My Iphone does not want to charge with laptop. What can I do?

Hello,
Last August I bought Iphone 4S and i am currently in another country for the summer and I wont be back until september which meqns my 1 year waranty is over and my Iphone is expreincing problems with speker sound and it wont charge with laptop. I am afraid that if I go to a local apple store they wont accept the Iphone due to the waranty. So what can I do? please help and thank you.

Does the iPhone charge when connected to the power adaptor?
Are you connecting the iPhone direct to a USB port on the computer - not being connected to a USB hub of any kind?
The local Apple Store can and will run a hardware diagnostic on the iPhone to determine if this is caused by a hardware problem at no charge regardless if the iPhone is no longer under warranty and purchased in another country.

Similar Messages

  • I have just installed mavericks OS.My epson printer does not want to work with it .What can i do?

    I HAVE JUST INSTALLED MAVERICKS OS.IT APPEARS IT IS NOT COMPATIBLE WITH MY PRINTER WHICH IS AN EPSON WORKFORCE PRO WP-5630 SERIES 2.What can i do about this problem?

    Hello Baldy7,
    It sounds like after updating to Mac OS X 10.9 your printer is no longer working with the computer. U want to recommend these steps from the article named:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Contact the printer vendor or visit their website for further assistance.
    Additional Information
    Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB.  For more details, see this article.
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • Z10 does not want to charge with AC after update

    Hi, please can anyone help.  After the newest software update (Im now on 10.2.0.424 ) my Z10 does not charge if plugged into an wall socket.  I can only charge via my pc or laptop.  This is very annoying as I charge my phone at night time.  How do I fix this......
    Thank you
    Louise
    PS : How do I get into the battery settings ?

    It may have something to do with the update and it could also be the night time charging (not really recommended)
    Try a reset:   When powered on hold down the power button for 10 seconds.
    If it does not help post back, someone else may have another solution.
    Also consider the below if you do not find a solution.
    You can restore your phone to factory settings if you wish to see if it corrects your issue. Resetting to factory settings will wipe out all your data so you should save it first. To save all your stuff download and install BlackBerry Link on your computer from the link below. Resetting will not back-up the OS on your phone. Once you have downloaded and installed BlackBerry Link connect your phone to your computer and save your stuff. Once saved disconnect your phone from the computer.
    To reset your phone: tap the Settings App, scroll down and tap Security and Privacy, tap Security Wipe, tap the blank box and enter blackberry.
    Once Wiped reconnect your phone to your computer and install your stuff.
    http://us.blackberry.com/software/desktop/blackber​ry-link.html
    http://ca.blackberry.com/software/desktop/blackber​ry-link.html

  • Iphone 4 does not want to sync with my computer

    I Phone 4 s does not want to sync with my computer after I have installed new updated software on the phone. Just show's on phone that I need to connect cable to I tunes ? I have restarted my computer and installed updated I tunes. My security on computer has also been disabbled.

    If you're running Windows, try closing iTunes, then right-click on the iTunes icon and choose Run as Administrator.  Then try synching again.

  • My iphone does not receive electric charge, what I can do?

    my iphone does not receive electric charge, what I can do? the problem is the iphone, but i dont now why

    Hi daani94,
    If you are having charging issues with your iPhone, you may find the following articles helpful:
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/ht1476
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Regards,
    - Brenden

  • My ipod touch does not want to sync with itunes

    My ipod touch ( 4 th IOS 5 firmware 5.0.1  8gb ) does not want to sync with itunes on my computer while on another computer be synchronized
    HELP please !

    What?
    What do yo mean it does not want to sync?
    Are you trying to say it does sync with one computer but not with another????? If so, this is by design. All iDevices are designed to sync with one and only one computer.

  • HT4623 I'm trying to update my iPhone and I go to ``settings'' then ``general'' and at that point I should see ``software update.'' But it's simply not there, that line does not exist in my phone. What can I do?to look for the

    I'm trying to update my iPhone and I go to ``settings'' then ``general'' and at that point I should see ``software update.'' But it's simply not there, that line does not exist in my phone. What can I do?

    This featue is only available on iphone running ios 5 or later.
    Update as you always have, via itunes.
    Read the article you linked.  the entire article, not just the first part.
    iOS: How to update your iPhone, iPad, or iPod touch

  • Trying to install older version of photoshop elements on new windows 7 computer with internet explorer 11. Install program does not recognize windows explorer 11. What can I do

    trying to install older version of photoshop elements on new windows 7 computer with internet explorer 11. Install program does not recognize windows explorer 11. What can I do

    HI Bill,
    Did you set Internet Explorer as the default browser? If not the set it as the default. Check to see if you can do custom install
    Thanks
    Scott
    Here is the system req.
    Photoshop Elements 6.0
    Windows
    Intel Pentium 4, Pentium M, or Intel Centrino 1.3 GHz (or compatible) processor
    Microsoft Windows XP with Service Pack 2 or Windows Vista
    256 MB of RAM (512 MB recommended)
    1.5 GB of available hard-disk space
    Color monitor with 16-bit color video card
    1024 x 768 monitor resolution at 96 dpi or less
    Microsoft DirectX 9 compatible display driver
    CD-ROM drive
    Web features require Microsoft Internet Explorer 6, Netscape Navigator 7.0, or Mozilla Firefox 1.5
    Languages

  • I try to install my creative suite master collection (student version) on my new mac. the point is that when I want to write the product key. The computer does not accept the number 3. so what can I do ?

    I try to install my creative suite master collection (student version) on my new mac. the point is that when I want to write the product key. The computer does not accept the number 3. so what can I do ?

    Can you use the number 3 key elsewhere?
    [topic moved to Downloading, Installing, Setting Up forum]

  • My iphone 5 don't want to connect with itunes, what can I do... I have an itune reedem card with a balance $15.05 but I can buy anything

    My iphone 5 don't want to connect with itunes, what can I do... I have an itune reedem card with a balance $15.05 but I can buy anything

    It seems as though you are describing two different things, unless you are trying to say that you cannot connect to the iTunes Store on through the phone. If that is correct, suggest you try and do a search, the question has been asked a great deal and answers can be found. Maybe even try and describe the error message you are seeing when trying to connect.

  • HT2479 iMovie stays on desktop but does not want to open up so I can use it, any thoughts??

    iMovie stays on desktop but does not want to open up so I can use it, any thoughts??

    Hi,
    I had this problem. Solution was to move mouse over taskbar icon. When Firefox displays small icon right click this and select maximise window !!! I think somehow Firefox got minimised to the taskbar and would not reopen as a full window. i.e it when you clicked the taskbar icon it would pop up and then pop back down to the taskbar again !!
    Hope this helps.

  • I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

    I did a recent update and now when I try to use FaceTime it does not take my apple id. What can I do?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
    http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Troubleshooting iMessage Issues: Some Useful Tips You Should Try
    http://www.igeeksblog.com/troubleshooting-imessage-issues/
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    How to Block Someone on FaceTime
    http://www.ehow.com/how_10033185_block-someone-facetime.html
    My Facetime Doesn't Ring
    https://discussions.apple.com/message/19087457
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

  • My external LaCie drive gets an error message "the disc you inserted was not readable by this computer." The only options offered are "ignore" or "eject" Disk Utility sees the disc but does not give a repair option. What can I do?

    When I plug in my external LaCie drive I get an error message "the disc you inserted was not readable by this computer."
    The only options offered are "ignore" or "eject"
    Disk Utility sees the disc but does not give a repair option.
    What can I do?

    The good thing about mac-centric resellers such as OWC, is they have people on staff that can answer questions without you buying things first. They also have how-to information, and instructions are included in many of their products. I saw a link to watch a DIY video in one of their pages; an example of a RAID (with its own power supply) is shown on their drives page. Also a few in there, with no power supplies, for less money.
    If I were looking to backup and perhaps also have a partition for a system clone, I'd consider something like one of these: http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    Some ideas on the RAID backup methods appear in google search, some of the pages are ideas and concepts; and the better ones also warn about using RAID for the only backup plan.
    Oh, OWC has live chat. Haven't tried it, nor have I bought anything from them. I have what appears to be two products from them, but have not used either. One is in a box as-new, but has only USB2.0 ports & my Macs needed FW400/800. It has been said their RAM is a good way to upgrade, too. But I can't confirm!
    A 'RAID-ready' unit for backup may be more versatile for just that, but I have not checked into these details. I use single HDDs in powered enclosures, and usually manually make backup clones to FW drives, of bootable OS X systems. Some of the OWC raid-ready use eSATA ports so that may not be viable for a computer without them.
    The unused in-box external drive I have is like the base model in the link above. However mine is USB2.0 (maybe) and won't boot my older Macs due to hardware variance; and my preference would be for FireWire options, these models do offer that. But the one I have does not. Dual 500GB HDDs, and they could be used in tandem as a RAID. That would be a choice set up in software. I'm not sure and not interested enough to read up just now.
    My backup method is not automatic, or a moving backup plan, if I don't get a move-on and make full system clones. I do make copies of photos and documents the manual way, to USB external drives; and occasionally backup to DVD or CD media. And USB flash, that helps to move files between computers without need to use file sharing via wi-fi. {Like Why fly? Walking is better exercise unless one is a bird. Squawk!}
    https://www.google.com/#q=raid+backup+mac
    Depending on the ports in your Mac, you may be able to use other cables to attach between a backup or externally enclosed hard disk drive with multiple partition and bootable clone in one of them. Not sure about the Thunderbolt, and where that is the main port, adapters are required to access other devices, as allowed.
    Anyway, I am going on and on, yet not really saying anything.
    My ideas would not be all that interesting to follow as a backup
    plan when matching available newer hardware to task, but you
    can get some into better ideas if you are not in a rush. Get a
    good setup and then look into more an betterer stuff.
    Good luck & happy computing!

  • My current Camera Raw 5.7 for Photoshop CS4 Extended does not support Canon EOS 6D. What can I do? Will there be a Photoshop Camera RAW for that?

    My current Camera Raw 5.7 for Photoshop CS4 Extended does not support Canon EOS 6D. What can I do? Will there be a Photoshop Camera RAW for that?

    You would need Camera Raw 7.3 or later to open those files. Adobe is not going to update CS4. You can either get a newer version of Photoshop that comes with a current version of Camera Raw, or you can use the DNG converter to save your files down to the ACR version that works with CS4.

  • Icloud does not accept new Apple ID. What can I do to get it to accept.

    Icloud does not accept new Apple ID. What can I do to get it to accept.

    Please try logging in with your current Apple ID here in order to test: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/directToSignIn?loc alang=en_US
    If your new ID doesn't work try logging in with your old details as maybe the change didn't work as first thought?
    Regards,
    Steve

Maybe you are looking for

  • Error while creating Temse Object (W2 form in PU19)

    Team, When i try to create the w2 in PU19, i am getting the error statingthat ERROR WHILE CREATING TEMSE OBJECT HRLUS01A100900109026.Please advise me in this.(We are maintaining the HRSP-42).It is veryurgent,Expecting your valuable Guidance.Points su

  • Report running fine via se38 , but not with tcode.

    I had made a alv report, and had assinged TCODE. When running via tcode > in selection screen i had given all the input data in selection fields,>After that when clicking  the execution button> ITS GOING BACK TO SAP SCREEN. BUT. SAME report when runn

  • Workaround for 60fps to 25fps?

    Is there a workaround for footage thats in 60p to make it 25p or less. I shoot with the Rebel T2i and before I did it with Cinema Tools.

  • Importing Scanned Pics Into IMovie

    I imported some of my student's work into IMovie. The scanned work was cropped during the IMovie import. Part of the work is cut off. Does anyone else have this problem? What can be done to keep my scanned work intact in my IMovie?? Thanks for your h

  • Drop Zones - manipulating media

    Is there a way for me to manipulate media after I've dragged it to a Drop Zone? I'd like to scale, crop and reposition media I'm added to a Drop Zone, but I can't find a way to to that. I see in the Image Inspector I can Fit or Center the media. I've