My Iphone died on me yesterday. It still had plenty of charge showing. It now won't turn on and doesn't acknowledge being plugged in to charge. Its simply dead. What can I do?

My Iphone died on me yesterday. It still had plenty of charge showing. It now won't turn on and doesn't acknowledge being plugged in to charge. Its simply dead. What can I do?

This is exactly what has happened with me. I feel so ****** off. Apparently this is pretty common. I am in the works to get a content writer job for one of the most widely read technology blogs, and guess what my first article would be on?

Similar Messages

  • TS3988 iLOST OR MISPLACED MY Iphone and i think it is in my house but iy is dead what can i do?

    I lost my i phone last night between my house and drug store i have gone there many times to find it and called them and no lucki have searched my car and my house and nothing the battery is most likey dead what can i do?

    Welcome to the Apple Community.
    If the device is unable to connect to a cellular or wifi network for whatever reason then all you can do is physically look for it.
    You should also change the passwords on any Apple ID's you have in use on the device. If the phone is suspected to have been stolen, report it to the Police (if you have insurance ask for a crime reference number). You should also contact your provider to have your number locked.

  • I upgraded my iphone and all of my music and apps disappeard.  they show up as purchased on my phone and computer but i cant load them back on my phone.  what can i do?

    I upgraded my iphone and all of my music and apps dissapeared.  They show up as purchased but I am not able to put them back on my phone.  What should I do?

    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I have an ipod touch newest generation. Downloaded ios8 yesterday. my ipod was working fine twenty min ago now it wont turn on and it was fully charged?!

    I have the ipod touch newest edition and downloaded ios8 on it yesterday. It worked great no issues all day and today. twenty minutes ago i was in my car listening to music played fine. Got home and put my ipod in my purse. When i got back in the house. My ipod wont turn on. the home button wont do anything the unlock button either. my ipod was charged and i have tried plugging it into the outlet and computer and it just wont do anything!? Is any one else having this issue? or what am i doing wrong?

    Hi kdbenton,
    If your iPod touch will not power on, I would suggest that you try to restart using the steps in this article - 
    Turn your iOS device off and on (restart) and reset
    Should it remain unresponsive, troubleshoot using the steps in this article -
    iOS: Not responding or does not turn on
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S.

    I had already update mi new factory unlocked iPhone 4S to iOS 5.1.1 and I still having problems with "invalid sim". I'm from Argentina and here we don't have official service. PLEASE HELP ME, WHAT CAN I DO??? In Argentina is too expensive an iPhone 4S. Please I need help to continue believing in Apple. Thanks a lot. If anybody speak spanish better.  

    Was it purchased from an official Apple Store, not a reseller?  Only Apple Stores sell official factory unlocked phones.  The others sell hacked to unlock phones, and the unlocking is unstable.
    Try these steps, as needed:
    1. Reset phone - press both home and on/off buttons for at least 10 seconds until the Apple logo appears.
    2. Settings > General > Reset > Reset Network Settings.
    3. Replace SIM card (and reset network settings again)
    4. Restore Phone in iTunes using a backup
    5. Restore in iTunes as new, without using a backup

  • Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? by stephenftlaud

    still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? bystephenftlaud

    Hi,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

  • Still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

    still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?

    Hi,
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2.

  • My iphone 5 stopped working, it won't turn on, and i tried charge it yesterday and today

    My iphone 5 stopped working it won't turn on, and i tried charge it yesterday and today

    Hey raphaccarvalho
    If your iPhone is not powering on, then check out the article below to see if you can get it to power back on. You will want to start at step 3 to try and reset it by holding the Sleep/Wake button and Home button for about 10 seconds and see if the Apple Logo comes up.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Regards,
    -Norm G.

  • I keep trying to restore my iphone 4s as there is some lag so i need to install 5.1.1 but it keeps telling me servers are temperarily down.      according to me it permanent     what can i do to fix this issue

    i keep trying to restore my iphone 4s as there is some lag so i need to install 5.1.1 but it keeps telling me servers are temperarily down.      according to me it permanent     what can i do to fix this issue

    Either your security software is blocking access to Apple's servers, or your computer was used at some time in the past to hack or jailbreak some iDevice (not necessarily the phone you are restoring), and your computer's network database has been corrupted. If you know this is the case edit your "hosts" file and remove all lines containing "gs.apple.com". If you are sure it is not the case temporarily disable your antivirus and firewall.

  • My iphone 4s won't turn on and it is in DFU mode, but my computer can read the device..... PLEASE HELP :((

    My iphone 4s won't turn on and it is in DFU mode, but my computer can read the device.... PLEASE HELP , and my iphone is not jailbroken

    http://www.youtube.com/watch?v=uuulql2u37U The title is "DFU Mode vs. Recovery mode - Which is Which? and How to Enter AND Exit (iphone, ipod, ipad) It helped me, Hopes it Helped you! Also you do not need to Restore! 

  • Plz i need your help , i updated my iphone 3G for ver6.0.1 but now its not work , what can i do ??

    Dear Sir/Mom
    now i updated my iphone 3G for the version 6.0.1 but now its not work , what can i do plz help me
    thank you

    What doesn't work?
    Has the iPhone been jailbroken?
    Do you have the app Cydia on your iPhone?

  • I have a US iPhone 3GS made in 2011. Now in the Philippines I had it unlocked. Now Internet is turned off and no technician can turn it on. I can only use Internet when I have WiFi access. Any ideas?

    I have a US iPhone 3GS made in 2011. Now in the Philippines I had it unlocked. Now Internet is turned off and no technician can turn it on. I can only use Internet when I have WiFi access. Any ideas?

    Please define "I had it unlocked".
    If it was not unlocked by AT&T, then it was hacked. Hacked and jailbroken phones can not be discussed here per the TOS.

  • I tried to update the software for my iPhone 4S. It froze, and now won't turn off, or on, or sync.  Any ideas on how to fix this?

    I tried to update the software for my iPhone 4S, 16 GB to the most recent version (8.1?).  I don't know what I was updating from, because I can't access that, but it was whatever was installed on it (I got it about a year ago, so probably 6.something). 
    It froze, and now won't turn off, or on, or sync with my macbook plus, which is what I have always sync'd it to.  (I backed it up and sync'd it right before I tried to update the software.)
    Since it originally froze almost 3 hours ago, it shows a white screen with the apple on it and a line underneath.  When I try to sync with my laptop, it says it needs me to enter a passcode on the phone, which I can't enter because the screen is frozen.  So I'm unable to access the iPhone portion of iTunes.
    I have tried to turn it off, with no luck.  I have tried rebooting my laptop and syncing, but I still get the same result.
    Does anyone know how to fix this?
    I really wanted to wait to update the software, but I was having internet connectivity issues for the past 3 weeks, and Sprint suggested updating the phone's software.
    Thanks in advance for your help!

    Hi NWL1,
    Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Thanks for using Apple Support Communities.
    Have a great day,
    Mario

  • After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?

    After forgetting the password for my iPhone, I am trying to restore it through iTunes, however, during the process, the phone keeps turning on and asking for the password, thus canceling the process. Any advice?

    Yes, you will still get the prompt.
    I meant reset then try the recovery mode restore again.
    You can also try DFU Mode.
    DFU (Device Firmware Update) Mode is different than Recovery Mode.
    DFU Mode is a special mode where the device can still interface with iTunes, yet it does not load the iBoot bootloader.
    DFU Mode:
    Plug your device into your computer.
    Turn off the device.
    Hold the Power button for 3 seconds
    Hold the Home button without releasing the Power button for 10 seconds
    Release the Power Button but keep holding the Home button
    Keep holding the Home button until you are alerted by iTunes saying that it has detected a device in Recovery Mode
          NOTE: Make sure the device screen is blank and no logos are present. Be patient, it make take several trys.

  • I downloaded the new software on my iphone 4 and it worked for a few hours and now won't turn on

    i downloaded the new software on my iphone 4 and it worked for a few hours and now won't turn on

    Reset, hold both home and power buttons until the iPhone begins to restart. If still nothing, connect to Wall Charger for 10 minutes, iPhone may turn ON itself. If still nothing keep on charger and Reset. It can take about 20 seconds of holding both buttons while on charger.

Maybe you are looking for