My iphone display suddenly magnified preventing use. HELP?
My iphone display suddenly became magnified to large scale preventing use of phone. I have attempted to go to settings w/o success.
Any suggestions?
THANKS very much for your reply and assistance.
Best Wishes,
Stephanie
Similar Messages
-
MY iphone 5 suddenly restarts while using
hey all my iphone 5 keeps restarting suddenly when using i have try to reset and start everything but it happens inmenntly. any ideas?
Hi kyawlin,
Thanks for visiting Apple Support Communities.
I recommend trying all of these steps if your iPhone is restarting unexpectedly:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy -
Unable to swiitch of iPhone, display is magnified
It is imposibele to answer / open the Iphone. Display is "magnified"
triple click with 3fingers on screen
-
Would appreciate any help today -- this is bizarre; but the icons on my iphone will not reduce in size and basically I cannot
use the phone - the screen will not respond to the usual things.....thanks VERY much!Double Tap the screen with three fingers...
Then go to Settings > General > Accessibility and make sure Zoom is turned Off.
http://support.apple.com/kb/ts3129 -
My iphone display suddenly turned black
Phone still ringing but the display is black, cannot answer.
Hi Karlsson99,
If you had an issue and your iPhone is no longer responding, you may find the following article helpful:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Regards,
- Brenden -
My iPhone has suddenly started sending emails in Courier New (rather than the standard Arial). They appear in Arial when I compose them, but turn to Courier new in the sent folder and when displayed to the recipient. I use Yahoo Mobile Mail. Help! How can I change the settings so that the sent emails go back to Arial? Thank you!
I'm not sure if it's a Yahoo Mobile mail or an iphone issue... have asked the Yahoo forum but no replies yet... Any help appreciated!
-
Can anyone help me display the calendar list using an iphone4 with iso 7.1.1? I have already tried tapping the magnifying glass and that doesn't work.
That icon allows for the calendar month to display with the appts for that month below. I want to see only the list of appointments without the month displaying. I use to be able to get that display but since the last update tapping the magnifiying glass doesn't work.
-
ipone 4s display suddenly doesn't work any more. most of the time i can't even unlock my iphone as it puts the numbers itself. and if i am lucky to unlock it opens apps and does everything else whenever my finger comes near the display without even touching it. I did reset and also updated my operating system. But the problem stills shows up... can anyone help please?
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
Hello My ipads Power button is not working properly when I press it once it shows option to turn off instead of locking and some other display problems like it suddenly lockes down or display disappears ...Please help. Thank You
Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?! -
My iphone 5 screen keeps suddenly magnifying
My AT&T iphone 5 screen keeps suddenly magnifying and I cannot easily get it to restart. Because everything is so huge I cannot get to the power off or unlock slider and the touchsreen barely responds, has anyone else seen anything like this? Someone said it was maybe connected to a new camera feature but I cannot find anything to change. It has all the latest updates and is only a month old.
Appreciate any help!It's possible you have zoom enabled and are inadvertently using a gesture to toggle it on
check your settings, go to settings > general > accessibility. Is zoom on? If you're not visually impaired, you'll most likely want to turn it off
If it was on, it's possible you were toggling the feature by double-tapping with three fingers on your screen at any point. When zoom is activated, the gestures of the phone change, even for normal navigation. You have to use 3 fingers to move around the screen when zoom is on. -
Hi All, I plugged my iPhone into my laptop and I was asked to upgrade my iTunes software. It took more than seven hours and just to be told that my SIM card does not appear to be supported. Since then I can not use my iPhone. I am lost plse help. Jam53
Every time I switch on the iPhone, the iTunes icon is displayed together with a USB icon and Emergency call message appears on the screen in many languages. When I touch the i symbol I get the following information IMEI: **** AND ICCID: ****
However, the iphone is visible in the Devices directory in iTunes. I changed my SIM card but still can not be recognized by the iPhone.
<Edited By Host>Do you mean when you say its locked to another carrier other then the one im using, that maybe my insurance sent me an iphone thats for a different network for example orange and not mine which is o2?
-
My T40 display (lcd) suddenly turns blank, any help
My T40 display (lcd) suddenly turns blank, any help Mo
Moderator Note; please update your profile with your correct country location as per the forum rules. Products, options and services vary from market to market. Knowing your location helps us help you
Message Edited by andyP on 07-12-2008 10:01 PMI'm afraid that you're not going to like what I'm about to write...
Your T40 has most likely become a victim of the infamous GPU failure that T4x/R5x with ATi graphics are infamous for, where the video card starts detaching itself from the motherboard as a result of heating/cooling cycles and/or physical stress on the chassis.
Re-flowing/re-balling the solder in the GPU area or motherboard replecement are your only choices.
Good luck and let us know.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
Hi! I've been using Goldmine contact management software for many years and syncing with Companion Link successfully, then ITunes to the IPhone. Suddenly, my IPhone is not recognized and won't sync. I see a message telling me to dock the phone? Any ideas? Thanks for any assist!
Hi Ken,
Dennis here from westport. I too am a goldmine user for many years and would love to know how you sync.
I am looking at a product called wmobile, but may be problematic on my current system.
thanks for any help... -
MY iPhone 5C suddenly stopped working. It wont connect to my Mac and repeatedly reboots from the apple Logo when plugged into the wall.
There is no water damage or anything. I got that checked at the Apple store. I also have Apple Care + but didnt let them give me a new one yet because I have photos on this that I have no yet backed up that are very important. They are the last photos I have with my grandfather. Can anyone help me. Please!If the phone shows the "connect to iTunes" screen, the data on the phone is most likely lost.
Connecting in recovery mode is your only chance to use the phone again, besides getting it serviced by Apple.
iOS: Unable to update or restore -
My Iphone 4 suddenly blackout and restart by itself. After that it reach the restore screen. Tried to do restore but it come out Error (9). Anyone can help?
I tried to restore in normal mode and DFU mode, both of it still give me error (9).
I tried using other cable and computer but it still the same.
Anyone out there having the same issue that can share?
Is this a hardware or software issue? My warranty already over and have to solve this problem by myself.
Please help.Did you check your security software settings?
Error 9: This error occurs when the device unexpectedly drops off the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
copied from Update and restore error messages on iPhone and iPod touch
Maybe you are looking for
-
Images are blurred in Library module
I am having some new issues when viewing images in the Library module. I have been using LR for quite sometime and this is the first time. I saw a thread somewhere here that maybe this might be a bug. Is that correct. Let me walk you through some of
-
Assistance installing Zen Xtra's softwa
Hi just got a Zen Xtra and I belei've the Cd is corrupt as so i cannot install the software to transfer music to my player. Please could someone help me with a link to the software that i will need (bearing in mind i cannot install anything of the cd
-
Opening the same link in Dolphin browser works OK and it used to work in FF prior to the April 3rd upgrade to V20. I have tried clearing cache, cookies etc. and also re-installing the Webex app.
-
Hi, I define ITEM NO as main infoobject and compound key fields as Branch, Location, lotno, and fiscal year. When I select ITEM NO in the report I am getting all key field values.For example sample data: BRAN1/LOC1/LOT1/200604/ITEM01 but I want only
-
Start XNA applications on Azure VM
I run my app that uses XNA on vm (OS -Win7), and if i try to move or resize (when app initializing xna) window desktop (connect via rdp), i get error "Could not find a graphics device that supports the XNA Framework Reach profile". Can you help me?