My iphone did't connect to itunes ?
i want a help me to connect my iphone to my itunes ..
Do you have the latest version of "iTunes for Windows" downloaded and installed on your PC? You need to.
Hope this helps
Similar Messages
-
i unknownly deleted photos from my iphone 4,version 4.3.5,i dont have icloud and did not connected to itunes before deleting the pics,how can i recover those photos?
you cannot recover those photos if you didn't perform a backup of the iPhone 4
-
My iphone can not connect to itunes anymore. It says an unknown error occured (oxe8000001)
My iphone will ot connect to itunes, It says an unknown error occured (oxe8000001). It also said before it disappeared that it did not have the disks but has worked perfectly for over a month.
Now I found this answer in another thread:
ckuan
Re: my i phone will not connect to i store
Jan 14, 2012 12:42 AM (in response to wmadchef)
Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears)
Go to Settings > Store > Apple ID> Sign out then sign in again.
It seems to work
I still get the message (can not connect to iTunes Store) at some updates. But then I can click ok and it updates anyway. Hopefully this can help others with the same problem as well! -
HT1212 "iphone is disabled, connect to itunes". I cannot get anything to work. Help!
I have tried to restore my iphone and nothing works! It starts the process for about 15 minutes then the phone goes back to the message "iphone is disabled, connect to itunes". I cannot get anything to work. Help! I am so frustrated with our iphones, that I am ready to switch to different phones for my entire family. Please help!!!
Did you check your security software settings, to make sure iTunes can contact Apple servers during the restore process?
iTunes: Troubleshooting security software issues -
HT1430 Iphone is disabled connect to itunes, how to unlock my passcode?
I can't open my iPhone with my new passcode. It says: iPhone is disabled connect to itunes.
In the start of your question you said that the iPhone screen was locked with the text ‘‘iPhone is disabled connect to itunes’’. You had no way possible to even enter a code even if did have a correct code.
You were in effect locked out.
BUT after AndreweBens suggestion your screen did change to... SIM Locked. Insert a valid SIM with no PIN lock to activate iPhone. with a large button saying Unlock.
After pressing Unlock i get a screen that says...
Enter PIN 3 attempts remaining.
So.... IF you now can remember your pin, write it in here now.
IF you can not wremember the old code, then write anything in till it locks again.
once locked again, you should be able to enter your PUK code and get in. but whats your PUK code and where did you keep it? this you can get from your telephone company i think.
I hope this helps
its a bit tricky to remember correctly what the screens say in this situation but i think i am right in saying it goas like this.
once in you can then restore from your back up. urrrgh i think. -
trying to activate my iphone 5. when connected to itunes its says i need version 10.7. but when i try to update, it says that im current at 10.6.3.
iTunes version 10.7 requires at least Mac OS X version 10.6.8 if you're running a Mac, or Windows XP Service Pack 2 or later if you're running Windows.
Is your computer up-to-date enough for iTunes 10.7? -
Get message on iPhone 4S, "Cannot connect to iTunes Store." How can I access the iTunes Store?
I get a Message on iPhone 4S, "Cannot Connect to iTunes Store." How can I access iTunes Store? Yes, I am WiFi connected.
Well folks I finally got my "can't connect to iTunes" issues fixed. Seems that there was an unauthorized change to my email address and account therefore not allowing mr to connect to iTunes.
Here is how I got it fixed.
1. Contacted iTunes store support
2. Followed their instructions and replyed with the following info:
An order number from one of my purchases
Last 4 digits of the c.c. Used for the iTunes store acct
Answer to one of my security questions
And 2 items from this list.
Birthdate
Billing address for Acct
Phone number on acct
It was after all of this that they saw that someone had made an account modification back in February when the issue began. Seems they changed my email address just slightly and that is what kept me from being able to sign in and not a password issue. This was likely due to a phishing email that came out in conjunction with iCloud asking users to change their passwords to a more secure form by adding a capital and number.
To get all of this cleared up it took about 4 days as we emailed back and forth. I also needed a seperate email address they could use to send me info. Once they determined the issues and went to get them fixed by changing the email address associated with the acct and I created a new password I was able to access iTunes with no issues and even my previously thought lost acct balance was there.
Hope this helps
Crash -
My iphone 3gs will no longer let me try passcodes and it only says "Iphone is disabled connect to itunes" well, when I connect it to my laptop, itunes says "could not connect to phone because it is locked with a passcode. you must enter your passcode on the iPhone before it can be used with iTunes" Please help!!! I have tried resetting it and all the tricks I know. Nothing works. Thanks
You will have to restore it from Recovery Mode: http://support.apple.com/kb/HT1808
-
My iphone 5c says connect to itunes. It won't update/restore; error message (27) comes up. I also haven't backed the phone up since last year. HELP.
Hi there owain11,
It looks like that particular error may be realted to a hardware issue. Take a look at the article below for more information.
Resolve iOS update and restore errors
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
-Griff W. -
I want to back up an Iphone 3G and put all the content into Iphone 4. After I have backed up the Ipone 3G and then when Iphone 4 is connected to Itunes I do not get an Option to restore back up from Iphone 3G. The only devive is see in the drop down list is my Iphone 4. The IOS on Iphone 3G is 4.2.1 and on Iphone 4 is 4.1.
Please share if anyone has any solution to such a problem.You will first have to update your iPhone 4 in order to restore it from the backup of your 3G. Follow the directions here:
http://support.apple.com/kb/HT4972
This is an erase/restore deal, so make sure all of your data is on your computer before you begin. iOS 6.1.2 will be installed on your iPhone 4.
Once done, on your iPhone 4: Settings>General>Reset>Erase All Content & Settings. You'll now be able to restore your 3G backup to your iPhone 4. -
Iphone 4s disabled, connect to itunes not working
My mother in law gave my son her iphone 4s, however she left the password on it. My son tried entering random number (instead of asking what the code was), and now the iphone is locked with message "iphone is disabled connect to itunes". I've tried resetting and restarting the phone with no luck. It was never connected to itunes before, she didn't use icloud, and she never had it set to find her iphone so those options are out. I've tried putting it in recovery mode whole connected to itunes, downloaded the updates, and all looks great, until i get a message that it can not finish as iphone is passlocked. I'm stuck in a never-ending loop. Can I fix it from home or must I drive all the way to the apple store? Thanks
Read: iOS: Forgot passcode or device disabled and use the info in the Use Recovery Mode section.
-
my iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?
Place the device in DFU mode and restore.
-
my iphone says 'iphone is disabled connect to itunes' and when i do connect it, it says 'iphone could not connect to itunes because it is locked with a password and you need to unlock it but it doesnt let me as it is diabled???????
hi, may i know how to restore and put it on recovery mode??
as I faced the same problem as you now...
Thanks -
Hi,
My iphone has locked me out and says iphone is disabled connect to itunes. but my itunes wont connect with my iphone. i've tried everything i can think of and my phone is still locked and i cant sync it with itunes. what else can i do??While connected to iTunes, try...
http://support.apple.com/kb/HT1808 -
iPhone says "cannot connect to iTunes" I am hooked up to wifi and I keep getting this error... Any ideas?
Hi ...
Try this support article > Can't connect to the iTunes Store
Maybe you are looking for
-
Hi my oracle application server logs became very huge in size i wanted delete them if i remove the logs and save it is prompting check file and path is there any other way
-
I've ran into this problem a few times now with dialogs, I'm guessing it's something that if I explain someone will know exactly what I'm doing.wrong. Basically when I open a dialog and hit the "cancel" button which calls setVisible(false); it works
-
How to use Google Maps in Business Objects Dashboard Designer 4.0
Hi All, I got one requirement, in that I need to disply country wise information. For this I am planning to use google MAPS. Could you please help on this issue Thanks in Advance
-
Create vertual package in SCCM 2012
I Need to create a virtual (App-v package) that I sequenced in sccm 2012. I remember in sccm 2007 there was an option (Create virtual package) I don't see that here whats the procedure for creating virtual package\application in sccm 2012 Thanks
-
Wily Enterprise Manager 8 connection to SM Ehp1 failed
Hi guys ( SM eph1 sps18, x64 jdk_ 17,Wily Enterprise Manager 8 ) Have installed Wily Enterprise Manager 8 successfully. Its up and running with out errors. when i go to Diagnostics Setup -- Managed Systems--Introscope Agent Unable to find the wily e