My iphone 6 stopped receiving calls after upgrading to ios 8.2

I have a new iPhone 6, 64 GB. I tried upgrading it 2 days ago to iOS 8.2.
The first time it froze for a long time and when it started, everything seemed
to be ok until I opened my messages, the screen froze then my messages opened a
blank page, then went opened a new message window, and I couldn't do anything
after, except close the messages. then I found out that my phone does not ring
when someone is trying to call me, so I tried calling my phone from a land line
and it shows it is ringing, but my iPhone 6 is not and does not show any
activity. it like its ringing somewhere else. I tried restoring it, and again
it did the same thing, the minute I open my messages. its like it triggers a
malfunction that crashes the hand set.
Has anyone experienced this, and is there a solution other than waiting for
the next update that will hopefully fix this problem?

Hello RayGas,
It may help to force close all apps and reset your iPhone.
Force an app to close in iOS
http://support.apple.com/en-us/HT5137
Turn your iOS device off and on (restart) and reset
http://support.apple.com/en-us/HT1430
If you're still not seeing any indication of incoming calls and Messages isnot functioning as expected, the next step would be to reinstall iOS on your device by placing it in Recovery Mode, then choosing Update in iTunes.
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on
https://support.apple.com/en-us/HT201412
Cheers,
Allen

Similar Messages

  • My iPhone 4s keeps restrating after upgrading to iOS 7.1.2 and comes up with recovery mode.

    My iPhone 4s keeps restrating after upgrading to iOS 7.1.2. I tried to restore for few times using iTunes and installed only 8 apps freshly from iTunes apps store. After restating the phone goes to recover mode every time. Last time it came up with a diagnostic massage with a big apple logo saying..'we are hanging there'. I am really frustrated with Apple coz my last mobile 3GS's network circuit was so poor that I could not use that to make call. However can any one help me with my iPhone 4s problem? I've no warranty left that's why I think apple will not help me any ways.

    Try changing the channel on your router to manually select & use,the highest number channel available.  After I did that I no longer had the problem. 

  • I am using Iphone 4 (not 4s) After upgrading to ios 5.0.1. is blocking. I live in Venezuela

    I am using Iphone 4 (not 4s) After upgrading to ios 5.0.1. is blocking. I live in Venezuela

    Without more information, I have to say it sounds like the phone you have was not legitimately unlocked, but had been hacked. Updating iOS will re-lock it to the original carrier.
    ONLY the carrier it is locked to can authorize unlocking it.
    Where did you get the phone?

  • Camera iphone 4 cdma blank after upgrade to ios 7.1

    camera iphone 4 cdma blank after upgrade to ios 7.1, before update to ios 7.1 all camera working good (front and rear) but after upgrade my rear camera still black screen but front camera was fine.
    help me plis

    Hello, hidrahmat. 
    Thank you for visiting Apple Support Communities. 
    This article will help your troubleshoot the camera issue with your iPhone.  See the section labeled Camera isn't functioning or has undesired image quality.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    If the issue persists, see the last section labeled Issue not resolved.
    Cheers,
    Jason H.

  • IPhone 5s not receiving iMessages after upgrading to iOS 8

    After upgrading to iOS 8 my iPhone 5s is not receiving iMessages from the rest of the family. My phone shows up green instead of blue on the other phones. I have tried all kinds of resets, turning off/on iMessages, etc. Nothing has worked so far. Any suggestions will be appreciated.

    Hi there eyab2010,
    I have an article for you that outlines some troubleshooting steps related to this issue with Messages:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • IPhone Bluetooth not working after upgrading to iOS 6.1.2

    I used to pair my iPhone with my Blue&Me system in my Fiat Car and it was working perfectly hitherto. Recently I have been experiencing problems with Pairing my phone with my car Bluetooth system (Which I sometimes use for receiving calls).. The phone though identifies the car system in the discovery mode but is not able to pair  and establish connection. My car Bluetooth system is working just fine with other phones. Request apple / or anyone who can help to help me overcome this issue. My car system is as important to me as iPhone and if this problem persists, i may be forced to change my phone.

    In the 4+ years of using iPhone and several other apple products, this is the first time that I am feeling frustrated with my iPhone 4S and Apple. I am surprised that so many people around the world are facing the problem with their blue tooth devices after upgrading the iOS and still there is no hope of having this situation resolved. The cause of breakage of communication between iPhone (my investment, my ownership) and other devices is of apple origin and apple can't walk away by suggesting that the other party should upgrade the Bluetooth Firmware.
    In my case, My iPhone 4S stopped paring with My Fiat car blue&me system after updating to iOS 6.1.2. The problem has not been solved in iOS 6.1.3.
    If this problem is not solved in next update the ovious solution is to move to android as I can change my phone but I can't change my car that eaisly.

  • Urgent! Phone can't make phone call after upgrading to ios 6

    Hi guys,
    I use my US factory unlocked iPhone 4s 32GB in China (Carrier is China Mobile). The phone can't make phone call (has no carrier service signal) after I upgraded its OS to ios 6. Does anybody know how to fix this problem?
    The facetime also missing after upgrading to ios 6.0
    Thanks in advance!

    Whenever I see "factory unlocked" I get suspicious, because there is no such thing as "factory unlocked". If you purchased the phone directly from Apple and the receipt says "unlocked" then it is unlocked. If you did not purchase it directly from Apple it was hacked to unlock it by whoever you bought it from. The "factory" was the back room of the shop. Unless you bought it directly from Apple (or an Apple-supported cellular carier) your phone was hacked, and updating it undid the hack. If this is the case there is no solution that can be discussed in an Apple-hosted forum.
    If you really did buy it unlocked directly from Apple then razmee's suggestion is the way to go.

  • IPhone and iHome Compatibility after upgrading to IOS 5

    I have an iPhone 4 which I recently upgraded to ios 5.  Prior to upgrading I was able to charge the phone on the iHome.  After the upgrade, it doesn't work.  I tried re-setting the phone, the iHome - at first this worked and let it charge.  Now it doesn't charge - still plays music fine.  The phone does charge with the adapter in the wall as well as an adapter for the car which charges and plays music over the airwaves.
    I upgraded my phone first and had the above.  My wife has the same iPhone 4 - same thing - charged and played music fine prior to upgrading.  Now it doesn't charge but plays music fine.
    So, what's the deal?  Any suggestions or is this a result of a problem with the upgrade softwar which needs to be fixed?
    Thanks

    My WiFi connection works fine, but 4G from ATT gives in 0.15 mpbs download. I called up ATT several times, but they have no resolution to this problem. Everytime they ask me to reset my network connection. This is a big deal for me as I am most of the time on Cellular Data and I need to use iPhone for my work. I am thinking to roll back to iOS 5.0.1. What in this world could turn a 3G phone into a 4G phone just by a software upgrade? I just feel like I am down to a 1G phone. Apple please fix this asap and release a patch, else I may not be able to use this phone.

  • IMac Facetime won't receive calls after upgrade to Mavericks

    Hi all,
    I am experiencing a strange issue with Facetime on my 2012 iMac running Mavericks.
    Here's the deal:
    Upgraded my iMac and MacBook Air to Mavericks
    I am able to PLACE calls from all machines (so my account seems to be working fine)
    When being called my iMac won't respond...no message, no sound, no nothing...plays dead man
    My MacBook Air behaves normally (also Mavericks)
    I have tried all of the following:
    disabled and re-enabled Facetime (to maybe override some config issue inherited from before the upgrade)
    tried to receive calls with and without Facetime running
    rebooted...several times
    all the latest updates are installed
    I have not (knowingly) changed anything after the upgrade. "Don't disturb" is off and Facetime calls are allowed for everyone.
    Any ideas?
    Best regards,
    Beschi

    Hi all, Problem not solved yet.
    Maybe you can give your 2 cents to my working hypothesis:
    Could it be that some background process/service is used to continuously monitor incoming requests/calls? Could it be that this process fires up Facetime and forwards incoming calls (Facetime calls are received without Facetime running, right? So something must capture them...)? Could it be that in my case this process is either not running or configured incorrectly (account, password)?
    Maybe you can put me on the right track?!
    Best regards,
    Frustrated Beschi

  • Can't hear or be heard on phone calls after upgrading to ios 5

    I recently upgraded my iphone 4 to ios 5 and afterwards my phone calls are mute.  Caller can't hear me nor can i hear them.  Blue tooth device only transmits music, no calls.  I have restored my iphone from the back up and also as a new phone with out any luck.  Any suggestions?  Thanks.

    Well after going to the apple store with no luck they referred me to apple care. They said even though my phone is out of warranty, upgrading to ios 5 screwed it up so they will place it back under warranty. This allows me to get the phone replaced at no cost. The new phone should be here tomorrow and I just send in the old one with pre-paid shipping. Give apple care a call.

  • I cannot place or receive calls since upgrading to ios 6.

    Sprint is my carrier.  I upgraded 2 iphone 4s and neither one will place or receive calls.

    I found the solution posted by cocomarie.
    Dial ##update# and push talk. It will give you a message that it is updating something then when it's complete the phone will work.

  • How to make my iPhone 4S work again after upgrading to iOS 5??

    After I accepted an upgrade of iOS 5 to my new iPhone 4S, it gives me a message (no SIM).  It was working fine before I downloaded the software.  Help please.

    Can you explain can't operate like before.. what exactly is the issue at hand?

  • My Iphone charges super slowly after upgrading to IOS 7

    My phone charges super slowly after upgrading . Usually it's take about 2hours for a full charge now it's not even 60%

    The iPhone will fast charge for the first 2 hours or so.. and then will trickle charge for the next couple of hours.
    Try putting it on Charge Over Night... Then monitor it for next the week or so... Charging as you normally do.
    More Info here... iPhone Charging the battery
    http://support.apple.com/kb/HT1476

  • Fix for my iPhone 3Gs WiFi problems after upgrade to iOS 4

    Posting incase this helps. I upgraded to iOS 4 on my 3Gs while away from home and came home to find that I couldn't get a reliable connection to my home WiFi which had been rock solid when I left two weeks ago.
    My network consistes of a telco supplied router & ADSL box connected by LAN to an Airport Extreme which then connects wirelessly to an Airport Time Machine in another room (actually a steel lined safe room so I have to be sure that the door is open). The Time Machine is set to act as a range extender as is an Airpot Express N I have connected to a hifi.
    Well after rebooting everything and scratching my head I took a look at the wireless settings on the base Airport Extreme. *It was set to 802.11n only!* I, therefore, have no idea how my iPhone was able to connect to this up to now. *I've set it now to 802.11n (b/g compatible)* and the iPhone once again connects and re-connects without any trouble at all.
    I know the 3Gs is not capable of 802.11n but I can assure you that for the last few months I haven't changed that router so it was certainly working in that 802.11n only mode on that apple router.

    Hey, that's a great tip for others who are having issues to check out. Thanks for posting your findings!

  • Iphone 5s Hangs randomly after upgrading to IOS 8

    I am bit worried about IOS upgrade. I am using Iphone 5s since March 2014. Till date it was working fine. But when I upgraded my Iphone from IOS 7.1.2 to IOS 8 problem starts arriving.
    Symptoms :      1. The phone hangs randomly after upgrade.
                            2. After selecting any application , it disappear suddenly. I have to start the application again. This mostly happen when I select Setting icon
    This is very much embarrassing that I am using one of the best phone in the world and it hangs automatically when I need it most.
    The only resolution for hang phone is to reboot.
    I upgraded to latest IOS 8.0.2 but still no improvement. I am expecting Apple team to look into this issue and resolve it. Waiting for your response.

    I have 5 Iphone 5's and Ipad Air. All upgraded to ios8. Everyone locks! it is so locked you have to hold home button and power button serial times. It reboots and just shows apple. When you use Safari, or type a text message, they just get behind then lock up with half a screen or half the icons.
    All my kids hate their devices now. I know Apple will fix. It is scary as i have never seen iPhones actually lock up and un-usable. this should have been caught in Beta. Perhaps Apple should get some "Real" outside normal users to beta. The ones they are using are not catching this stuff. Code is complicated, Apple has the best minds, Just keep holding the Home button and power button. Eventually it will reboot. Then close all the open apps. and don't tilt the phone sideways.
    Also close all un-used webpages left open in safari. this seems to fix.
    As for the Bug about lagging while texting and half screen lock ups. that needs to be fixed ASAP.
    I know from building things, there is always a few hiccups. Yelling won't do anything, give Apple a chance to fix it. I love Apple, and will continue to purchase the items. The world economy is changing, suppliers are going green, thus you get cheap bendable parts too. Apple will find the middle ground and work the problem. Please all post they read these blogs.
    If Apple deletes your posts and denies these problems then email Tim Cook. He does listen. Give it a week then it will all be sorted out. If apple sold iPhone 6 pluses that bend, then i am sure they will offer a replacement. Apple does care, May seem arrogant but they always come through at the end.
    Hang in there, i always rush and put the update on the minute it comes out, over and over, then complain about the bugs. Better to wait a month. i am addicted to new and better and just click upgrade. My fault too. I know better after 37 years with apple.
    Kind Regards,
    B

Maybe you are looking for

  • Howw do i unlock my ipod touch when it is disabled

    How do i unlock my ipod touch when its disabled

  • Can I use two FP-AO-210'​s and one FP-1000 to obtain 16 channels of analog output?

    Hello All, I'm new to both Fieldpoint and LabVIEW. I'm developing a control system that requires at least 9 channels of analog-only output. I have been trying to connect two FP-AO-210's to a single FP-1000 by connecting one FP-AO-210 directly to the

  • Search Help Exit and Cursor Position

    I have created a new search help, which returns the selected value into the applicable screen field correctly.  The problem is that there are multiple fields on the screen, and the first field keeps getting the cursor focus instead of the search help

  • SLD!!!

    We currently have our SLD running on the DEV server. What do we need to change - in all the systems (XI and R/3) if we moved the SLD to PROD XI server. E.g. - all XI servers need to be re-configured - config in SXMB_ADM --> "Integration Server Config

  • After Server 4.1 update, Time Machine backups are huge

    Hi, After updating to Server 4.1, every one of my Time Machine backups for the machine (Late 2012 iMac) running OS X Server (which is backed up to a USB connected drive) is between 3GB and 7GB.  When a backup finishes, I can immediately force a manua