My iphone can't power up

Hi to all expert,
Today, My iphone battery leave 1%. And I forget to charge, now I cant power up the iphone. May someone advise how can I power up my iphone. Thank you

Some users report to just leave your phone plugged into the wall socket for a few hours and it should come good.
See if that helps
Message was edited by: actionmarker

Similar Messages

  • HT201210 May i know what happening if my Iphone, can not power On (black-out) same like battery totally flat but actually the battery is fully charged. All information in Iphone all lose & can not restore

    Anybody know what happen if iphone can not power On (black-out)? only connected external power source then it will show connect to itune. 
    all information lost & software can not be restored (Error 1611). Thanks.

    error 1611 http://support.apple.com/kb/TS3694#error1611

  • Iphone can't power off and sceen hang on to apple icon

    Hi my iphone can't power ?

    Try a Hard Reset, hold the sleep/power button and the home button together for about 20 secs. you wont lose any data doing this. it should reset the phone.

  • Iphone 6plus can't power on

    I bought my iPhone 6 plus in Boston, but now I went back to China, unfortunately, my iphone  can't power on,  but Apple support in China refuse to change new one because  I bought it in US, so could you give me help or contact with me?

    Thank you for your response.
    Yes, it is full, I went to apple support in China, they told me it was hardware problem, it need to change a new machine!
    Did you know the email about US apple support department, it is hard to call them when I am in China now.

  • Can I keep plugging in my iphone to the power supply despite fully charged to reduce the battery cycle?

    Since an iphone battery lasts for 300-500 cycles before losing its juice, can I just continuously connect my iphone to the power supply to avoid using the battery, like how I use my macbook.

    Yes, you can but best read this
    http://www.apple.com/batteries/iphone.html

  • URGENT: iphone 4 hang, can't power down, can't receive calls, can't do anything

    I've been using my iphone 4 for more since I got it when it came out 1.5 yrs ago with hardly any problems.
    I updated to OS5 few weeks back and was totally Ok until today, I started my gmail, and the phone froze and the swirling symbol is going next to my full WiFi Access and ATT 2 bars signal strength.
    It's been more than 30 mnts, and can't receive calls, can't power it down, and nothing I pressed or did seems to affect the device.
    What do I do?

    Well, first, you can't revert back to OS 4.x, and second, a search of the forum will quickly show you that this could happen with 4.x, 3.x, 2.x and ever the original iPhone Classic.
    And don't think of the iPhone as a phone; it's a very powerful pocket sized computer that can also make phone calls. And it can suffer all of the things that happen to any computer, like the Windows Blue Screen of Death and the Mac OS X kernel panic (which is what happened). It happens when memory gets full (RAM, not storage) or when one app steps on the memory of another. You can minimize the chance of it happening by turning the phone off occasionally, which shuts down all of the apps.

  • HT4061 I can't power on my Iphone?

    I can't power on my Iphone?

    The following link gives instructions on how to find a serial number: http://support.apple.com/kb/HT2526

  • My iphone is frozen and i can't power off

    please i want repair my iphone if is possible send me email at [email protected], give a steps for repair,its frozen and i can't power off

    Hold down on the sleep button and home buttons at the same time for about 10 seconds until the Apple logo appears on the screen. Let go of the buttons. Ignore the red slider if it appears.

  • IPhone stuck on gestures (Pinch) screen - can't power off

    Hi hi - My home button died a few days ago so I've been using the Accessibility version, the onscreen white spot.
    While adding new gestures via the "spot", the Gestures menu froze with only the Pinch option showing in the top-left (but not functioning). The menu is now laid over my lock screen (my phone autolocks after two mins) and I can't cancel it, select any gestures, unlock my iPhone or even power it off - holding down the power button produces the regular "Slide to power off" bar but the Gestures menu is preventing me from sliding it.
    I'm effectively stuck with an iPhone that won't turn on or off, with a full battery that's not going to die for days.
    Has anyone else experienced this issue?
    Many thanks.  ^___^

    Hold home and power button for 20 seconds. If this is not working because home button is stuck try to connect iPhone to iTunes and restore iPhone.

  • Update to iOS8.1 on iPhone 6, getting a flashing red screen alternating with Apple screen. Can't power off or do anything else.

    While updating to iOS, it appeared that the download was progressing so I laid my phone down. Checked about a half hour later and I now have a continuously flashing red screen that alternates with the Apple screen. I can't power the device off nor use the home button. iTunes doesn't recognize the phone so can't sync or reload.

    Hello rwax,
    The troulbeshooting steps detailed below can help get your iPhone to successfully power on.
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    iOS: Not responding or does not turn on
    http://support.apple.com/en-us/TS3281
    Cheers,
    Allen

  • Where can i repair my iphone 5 lock/power button?

    I have a problem with my iphone 5 lock/power button, it works randomly, but the main issue is that my carrier won't agree to repair/replace it under warranty since it has some minor scratches in the sides.
    Here (at mexico) we do not have apple stores so I can't take it there, also apple refuses to take it under warranty because the iphone was purchased directly with the carrier. Any suggestions on how can i solve this issue?
    I think it kinda lame to have the year long warranty just to realize you cant make it valid here at mexico under some dumb technicallity.

    Until you sort out the "dumb technicallity". Use Assistive Touch for perfect Virtual Lock Button. Tap Settings App > General > Accessibility > Assistive Touch > ON > tap new white screen button > Device > Lock. This can even be used to turn iPhone OFF. To turn ON connect to power, charger or USB of computer.

  • My iPhone is stuck on the apple screen. How can I power it off?

    How can I power off my phone,it is stuck on the apple screen?

    Hello GrayLady6,
    Thank you for your question. It sounds like your phone is not responding and is stuck at the Apple logo. I would next reset the device with this process:
    Reset
    You should reset your device as a last resort and only if you can't restart it.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    From: Turn your iOS device off and on (restart) and reset
              http://support.apple.com/kb/ht1430
    If this does not resolve your issue, I would next attenot putting the device into recovery mode and then restoring it with iTunes:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • IPhone can't connect to my wifi, can connect to others. My other devices are fine. Basic T-shooting steps fail.

    Sorry for the repeat post but I want to get more help with this.
    Prior to problem: All devices surfing wirelessly on Airport Express.
    Replaced Airport Express with Time Capsule.
    Problem: Wife's iPhone4 (5.1.1) can not surf on wifi provided by my time capsule. All my other devices (iMac, Mac Air, iPad and my iPhone) can. Wife's iPhone can surf on an unsecure network somewhere nearby in my apartment complex. (Which to me, rules out a hardware problem).
    Steps taken: Tapped iPhone wifi On/Off multiple times with no change. "Forget this network" multiple times with no change. Reset iPhone Network Settings multiple times with no change. Restored iPhone using iTunes as New iPhone once with no change. (Since doing that, I have restored with back up of iPhone settings and data.) Powered Time Capsule on/off several times with no change. Turned wireless security off with no change. Security is back on. It is WPA 2 Personal with a lengthy password. I'm not getting the "incorrect password" msg. Renewed lease multiple times with no change.
    Other indications: 3G is in upper left. Status wheel is spinning next to my network's name. On the initial "Settings" window, my network name is shown (as if it were connected. But tapping it and going to the "wifi networks" window shows the list of available networks with the status wheel spinning next to mine.) Tapping the blue arrow on my network name leads to the window that has "forget this network" at the top, and a list of blank fields: IP address, subnet mask, router and so on. DHCP is chosen, HTTP proxy is OFF. Sometimes, the top two fields (ip address and subnet mask) have values filled in, but the rest of the fields don't.
    On my Time Capsule, as seen via Airport Utility (V5.5.3), 3 devices are shown as connected. Clicking this provides a listing. My wife's iPhone wi-fi address is listed. It's "rate" however is 1. My imac is 216 and my iphone is 65. BTW, iOS devices drop off the list when they go to sleep. No big deal there.
    Back to Airport Utility, in the summary tab... status is normal, version is 7.6.1, wireless mode is "create a wireless network", security is "wpa/wpa2 personal", channel is 149 auto and 1 auto (I tried changing 1 to 11 with no change), connect using "ethernet" and finally my IP address begings with 76. 76.xxx.xxx.xxx
    Moving to the "Wireless" tab of Airport utility... wireless mode is "create a wireless network", radio mode is auto, radio ch. selection is auto, wireless security is wpa/wpa2 personal, "remember password in keychain" is checked.   Now Clicking on the "wireless network options" button..... 5ghz is not checked, country is USA, multicast rate is "low", t-mit power is "100%", WPA group key timeout is 1 day (it used to be 1 hour but this has made no change in the problem), "use wide channels" is not checked, "create a closed network" is not checked.
    MAC access control is not enabled. But it was enabled previously and I added my devices by their Wi-Fi addresses one at a time until i decided to turn it off due to this problem. this resulted in no change with the problem.
    Personally, I feel the prob lies with the DHCP and ip address and related fields, but I don't know enough about what their values should be in relation to my other devices to alter them on my own.

    I pasted below a response that helped.... sort of. I followed the directions below. At the end, all my devices were connected to my network. BUT, the last device I connected, my MacAir, did not stay connected for long. It now has the exclamation point in the middle of the wi-fi icon in the top right of the screen.
    This event agrees with my original problem: It was my wife's iPhone that was the last to be connected to my network and the only one to fail to connect.
    Is there a limit to how many devices can be connected to my time capsule? I have 5 devices. What is "extending?" Do I need to do that?
    Bob Timmons Texas
    This solved my questionRe: Airport Express wifi network not working 
    Mar 1, 2012 1:46 PM (in response to Don_McCracken)
    Open AirPort Utility and click Manual Setup
    Click the Internet icon, then click the Internet Connection tab
    Make sure that the setting for Connection Sharing = Off (Bridge Mode)
    Update to save any changes
    Then power down the entire network...all devices....power down order is not important
    Wait a few minutes
    Power up the modem/router first and let it run a full minute by itself
    Power up the Express the same way
    Continue powering up devices one at a time the same way until everything is powered back up
    You should be able to connect through the Express and on to the Internet

  • Iphone 4 when power on stuck in itune logo, is it possible to do back up now? (never do back up in pc/icloud before)

    Please help..
    iphone 4 when power on stuck in itune logo, is it possible to do back up now? (never do back up in pc/icloud before)

    You could try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. If it still shows the "connect to iTunes" screen, you can't do anything than restore it using recovery mode, explained here:
    iOS: Unable to update or restore
    And at this point backups can't be taken anymore, sorry.

  • Iphone 4 will power on, won't do anything elese

    Iphone 4 will power on, it will allow you to text but nothing else.  Hard start has been tried  with no luck.  Phone shows app screens with no problems.

    Hello h4davis,
    Thank you for the details of the issue you are experiencing after updating your iPhone.  If you have not resolved the issue, I recommend following the steps in the article below for an issue like this:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

Maybe you are looking for

  • Want to use my Apple Airport Extreme

    I want to use my Apple AE as the wireless router. Rather than hooking directly from the FIOS box (as others have suggested), I want to know if hooking up to a stand-alone actiontec Verizon Coax Network adapter will let me use my AE. I don't need all

  • I'm dissapointed in the lack of Music Videos available?

    Now I have my 80Gb video ipod since Christmas and I want to build a nice collection of music videos. However, the selection on iTunes is poor and not all music videos are accessible from the main music videos page. Many seem hidden. Apple needs to ma

  • Issue with richtables after file download

    Hello. Please help me solve the next problem. I have two tables (master-detail) on my page and a commandButton with af:fileDownloadActionListener assigned to it. After filtering tables i press commandButton and download Excel file with the content fr

  • How to address an cell in a boolean array

    Hello I am intersted in addessing a certain cell in a boolean array. Suppose I have a boolean array called bArr which is of length 10 and contains  values  of { T,T,F,F,F,F,T,F,T,F } and I want to send to an "AND" gate bArr[0] together with  "TRUE" c

  • Align Stroke to Center

    As you can see here: http://img.photobucket.com/albums/v40/fotthewuk/ai-centre-stroke.gif ... whereas 'Align Stroke to Inside' and 'Align Stroke to Outside' produce clean, crisp results, 'Align Stroke to Centre' produces an inaccurate, skewed, de-for