My iPhone cant reach any mobile network signals what do i do

my iPhone cant reach any mobile network signals what do i do

Have you talked to your cell provider? 

Similar Messages

  • My iPad 2 has stopped picking up mobile network signals once it moves out of a WIFI zone. Please advise

    My IPad2 has stopped picking up mobile network signals once it moves out of a WIFI Zone.  any possible reason?

    Unbelievable.
    After taking all the time to write and post that, I then switched "airplane mode" on and off again and it started picking up the 3G signal fine.
    I had read a couple of threads about Ipads / Iphones "locking" onto GPRS and this being the only way to switch them back, but I DEFINITELY tried this before the IOS 7 upgrade and it didn't help.
    So was it just a coincidence this time or did the upgrade make a difference? No way of telling I suppose so no help if you're reading this looking for a solution. I can only keep an eye on it and see if this becomes a regular problem......

  • Issue with mobile network signal ("Searching")

    I recently purchased 2 iPad from Singapore and upon retuning to Malaysia, i applied for 2 mobile broadband package from the same mobile provider.
    Issue i am facing is, on one of the ipad, the mobile network signal bar displays "Searching" almost all the time; only a few times it displays strong signal with 3G icon then it drops to "Searching" again. I tried to swap the micro sim around between both ipad but no such issue on the 2nd ipad which is consistenly strong signal.
    I even restored the ipad (factory shipped 3.2.2) but no success.
    What should i do?

    After further test, I noticed the unit can't find any mobile provider under Settings > Carrier when signal bar displays "Searching".
    Enabling airplane mode does not help either; only workaround is to disable Cellular Data under Settings > Cellular Data then Enable it again.

  • How to activate iphone 4 to any GSM network with MEP code

    Hi,can you tell me people what's the best site to activate or unlock my iphone 4 to any GSM network, (only trusted sites)
    i want to pay for unlock it, is not locked it, please help me with this issue, i would be glad with any help

    This phone is locked because its been sold/supplied at a subsidized contract price which is a standard practise in many EU countries.
    Now all EU Mobile operators are required to offer an unlock facility however are able to impose qualifying periods and charge if they want.
    You have to contact Vodafone Spain and ask them to supply Apple with the unlock request.
    That also assumes that the Vodafone Spain account is in YOUR name and that the phone is in Spain at the time.
    THEY WILL KNOW from the imei number if its on their network or not!
    They may also make a charge €25-30 going rate and may impose a three month minimum contract period before allowing the unlock to take place. (Revenue protection on subsidized phone rule)
    The ONLY sure way to get an UNLOCKED iPhone is via Apple Retail direct and at full price.
    If you can't meet those criteria you have little choice but to Sell the phone back to the Spanish market via eBay (Spain) or look away from these forums for unsupported jailbreak options.
    Be aware these carry risks to the security stability and warranty of your iPhone.

  • Z30 - Mobile Network signal issue

    Hi!
    i am using Z30 for last about 2 months.
    facing problem in dropping and varying mobile signal strength,
    while other devices incl. older BB devices are showing steady signal strength at same place same time.
    also facing call quality deterioration while calling
    please....help!!!

    deebee11 wrote:
    sorry....omitted to mention..
    online through flipkart...pvt online shopping...
    OK, and if you will, please look at the Settings > Network and Connections > Mobile Network.
    Tap the Network Technology. What do you have set there, and what are the other choices?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Does iphone use wifi or mobile network preferentially?

    Hi - stupid question really...
    If connected to a wifi network (e.g. at home), does the iphone use this instead of the mobile network, therefore, saving on you data allowance?
    Or is there a setting you can change so it does this?

    Hey tkoe,
    The iPhone will connect to the Internet over the fastest connection available, Wi-Fi>3G>EDGE.
    +"How iPhone Connects to the Internet+
    +iPhone connects to the Internet using either a Wi-Fi network or a cellular data network.+
    +iPhone does the following, in order, until connected:+
    +Connects over the last Wi-Fi network you used that’s available.+
    +If no previously used Wi-Fi networks are available, iPhone shows a list of Wi-Fi+
    +networks in range. Tap a network and, if necessary, enter the password to join.+
    +Networks that require a password show next to them. You can prevent iPhone+
    +from automatically showing available networks. See “Wi-Fi” on page 102.+
    +If no Wi-Fi networks are available or you choose not to join any, iPhone connects to+
    +the Internet over a cellular data network ( , , or ). You cannot access the iTunes+
    +Wi-Fi Music Store over a cellular data network.+
    +If no Wi-Fi networks are available and a cellular data network isn’t available, iPhone+
    +cannot connect to the Internet. "+ From page 30 of the iPhone User Guide
    http://manuals.info.apple.com/en/iPhoneUserGuide.pdf
    Jason

  • Music wont sync on my new iphone 4s. Restored it from a backup and now there's no music on it. In the music tab it says: Thomas iPhone has access to music on iCloud. Songs can be fetched via WIFI or a mobile network. What to do?

    Restored it from a backup and now there's no music on it. In the music tab it iTunes says: Thomas iPhone has access to music on iCloud. Songs can be fetched via WIFI or a mobile network. The pnly thing I can chose to sync are voice memos.
    What can I do?

    If you want all the songs from an artist on your phone you can to to the artist view, tap on the artist, scroll to the bottom of the list and you will see a Download All button.  This works for playlists and albums too (scroll to the bottom and tap the Download All button).  I suppose if you wanted all your music on your phone you could create a smart playlist in iTunes on your computer that would contain all your music, upload it to iTunes match (Store>Update iTunes Match), and then you would get a Download All button at the bottom of this playlist on your phone to download all your songs.

  • Nokia N8 cant find a mobile network

    I bought a used Nokia N8 (without sim) which was reset to factory settings by the last owner.
    i used my sim on it and it loads up fine but i cant register the sim card because it doesnt have a mobile network available? i also cant phone with it etc. when i try to find the mobile network it says no access.
    I think i have tried everything to gain access on it phone wise could it be a sim problem?

    @TryMar
    If this is T-Mobile (UK) you could always call them from landline on 0845-4125000 and provide the sim serial number located at the back of your sim. it's 2 set of numbers and they will be able to verify whether the sim is active.
    Happy to have helped forum with a Support Ratio = 42.5

  • Update to ISO 6.0.2 keep loosing signal, getting no service, we use two iphone 4 and 5 I update it and others its ok, pretty sure it's update couse losing network signal , what shall I do ?

    Keep getting no service since update the iphone to ISO 6.0.2 .
    We have two iphone 4 and 5, 5 update and no service and 4 it's ok, same network.
    Apple could you help me with this please ?
    I do a lot work with phone and now I have phone only works with wi fi and keep breaking on my network.
    Thanks.

    My wife's iPhone 5 is having the same issue.  I also have an iPhone 5 with iOS 6.0.2 and mine works perfectly.  Not sure what can be the issue. 

  • I broke my iPhone 4s screen, i gave it for repairing & before i gave it for repairing my wifi was working totally fine & now all of sudden my iPhone cant detect any wifi, it would only detect if iPhone is placed beside router! Is it hardware prob?

    If yes than the repairer wont take  the responsibility & is denying that it is hardware problem! what should i do?

    Pursue the matter with whoever repaired your iPhone. When you had
    an unauthorized service open your iPhone, you voided your warranty.
    Most likely the repair knocked something else loose in the iPhone or otherwise
    damaged the hardware.

  • TS3297 iphone will let me download apps but wont let me update the apps that are already downloaded. I get message saying that my iphone cant connect to itunes store. What should I do?

    im trying to fix this and have already synced my phone with itunes and restarted my phone, but nothing is working. does anyone know how to fix this?

    If only some of the songs on an album are giving you the authorisation message, that suggests those song files are damaged.
    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • HT201269 The steps aboved did not work and actually deleted all contacts and photos on my new iPhone; is there any way to recover what was deleted on the new iPhone?

    details about post above; please help if you know how to recover photos and contacts.

    If you do not have a backup, sorry it's gone.

  • I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

    I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

    Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
    1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
    2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
    3. Do a soft and hard reset.
    4. Reset network settings.
    5. Back your data up, erase all content from settings menu, restore from backup.
    6. Reinstall your software( put it in recovery mode).
    I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

  • Wifi cant find ANY network!!!!!!!!!

    My iphone 4s won't connect or cant find any WiFi network, and i know its not my WiFi because everything else in the house connects, I've tried everything, resetting my phone, network everything! still nothing and sometimes it'll even grey out when i reset and when i can finally get it to work, it works for a couple of minutes and lose connection again.

    Try searching this forum for the hundreds of other threads about this very issue.

  • Iphone cant find hp 210a airprint

    iphone cant find any printer airprint., have a hp aio wifi b210a, it is on the same network and i have no problems printing from my imac on wifi,??????
    what to do.???

    Hi Andrew.
    Thank u for u´r help.
    i can say yes to 1-4, and i´ve decided to by af timecapsule, then i think my problems will be solved.?? :-)
    Can u help me with this:
    I want to upgrade my osx, but i don´t know if i can upgrade to LION from my OSX.
    i´ve got 10.5.8 - Imac, 2,4GHz Intel Core 2 Duo - 2 GB 667 MHz DDR2 SDRAM..
    If i cant´t upgrade to LION, then what do i do first.??
    Hope to hear from u soon.

Maybe you are looking for

  • DECODE OR CASE - Which is better and why

    Oracle version: 11.2 Problem: We have a huge table with 10M records, which needs to be processed daily. While loading data in table we have to handle condition if flag is =1 then '111' else '000' To implement this which one is efficient solution? ..

  • Oracle JDeveloper 10g version 9.0.5.2 download

    Dear All, I am not able to download Oracle JDeveloper 10g version 9.0.5.2 which supports application migration assistance. Please let me know the link from where I can download the same. Thank You very much, Pabitra Dash

  • Infocube to contain only last 7 requests

    Hi , Please help me with this issue . . . .for BW 7.0 I am having a infocube which is having a daily load. the previous load is deleted everyday. Now i want to archive this infocubes data to another infocube and this archive cube should contain only

  • How to access a sharepoint site via the REST API in Python?

    I have the following site: http://win-5a8pp4v402g/sharepoint_test/site_1/ When I access this from the browser, it prompts me for the username and password and then works fine. However I am trying to do the same using the REST API in Python. I am usin

  • Dinamic query on 8.0.5 db

    Hi. I4m traying to make a dinamic query as: "select ec_ctnt.filename from ec_ctnt, ec_prditm_ctntlst where ec_ctnt.ctntid = ec_prditm_ctntlst.ctntid and ec_prditm_ctntlst.prditmid = ?" using thin jdbc driver, but compiling it with JDeveloper obtain t