My iphone cs5 wont synchronise its says that he could not finish

I am trying to sync my iphone 5s on my  MacBook Pro, 2,5 GHz Intel Core i7
and its saying that it could not finish the sync. because the session could not finish
help !

Did you already try the troubleshooting?
Get help activating your iPhone

Similar Messages

  • I updated my iphone 3gs to ios 5.0.1 from ios 4 , now its saying that sim is not activated but the sim is still inside

    i updated my iphone 3gs to ios 5.0.1 from ios 4 , now its saying that sim is not activated but the sim is still inside
    PLSS HELP ME OUT !!!!

    Sounds like your phone was hacked to work with any network. Doing the update re-locked it to the original carrier. All you can do now is contact the carrier it is locked to to see if they have an unlocking policy. Note that if it's AT&T they do not offer unlocking. otherwise find an un-activated sim for the original carrier and you can use it as an iPod.

  • I was updating the software on my iphone4. I got a message saying that it could not update. Now my iphone will not reboot. It only shows a pic to connect to itunes, but nothing is happening when i connect it.

    I was updating the software on my iphone4. I got a message saying that it could not update. Now my iphone will not reboot. It only shows a pic to connect to itunes, but nothing is happening when i connect it. How do I fix this?

    If you're not a developer then you really should not have upgraded.
    I'm unsure how you can fix this as you have already done a back-up on iOS 7 and apple don't support firmware downgrades.

  • I cant update my iphone and i tried going on my pc on itunes and clicking check for update button but it says that "itunes could not contact the iphone software update server because you are not connected to the internet".plz help

    i cant update my iphone and i tried going on my pc on itunes and clicking check for update button but it says that "itunes could not contact the iphone software update server because you are not connected to the internet". But i checked my internet on both my pc and iphone and tried again but it still says the same thing. plzz plzz help

    Were you definitely connected to the internet at the time? If you don't have iOS 5 on your iPhone then the only way to update it would be via iTunes, once updated to the latest version of iOS you'll be able to update your iPhone without connecting to iTunes "over-the-air".
    Before updating however it goes without saying to Backup your iPhone, this should happen by default upon connecting your iPhone to iTunes.
    Regards,
    Steve

  • TS1567 its denied, it says that "windows could not start the apple mobile service on Local Computer"?

    its denied, it says that "windows could not start the apple mobile service on Local Computer"? What do I have to do?

    http://support.apple.com/kb/TS1567

  • Im trying to burn an iDVD and its saying that there is not enough free disk space for encoding the remaining assets.

    Im trying to burn an iDVD and its saying that there is not enough free disk space for encoding the remaining assets. My main hard drive only has a few hundred Mb left on it so i bought a 1 Tb external hard drive and want to know how to make iDVD use the space on the external hard drive instead trying to use the main hard drive. Any help would be awesome! thanks

    Hi
    Yes - This is important.
    Free Space - Must be on the Start-Up (Mac OS) hard disk and can not be used on any other.
    My safe level is a minimum of 25Gb free space - to let iDVD and Mac OS run OK.
    This is due to that Mac OS X is in reality UNIX and there by needs lot's of temporary space for temp. files and so does the application iDVD. And this can not be addressed elsewhere.
    So to free up space - one thing is to move iMovie Events to an external hard disk BUT THIS MUST BE DONE Right Else all can be lost ! !
    • Never move or adjust any folders Named - iMovie Events or iMovie Projects - on Desktop/Finder - links will breake and can be hard to impossibly to heal. ALL movings must be done within iMovie Application (it goes for iMovie'08 to 11)
    • External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted - UNIX/DOS/FAT32/Mac OS Exchange will NOT WORK FOR VIDEO - nearly everything else BUT NOT VIDEO.
    Yours Bengt W

  • HT5625 My daughter and I were both on same Apple ID. We are trying to change hers but when we do, it says her email is already associated with an Apple ID but when we try to get the password, it says that it could not be verified. How do we correct this?

    My daughter and I were both on same Apple ID. We are trying to change hers but when we do, it says her email is already associated with an Apple ID but when we try to get the password, it says that it could not be verified. How do we correct this?

    Not from your end. Click here and ask the iTunes Store staff for assistance.
    (126716)

  • I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod.  This is the first time trying to backup.

    I have the current version of itunes, but when I go to update my ipod, I am getting an error message that says that it could not back up because the backup was corrupt or not compatible with the iPod.  This is the first time trying to backup the iPod. I have authorized my computer.  Still no luck.

    Go to iTunes>Preferences>Devices and select the iPod backjp and click on delete and try again.
    Also
    - Reboot the computer
    - Try another cable
    - Try another USB port

  • I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

    I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

    See #C12 in Time Machine - Troubleshooting

  • I have an iPod Nano 7th generation, and I keep getting an error saying that iTunes could not recognize my device. I have tried nearly everything,except I don't have admin rights on the computer, and really need help.

    I've tried a lot to get it to work, even using a new charger and putting it into Disk Mode. I really need help. Can anyone give me some advice? Thanks.

    Hi Dawson777,
    Thanks for visiting Apple Support Communities.
    It sounds like you're receiving the message "An iPod has been detected, but it could not be identified properly" when you connect your iPod nano to your PC. You have tried some good troubleshooting steps already, and you may want to review the additional steps in this article:
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/ts3218
    Best Regards,
    Jeremy

  • I was trying to update my garageband app and once the app fully downloads it says that it could not install and to check my internet connection. I restarted my internet, turned it off and on, restarted my computer, and nothing works what do i do

    I was trying to update my garageband app and once the app fully downloads it says that it could not install and to check my internet connection. I restarted my internet, turned it off and on, restarted my computer, deleted the app and downloaded it again and the same thing happened every time. What should I do?

    Do you have any firewalls or antivirus software active (e.g. Little Snitch), that could prevent the installer from contacting the Apple Servers? If yes, turn them off.  Also, disable the Energy saver, to prevent the Mac from falling asleep and causing time outs.
    Sometimes it will help, to run the installer in Safe Mode, see:  Mac OS X: What is Safe Boot, Safe Mode?

  • I can't run Itunes! After installing Itunes, I receive a message saying that Windows could not verify Apple's digital signature and it closes.

    Pls HELP me! I can"t install it Itunes on any of my computers. After downloading it ( Run now or Saving it) it will no run because I keep receiving a message saying that Windows can not open this file because it could not verify Apple's Digital Signature. I have changed my internet security settings to allow downloads from unverified websites but it will not allow me to run Itunes. I had an older version of Itunes so I tried to install the update and it wouldn't work because so the same message about not being able to verify the digital signature.  I uninstalled Itunes and Quicktime and all other Apple programs on my system. Then I tried to download it again... no luck the same message came up again. I then went to my other computer that NEVER HAD ANY APPLE software on it and tried to download Itunes. It gave me the same message. Please help me, I'm going crazy tring to figure this out.

    I had this same issue occur today during update, searched and finally tracked to problem with windows registry. Used online version of windows registry tool "Fix It" (can also download portable version for offline check. I selected Apple updater utility from list to fix and it did it's thing. Returned to my downloaded 10 iTunes adn isntalled perfectly fine.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Good luck. Worked for me back up and running.

  • It says that it could not backup because the backup was corrupt or not compatible with the iphone. What should I do?

    As I'm attempting to upload my Iphone 4s to the new ios6 a error message pops up and says that my backup was corrupt and I need to delete the backup for this phone and try again. What should I do to accomplish that?

    Mac:  ~/Library/Application Support/MobileSync/Backup/
    Windows XP:  \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
    Windows Vista and Windows 7:  \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.
    Delete the entire Backup folder if there is anything at all in it.

  • HT4623 My computer says that iTunes could not connect to the iTunes store.  My internet connection is fine.  How can I remedy this?

    My iphone 4 has "died" - looks completely black, won't seem to recharge, can't turn it on or off.  It does hum when I change from silent to non-silent.  I have been able to back it up, and download any photos off it.
    Before it died it ran out of battery really fast - which is not like it, but I've had it on the recharger now for over 10 hours.  No go.
    Before I take it to the genius bar I want to update to the latest software.  7.0.4 is recommended in iTunes.
    But when I try to update it iTunes says "Itunes could not connect to the iTunes Store"
    After reading some information about updating to IOS 7.0.4 I might be better to wait till the genius bar?  Athough they might send me home again with no phone which I don't appreciate!

    Thanks ckuan, that has at least got it opening and "looking likely".  I had tried that, but perhaps not holding those two buttons for long enough...
    It says no SIM card and is very slow.  Have reinserted sim a few times and now registering sim.  The screen where you have to enter your password to unlock the sim was 'patchy', not clearly showing.  (e.g. the circles around the numbers seem to be coloured, not the usual plain white circles around the numbers/letters).  Never seen that before.
    Battery showing as full.  I'll now and upgrade my software
    Thanks very much for your help

  • Firefox reset completely, attempted to restore old Firefox data, will not open saying that profile could not be loaded.

    Hello,
    When returning to my computer, I attempted to open Firefox and received a prompt to either start Firefox in safe mode or reset it. I tried safe mode at first then proceeded to reset it as well. Losing all of my add-ons/extensions/etc, I tried to solve the problem by restoring my profile with a folder that appeared on my desktop titled "Old Firefox Data". After following instructions to restore my profile, a window now pops up saying that my profile could not be loaded and Firefox just does not open at all. Is there anyway to recover my old profile? I tried following another suggested method but when searing for my profile through the files, it could not be found.
    Thank you!

    '''https://support.mozilla.org/en-US/kb/recovering-important-data-from-an-old-profile'''
    Recovering important data from an old profile
    If you've had to create a new Firefox profile, this article will explain how to recover information like bookmarks, history and passwords from an old one.

Maybe you are looking for

  • How to set default value for drop down box in jsf

    Hi, Can anyone help me to set the default value in drop down box using <af:selectManyChoice> ? As I know there is an unselectedLabel attribute in <af:selectOneChoice> but not valid attribute for <af:selectManyChoice>. Any help must be appreciated. Re

  • Error while activating PM Business Content DSO 0PM_DS01

    I am trying to activate the Business Content for PM (Plant Maintenance). I wasable to activate the cubes without any problem. But when I tried activating the DSO 0PM_DS01, the installation is failing while activating the DSO with the message. "You ar

  • How to install WebFlow Navigation Manager

    Can any one help me please. I have copied the wfnm.jar file into tomcat 5.5 bin directory. I wanted to confirm if iam doing right thing to use the WebFlow Navigation Managerframe work. Thank you. Any reply will be appreciated.

  • Convert xml to pdf?

    hi everyone! From my jsp, i can generate the xml file that i need to display in PDF.. i am really new to java.. ive read that i may use big faceless report generator to convert it to pdf but i cant get the desired result. maybe i am missing some part

  • Standy controlfile

    Hai primary database name is orcl and standby database name is stby i create a standby controlfile and after that i started the standby database ,put the database in nomount stage and i tried to mount the stanby controlfile since i was creating the s