notifications or twitter ?? !

    my iphone dosn't ring when there is a mail ,skype call ,facebook notifications or twitter ,,and dosen't make lock sounds or keyboard sounds however i turned it on and i think that there is no problem in the iphone cause i can listen to ringtones,,music and every thing ,,so what is the problem ,,hope you give me a quick reply,,,thank you

    Check here.

  • Isdn Layer 1 deactivated when there is no active call

    Hi All,
    I am in Nairobi Kenya. Here we use ISDN Basic-net3 and my problem is that most of the telco switches here deactivate Layer 1 when there is no active call.
    When I try to initiate a call by using the ISDN test call command I get an error to the effect that B channel is not available.
    The only way I can initiate a call is I first call the line then and then disconnect. Then I have about 5 seconds to make a test call and pings are successful. How do I make the router initiate a call when layer 1 is deactivated.
    the debug isdn q921 out has nothing till a call comes in.
    I also understatnd that European ISDN switches deactivate Layer 1 when there no active call. I dont have a problem with one of the switches, coz it does not bring down the line when there is no active call.
    Thakx in advance
    Martin

    Thanks for the quick response.
    It is a cisco 1760
    The IOS is c1700-sv3y-mz.122-15.T5.bin
    When I try to make a test call the show isdn status initially indicates that the router is trying to activate layer 1 then after 5 seconds it indicates that it is deactivated.
    I have not yet configured DDR as indicated in the config file
    Building configuration...
    Current configuration : 3054 bytes
    ! Last configuration change at 00:38:54 UTC Mon Aug 9 1993
    ! NVRAM config last updated at 00:36:54 UTC Mon Aug 9 1993
    version 12.2
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    hostname Gill-House
    logging queue-limit 100
    enable secret xxx
    ip subnet-zero
    no ip domain lookup
    isdn switch-type basic-net3
    no voice hpi capture buffer
    no voice hpi capture destination
    class-map match-all voice-traffic
    match ip rtp 16384 16383
    policy-map voice
    class voice-traffic
    priority 24
    class class-default
    fair-queue
    gw-accounting syslog
    interface Loopback0
    description Loopback interface for VoIP Dial-peers
    ip address 128.1.x.x.255.255.255
    interface Multilink1
    bandwidth 6
    ip address 128.1.x.x.255.255.252
    ip tcp header-compression iphc-format
    ppp multilink
    ppp multilink fragment-delay 20
    ppp multilink interleave
    multilink-group 1
    ip rtp header-compression iphc-format
    interface FastEthernet0/0
    description Gill-House LAN
    ip address 128.1.x.x.255.255.0
    speed auto
    interface Serial0/0
    description Link to Head Office
    bandwidth 64
    no ip address
    encapsulation ppp
    no fair-queue
    ppp multilink
    multilink-group 1
    interface BRI1/0
    ip address 10.10.1.2 255.255.255.0
    encapsulation ppp
    isdn switch-type basic-net3
    isdn point-to-point-setup
    keepalive 20
    router eigrp 100
    passive-interface FastEthernet0/0
    passive-interface Loopback0
    network 128.1.0.0
    no auto-summary
    no eigrp log-neighbor-changes
    ip classless
    no ip http server
    logging source-interface Loopback0
    logging 128.1.1.179
    call rsvp-sync
    voice-port 2/0
    cptone GB
    ring frequency 50
    voice-port 2/1
    cptone GB
    ring frequency 50
    dial-peer cor custom
    dial-peer voice 2 pots
    destination-pattern 101
    port 2/0
    dial-peer voice 51 voip
    destination-pattern 100
    session target ipv4:128.1.0.254
    ip qos dscp cs5 signaling
    dial-peer voice 55 voip
    destination-pattern 120
    session target ipv4:128.1.31.254
    ip qos dscp cs5 signaling
    dial-peer voice 52 voip
    destination-pattern 102
    session target ipv4:128.1.91.254
    ip qos dscp cs5 signaling
    dial-peer voice 53 voip
    destination-pattern 103
    session target ipv4:128.1.121.254
    ip qos dscp cs5 signaling
    dial-peer voice 54 voip
    destination-pattern 110
    session target ipv4:128.1.21.254
    ip qos dscp cs5 signaling
    dial-peer voice 56 voip
    destination-pattern 130
    session target ipv4:128.1.41.254
    ip qos dscp cs5 signaling
    dial-peer voice 57 voip
    destination-pattern 140
    session target ipv4:128.1.111.254
    ip qos dscp cs5 signaling
    dial-peer voice 58 voip
    destination-pattern 150
    session target ipv4:128.1.61.254
    ip qos dscp cs5 signaling
    dial-peer voice 59 voip
    destination-pattern 160
    session target ipv4:128.1.71.254
    ip qos dscp cs5 signaling
    line con 0
    logging synchronous
    line aux 0
    line vty 0 4
    password housing
    login
    ntp clock-period 17208074
    ntp server 128.1.1.211
    ntp server 128.1.0.254
    end
    Gill-House#

  • PRI channel busy issue , even when there are no active calls

    Hi All ,
    i using VWIC-2MFT - E1 CARD with VG. one PRI is working fine but on another PRI we are facing busy channel problem , even when there is no active calls , actually channels are not being free after disconnecting call. when we restart the gateway its startworking for some time ...
    i already replaced that card .
    please advice

    I believe that this post should be made to the Unified Communications and Video forum.
    Would please you repost to that group.
    Thanks

  • My iphone 5 get stuck in locked screen when two or more missed calls or messages shown on locked screen list

    My iphone 5 get stuck in locked screen when two or more missed calls or messages shown on locked screen list

    Hi bhagath1339,
    Welcome to the Apple Support Communities!
    The first troubleshooting steps I would recommend in this situation would be restarting and if the issue continues, resetting the iPhone.
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    If the issue continues after restarting and resetting, it may be necessary to restore your iPhone to isolate software versus hardware. Please follow the attached article if you need assistance restoring the device.
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Have a great day,
    Joe

  • I need a ringtone to alert me when i have a missed call?  can someone help?

    i need a ringtone to alert me when i have a missed call?  can someone help?

    THere's generally some type of default notification for a missed call - I'm not sure the point though, if you're not with your phone to hear it ring then how are you going to hear the missed call notification?

  • HT4623 my iphone 3g got blocked when my mate was trying to get into it and i got it unblocked and now it wont let me activate it ive tried all the diffrent sim cars and itunes keeps saying theres no sim card in the iphone disconnect

    my iphone 3 or 3gs  got blocked when my mate was trying to get into it and blocked it and i unblocked it now im trying to activate it and it wont activate  and ive tried to put diffrent sims in it and itunes keep saying theres no sim card in plz dissconect and  connect again

    sounds like the phone was previously jailbroken.  It will never work again.

  • Iphone 4s, Does not ring and vibrate when there is an incoming call. It shows as missed.

    Just bought a new iPhone 4 s and realised that sometime I could see missed calls without hearing the phone ringing. Tried several times with an other phone to place a call and could see that when phone goes in standby (screen black) and there is an incoming call the phone does not ring or vibrate. It does start to ring only if I press the round button. Has anybody experienced the problem? Can you help me? Thanks

    [email protected],
    Sorry to hear the phone is not always ringing like it should. We don't want you to miss any calls. Let's get that ringing for you again. Try resetting the network settings: http://vz.to/17Us9Pn . Retest and let us know how it's working.
    BrianP_VZW
    Follow Us on Twitter @VZWSupport

  • IPhone 3GS disconnects tethering when I receive/make a call

    I use my iPhone in the bluetooth tethered mode for about 8 hours a day when at work. I have a 10GB plan and tethering is allowed by the carrier (Singtel Singapore).
    However, ever since I upgraded to 3.1.3 my iPhone disconnects the tethering whenever I receive or make call. The iPhone reverts to the 2G mode and I can only switch it back after the call.
    To restore I do the following steps
    1. Toggle airplane mode to go back to 3G
    2. Go to network mode and enable tethering, it shows tethering as 'OFF'
    Its really frustrating, I have to keep interrupting my work on the laptop if I get a call, and more importantly I cannot look up information on the tethered laptop when I am on a call, really defeating the purpose of tethering.
    I have done several system restores, reset the network settings, all to no avail.
    Any guidance/help on this will vastly improve my workday!!

    this means there is something corrupt in your backup file.. unfortunately you keep restoring the same bad data onto the phone your going to have to restore as new and start over. If you replace the phone and restore the backup the same thing will happen over and over again. Your only option is to restore as new and sync your apps and music back on sorry.

  • I restored the iPhone 5 out of a backup and now missed calls are not showed in the notification center

    When I restore the iPhone as a new one, then it works. So the backup is senseless otherwise you're not able to see your missed calls in the NC.

    In the forum I found that switching notification off and back on helped.
    Worth a try, I would think.

  • How can I connect SP to PID block when there is no AI block ?

    Hi, I just started using NI-FBUS (NI USB-8486 with NI configurator 4.1) 
    for my device setup there are only AO, TB, RB and PID block. 
    Question 1. 
    Can I manually set SP in the configurator ? if so, can you please tell me how ? 
    Questino 2. 
    I tried to follow the tutorial in the manual but I don't have AI block.. then how can I 
    wire up my desired SP to PID block ? 
    Very much appreciated, 
    Thanks, 
    Solved!
    Go to Solution.

    Thank you for your help, Chris, 
    I have another question for you.. 
    perhaps i'm not understanding how to make this loop work ......
    please see the attachment, it's simple PID FBAP
    I'm trying to see if this loop works ok, 
    I've done changing the final value parameter in TB manually 
    and confirmed my positioner works fine. 
    Now, I want to see if the FBAP loop works and see the change. 
    However, How do i change the desired input in PC ? 
    Do I just have to change the parameters in blocks manuallly ??? 
    I tried to change the OUT value in teh AI block, but it's not responding at all. 
    Can I get some advices ?? 
    Thx, 
    Attachments:
    K-1.png ‏16 KB

  • Upgrade to IOS 6.1 - all incoming calls come in as a call waiting call when there is no other call going on, and it won't let me actually answer the call.

    I upgraded my AT&T iPhone 4 from IOS 6.0.1 to IOS 6.1 on Monday evening. It completed successfully overnight and everything looked good on Tuesday morning until I received my first call. When the phone rang, the screen showed the typical 'call waiting' screen, asking me if I wanted to 'End Call and Answer', 'Ignore Call', or 'Hold Call and Answer'. Using any of the selections still does not allow the call to be answered. It takes a hard reboot to clear the call.
    If I make an outgoing call, the phone hangs on the 'End Call' portion. It shows the button being pressed and that it is ending the call, but it doesn't ever end. It also takes a hard reboot to clear the call.
    So, I have tried hard reboots of the phone, without any success. Last night, I tried to reset the phone to factory settings and restored my phone content from iTunes. Unfortunately, I still was having the issue. I have also tried restoring the Network Settings, and that did not work as well.
    Has anyone seen any similar behavior and have any advice?
    Thanks

    A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
    *There has got to be a simpler way.*
    I hope you're right, but I don't think there is a simpler way.
    BACKUP:  It also appears that the only way I can back up the catalog is to shut down LR.  Really?!
    Yes, really

  • Why does my iPhone 5 lose signal when trying to make a call or use cellular data?

    Hello,
    I've had this problem for a few weeks now and it's becoming really annoying. Every time I try to make a call, or call voicemail, it takes me 10 or so attempts to connect. When it doesn't connect I get 'searching' in the top left hand corner whilst my phone try's to find signal again. I have the same problem when using 3G - it'll be fine for a while and then I lose my signal all together. This happens in places where I have enjoyed full signal strength in the past. I have dropped my phone or done anything to it to cause this. I've checked with my network provider, Giffgaff but it seems to be more of a phone problem rather than network.
    Has anyone had anything similar? If so how did you fix it? I'm thinking I need to take it into my local store to get it looked it.

    Hello Mathias267,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iPhone: Troubleshooting No Service
    http://support.apple.com/kb/ts4429
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Have a nice day,
    Mario

Maybe you are looking for

  • How to send email using pl/sql containing the result set as the msg body

    Hi.. im using Pl/SQL code to send emails to the users from a dataset that is obtained in a databse table. i have used utl_smtp commands to establish the connection with the smtp mail server. im stuck at the logic when i have to include the message bo

  • Imovie Novice:background music on iphoto slideshow - help :/

    It's my very first time using Imovie.. i have taken some photos that i want to upload to youtube/vimeo.... its a slideshow of 10 photos but i wanted to play a song in the background that about 3mins long..the song stops abruptly when the slideshow fi

  • Caching in FMS 2.0.4

    Hi, We have set up FMS 2.0.4 and want to find out if caching capability is available in FMS and information regarding cache settings. Please let me know if this information is already available somewhere. Any help on this topic would be helpful. Than

  • Migrate Security

    while migrating cube from dev to prod . can i also migrate the security which is in shared services. Do i have to create security again what would be the best way to do it can any one help me with this thank you

  • New mac book, cs6 after effects not opening, all cs6 products pixelated

    I just downloaded my cs6 suite to my new computer(Mac book Pro). All of the cs6 programs are appearing pixelated. Also my after effects will not open and says it cannot be run of this version of OS X. Any suggestions?