My iphone automatically locked and it does not open again,but if u call the sim that was inserted you will hear that it was active,so please help me how to open my iphone 4,no display appeared if you touch the switch button

my iphone automatically locked and it does not open again,but if u call the sim that was inserted you will hear that it was active,so please help me how to open my iphone 4,no display appeared if you touch the switch button,

Hello arlyn-cavite,
If the screen is not showing anyting when you press any of the buttons you may want to try these steps.
From article iPhone: Hardware troubleshooting http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Take care,
Sterling

Similar Messages

  • My iphone is locked and i can NOT remember my pasword and we  really do not want to go to AT

    My iphone is locked and i can not remember by password and we really do not want to go to the AT&T to reset my phone! can anyone help?

    is your phone showing the connect to itunes (if it is all you can do is restore your phone in itunes)
    if it does not show that you have a chance to input the password but if you try to many times it will lock out out and tell you to connect to itunes. I dont think AT&T can help you restore your phone if you are locked out

  • HT5625 my iphone is lock and I can not shut me enter the cloud i do not remember that I do please someone help me

    my iphone is lock and I can not shut me enter the cloud i do not remember that I do please someone help me

    Chrisj4203, thank you for your kind answer.
    I have done a lot of restores to the Iphone, and resets also.
    I;ve done holding both buttons as you sugested, but there is no signal appearing.
    I am in Uruguay, South America and the original company is Movistar ( Telefonica) and the new sim card is from ANTEL ( the officail and biggest company in my country).
    I don;t knoe what todo.
    I have been trying for more than one mont.
    I have gone several times to both companies. Aldo two times to Apple uruguay, and nobody can help me.

  • My daughter's iphone got wet and camera does not work. She lives in Madbury, NH 03823. Where can she take it for repair?

    My daughter's iphone got wet and camera does not work. She lives in Madbury, NH 03823. Where can she take it for repair?

    Yes it does, although I wa a minute faster than you. To see if someone is parroting you, or that they just posted at the same time, look at the head of the post and it will show you the data and time of the post and who they were responding to. Looking at that first saves some misinformation in future posting.
    You'll see some posts where there will be 5 posts all in the same minute sometimes. Answer posts late at night and you won't see as many.
    BTW, I clicked the Like button on your post where you gave the link for the users manual.

  • I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS

    I have tried to update IOS 5.1 in my Iphone 4 and unfortunately I got an error message and phone is stucked at restore point. It is not coming back to normal mode and is not able to detect my phone in iTunes. Please help me how to recover my Iphone IOS, unfortunately I don't have my iphone backup too.

    we have a same problem

  • Unable to update, when executed table gets lock and Execution does not stop even for an hour.

    Following is my Query, which unables to update. When Executed, table gets lock and Execution does not stop even for an hour.
    update Employees 
          set Status = 'Close'
          where statusid IN (select statusid 
                                             from MyView 
                                              where DownloadedDate ='2014-07-27 00:00:00.000'
    here Employee contains 3,00,000 of records and Subquery return 1,50,000 Empid 
    i tried in various ways but not able to solve, statusid  column have no index on,  i tried using cursor but it does not work.
    plz let me know how to solve this Issue, Its very Important to get solve as all my further work depends on Updation
    , THANKS IN ADVANCE.

    See also your other thread with the same question:
    http://social.msdn.microsoft.com/Forums/en-US/80243625-fc3b-4ee1-bce1-4adcdbc16c14/unable-to-update-when-executed-table-gets-lock-execution-does-not-stop-execution-even-for-an-hour?forum=sqlserversamples
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it via internet the first time december 2013?)

    My Photoshop Elements does not start any more. It gives response "Photoshop elements cannot start or continue because of missing file(s). Please reinstall." How do I get the installing file again (I bought it from Adobe via internet the first time december 2013?)

    Did you download the Basic/Free version?
    I also thought the Trial period was as long as you needed!?
    What is your Warranty and Return Policy?
    You get to use VueScan for as long as you want before you buy it, so we recommend you test it before you buy it to make sure it meets your needs.
    All sales are final and there are no refunds.
    Isn't this a bit harsh? Naah I actually prefer to solve problems, and if I offer refunds, people give up too easily. If I can't solve your problem after you send a few Problem Reports (see above), I'm happy to give a refund.
    http://www.hamrick.com/sup.html#q

  • HT204053 I had to download ios7 and did not have icloud and now my iphone is locked and I can not do anything with it. I have an iphone 5. What do I need to do to fix it?

    I have an Iphone 5 and downloaded the new ios7 and now my phone is locked. It says I need to enter a passcode. but I never had a passcode, and I can not get into my phone. Please help me...

    Hi wutnoah,
    Thanks for visiting Apple Support Communities.
    See this article for a few different steps to try:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/HT1212
    If you are able to begin the restore process, but it does not complete, this article can help:
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    All the best,
    Jeremy

  • Iphone 4 will not charge and itunes does not recogise it at all.  When I plug it in to charge it says that it needs to be restored.

    My iphone 4 will not charge when I plug it in, it will turn on but it says that it needs to be restored and will not do anything else.  When I plug it into itunes it isn't recognized at all.  I took it into the verizon store and they were not any help at all.  My phone isn't under warranty anymore so they don't care.  Please help, I had to go back to my old phone, a droid and I hate it so much. 

    its fixed!!  After posting my problem with the FROZEN ipod classic (2007) 80 gb a screen popped up with similar subjects that I did not find in my original search.  'Rich Fleming' in the community posted a suggestion to someone with a similar frozen issue and it WORKED when I tried it. 
    hold the 'menu' and the 'circle' buttons down at the same time, KEEP the pressed until the apple appears. and now it is working.  Hope this helps others.

  • I have a new iPhone 6 Plus and Passbook does not show up in my settings.  Clearly I messed up somehow in the settings.  Any thoughts?

    I recently purchased an iPhone 6 Plus and tried to set up Apple Pay.  Passbook is not showing up in Settings.  I clearly missed something vital in settings.  Anyone else experience this?

    Hi ..
    Make sure your iOS version is correct.
    Tap Settings > General > About then swipe down to Version. It must be 8.1.
    If it's 8.1, instead of looking in Settings open the Passbook app itself.
    If you can't find it, drag down from the top of any screen then type Passbook in the search field.
    It should show up under:  TOP HITS
    "To set up Apple Pay on iPhone 6 or iPhone 6 Plus, open Passbook and follow the steps below."  >  Set up and use Apple Pay

  • My iPhone got stolen and FindMyiPhone does not work PLEASE HELP!

    Hello there.
    This is my first post and I got a question.
    Here's my story
    My iPhone 3GS got stolen this week and I had "FindmyiPhone" (iOS 5.0.1) configured, but when I try to locate my iPhone it will show up as "offline".
    I've once heared you can trace your iPhone by an EMEI or UPC number or something like that.
    Do you guys know more about that so I can trace down my iPhone and can show it the police?
    Thanks!
    Kind regards,
    Renzeau

    I just got my macbook pro stolen last night. the theive opened it and I got the email from findmyiphone. I can see which house it is at, but the thing is cops can't help. Im still watching it on my iphone waiting for them to ope it again so I can see its location. But Im already ****** as $%#% because 911 told me that they cant keep following a missing laptop.
    so that was my story, right now my macbook is showing as red also. But keep watching it because they have to turn it on eventually and as long as you check email me when found on icloud.com then you will get an email. Or you can also keep watching on your computer.
    So again go on icloud.com and sign in with the itunes account/email that you use on your iphone, you'll see the find my iPhone option there!

  • I did the upgrade to my iTunes yesterday and it did not install correctly. Kept getting same message.  Now cannot download any iTunes without getting windows error 126. Please help.

    Upgraded my itunes yesterday and it failed.  Tried reinstalling and failed again.  Now tried to install several earlier versions and coming up with  windows error 126. Do you have any ideas on how I can fix this?  Please help.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99732)

  • Hello, delete all of my iphone 3G SHSH and now does not work. any help?

    hi, my iphone 3g not reading, accidentally delete all SHSH, i nedd help.

    If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
    If it's happening on all apps including Apple's, then try closing them all completely and then see if they work when you re-open them : from the home screen (i.e.not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • My iphone is locked and we're not sure of the Apple ID / iCloud password

    last 2days before i have reset everthing from my iphone...
    Unfornately i have lost/forgotten my apple ID and passwords for my iphone. When the iphone powers on, it goes straight to an iCloud username & password request and I cannot get past it.
    I have installed iTunes on my laptop but it fails to connect to the server.
    i have all my phone bill with me were i purchased.........
    This is driving me crazy. I just want to reset everything now . Can anyone help?

    If you mean that the email you were using for your Apple ID "expired" and you changed it to a different email on the same Apple account (via the Edit button on Manage your Apple ID), then you need to do the following:
    1.     Go into Manage your Apple ID, sign in with your current ID and Edit the Apple ID back to the old email. This is temporary. Do NOT verify the email, do NOT change the password: Apple - My Apple ID
    2.     Go to the screen on your device asking for the iCloud password, and type in your current Apple ID password.
    3.     Once the device is up and running, go to Settings>iCloud and make sure that the old account is not still signed on. If it is, Sign it off.
    4.     Go back to Manage your Apple ID, sign on with the old Apple ID and current password, and change your Apple ID back to the current one. You may have to verify it again.
    5.     Sign onto iCloud on the device with your current Apple ID and password.
    Cheers,
    GB

  • Is there a way to access the passcode previously entered to access a wi-fi network that the MacBook Pro and iPhone automatically remembers and stores?

    Is there a way to access the passcode previously entered to access a wi-fi network that the MacBook Pro and iPhone automatically remembers and stores?

    Not on an iPhone, but on your Mac: Keychain Access>Enter the name of the WiFi network in the search bar>Info Button>Check Box "Show Password">Enter your Admin password>If will appear.

Maybe you are looking for

  • Is it easy to install a new DVD drive in my Powerbook?

    I recently posted a question about installing a new fan into my Powerbook G4. Someone put up a link to a photo-page of instructions that scared me right out of doing it myself. Big project. Now my internal CD/DVD drive is shot. Is it easy to install

  • How to view a multipage PDF in the form of a contact sheet?

    There are plenty of discussions over how to place a multipage PDF into an InDesign document ONE PAGE PER PAGE. But I fail to find out if there is a way (within a CS2 environment) to place a multipage PDF continuously as "thumbnails" either 1 : 1, or

  • NoSuchMethodError opening Worksheet, sqldeveloper 3.2.20.09.87

    Switched systems. Copied ~/.sqldeveloper Installed latest sqldeveloper 3.2.20.09.87. Imported settings when asked. Connection test success NoSuchMethodError when opening a worksheet or expanding open connection tree. Old sqldeveloper works fine: Java

  • Change the copy and paste format

    Does anyone know how to change OSX 10.5 copy and paste/clipboard format from PDF to PICT?

  • How can I report a step only if it is failed?

    In order to decrease the file size of my reports, I would like to only report certain Numeric Limit step results when they are failed.  Can someone tell me how to do this in the step itself?