My iphone doesn't work after changing cards from us to polish ones

Hi, I've got a problem. I took my iphone 5s from usa to poland i put polish card and everything was ok but then i changed cards twice and my iphone is blocked now. It says it is not the fault of the phone but i should install the card SIM which is serving but when i put an American card it is also the same i hope you can help me to deal with it.

Hello emilcia,
Thanks for using Apple Support Communities.
Did you unlock your iPhone? The following support article explains about the process of unlocking:
iPhone: About unlocking
http://support.apple.com/kb/HT5014
Take care,
Alex H.

Similar Messages

HT4623 Landscape feature on iphone doesn't work after OS 7 download. HELP.

The landscape feature on iphone doesn't work after OS 7 download. How do i fix it?!

Swipe up from the bottom. Control center should cover about 2/3 of the screen. At the top right of control center is a circle with a lock in it. If that lock is closed, tap to open it.

IMessage doesn't work after changing the sim. New number isn't even recognised.

I changed my sim from a German to a French one and the card is already active and calls are possible, but iMessage doesn't work. The new number is not recognised and iMessage cannot be activated.
I tried to switch it off and and and I reset the network, but nothing. I even removed the card a few times, but no change.
How can I make it work?

Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
On my SD TV... Notice the black bars on the top and bottom. Once I go in and out of the guide the black bars are gone. I have reported this but if you are confirming the issue I will report it again.
jaytee1019 wrote:
I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

Wrt300n- wireless doesn't work after changing default IP scheme

When I change the 192.168.1.0 default network scheme my wireless connection doesn't work to the internet I can get to the router's configuration ( I need to change for VPN reasons) The LAN connections work fine. Any ideas or settings that I can look at.

Reset your router by holding down the reset button on the back for 30 sec. This should get you on the net but you will need to configure your router wireless settings to secure it. Good Luck!

IPhone doesn't work after installing upgrade

Upgraded iPhone and now it doesn't work. I have a black screen with the apple logo and white line - that's all. It doesn't respond to even the power button.

Try resetting the App Store and Clearing Cookies.
Reset Learned from Old Toad
App Store support. There is troubleshooting and a contact link.
Support
Time Machine
Inherit a Backup
Inherit a Backup (2)

Incoming email doesn't work after changing to iCloud

After changing to iCloud, my email cannot receive mail any more, but I can still send.

Hello,
I understand, we need to know what version of Mac OS X your PowerBook is running in order to assist you.
If you don't know you can go to the Apple logo on the top left and click 'About This Mac'
It will tell you what Mac version your PowerBook is running, for example Mac OS X 10.4
When you say emails icon, do you also mean the 'Mail' that has the icon as a stamp?

Printing PDDoc with AFExecuteThisScript() doesn't work after an upgrade from SDK 5 to SDK8

Hello,
I have made an upgrade of my plug-in which was developed with the Acrobat 5 SDK. I upgrade it to Acrobat 8 SDK and my print function doesn't work anymore.
Actually I print my document using a javascript trusted function instead the function provided by the C++ library for internal reason.
Here below is the code used to print my document :
char szJavaPrint[6000];
sprintf(szJavaPrint,
"pp = this.getPrintParams(); \r\n"
// fill pp with parameters
"pp.interactive = pp.constants.interactionLevel.silent; \r\n"
"\r\n"
"this.trustedPrint(this, pp);"
PDDoc pdDoc = AVDocGetPDDoc(avDoc);
AFExecuteThisScript(pdDoc, szJavaPrint, NULL);
It was working with the Acrobat 5 SDK but the print seems to have no effect using the Acrobat 8 SDK. I know that there is a change between Acrobat 5 and 8 concerning the Character Set (currently I set the Character Set to "Not Set" in the Configuration Properties of the project) but I don't think that my problem comes from the Character Set.
All ideas to resolve this problem are welcome.
Kind regards,
Joe

See what happens if you remove the "setting of interactive to silent"...
There is a restriction on silent printing in Acrobat, but I would not have expected that to be passed into this method - but it could have been overlooked and be a bug.
Also, I don't recall a trustedPrint() method in Acrobat JS - check the documentation for the correct name of this function...

HP Printer doesn't work after changing computers

After a recent change to a new ASUS computer running Windows 7, I cannot get the Deskjet to print. It was working perfectly before the changeover. I have downloaded HP Print and Scan Doctor. I am told that the driver is already in the Windows 7 software, however the Doctor reports that " the full software solution for your product is not installed on this computer".
I have tried disconnecting and reconnecting the USB link, but with no success. (he USB cable is linked via a cord-mounted
25 pinDIP connector to the Deskjet.
It seems that no communication is happening between computer and printer.
I'd much appreciate some helpful comment!
Thanks
Rodney

Thank you for your question re my DeskJet710C printing problem.
Yes there is a problem listed in my Device Manager Universal Serial Bus Controllers.
It mentions an Unknown Device with Port_#0002.Hub_#0004. It says no driver files are loaded or have been required for this device. I have tried changing this Port to 0001 without success.
There is a similar port called USB Printing Support listed with the Device Manager, giving a Driver File:
C:\Windows\System 32\DRIVERS\usbprint.sys ..... but this doesn't seem to exist on my current system.
I have tried downloading it from the net, but without success - I guess it needs installing on the Registry (?).
Should I use something like RegCure to get this installed?
Many thanks
Rodney

Firefox doesn't work after changing networks.

I take my laptop to work and use it at home, with different networks (VPN at home) and I always put my laptop to sleep. The firefox window doesn't update when I switch networks and if I refresh, it keeps uploading and eventually says "timed out". I have to restart firefox to make it work.

See --> [https://support.mozilla.com/en-US/kb/Cannot%20connect%20after%20upgrading%20Firefox Cannot connect after upgrading to Firefox]
Links to instructions for settings for '''''McAfee Internet Security 2009 or 2010''''' and '''''McAfee Security Center (McAfee Total Protection, McAfee AntiVirus, or McAfee Internet Security 2011)''''' can be found on this page (scroll down to list of firewall applications) --> [[Firewalls]]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

3D Doesn't work after changing the LCD Screen

Hi, I had a problem with my Toshiba Qosmio F755-3D350 the LCD screen broke and I have to replace it with a new screen.
The new screen is the same model : B156HB01 V.0 from Au electronics, that the original screen on my laptop had.
everything works fine the resolution, the camera but when it comes the 3D it doesnt work the Leds on the web camera doesn't turn on and activate the wiggle stereoscopy.
How can i activate again the 3D or Where is the problem?
Thanks.

Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
On my SD TV... Notice the black bars on the top and bottom. Once I go in and out of the guide the black bars are gone. I have reported this but if you are confirming the issue I will report it again.
jaytee1019 wrote:
I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

IPhone doesn't work after 1.1.3 update

I installed the iPhone 1.1.3 update two nights ago. After installing I had no phone service, wi-fi or bluetooth. Everything else on the phone seemed to be working. Connecting to iTunes resulted in an error saying the phone may be damaged and I should take it to an Apple store.
The guy at the Apple store reset or restored the phone. Now the screen just shows the USB pointing to an iTunes logo and the phone does nothing anymore - almost like it needs to be reactivated. And connecting to iTunes gives the same message that it's damaged.

Just adding in that the same thing just happened to me and so my phone is out of action until this is solved. I reset the phone and tried to restore within iTunes, but the phone just goes into recovery mode and I get an error message in iTunes.

Filter button doesn't work after changing worksheet name

I am using Bex 7.10. I have a workbook with 2 queries. I want to change the name on the Tab for each sheet but when I do that the Filter and Information buttons no longer work. Is there a way to do this?

Check in the Design mode and right click on the Filter tab and check do you see all the filters listed?
If not you can reinsert the query to a new workbook and try.
@AK

SD Override doesn't work after changing the channel

I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

Yes... Do you see this... http://s1185.photobucket.com/albums/z356/annerkram/?action=view&current=cropguide.mp4
On my SD TV... Notice the black bars on the top and bottom. Once I go in and out of the guide the black bars are gone. I have reported this but if you are confirming the issue I will report it again.
jaytee1019 wrote:
I have a Motorola 7XXX series DVR which got the 1.9 upgrade a few days ago. I have SD Override enabled and set to Stretch. When I set it like that, the SD channel I'm on will then stretch to fill the screen (and the black bars disappear as they should). But when I change the channel and go to another SD channel, the black bars are back. Or if I enable the SD Override and then turn the TV off, it will be disabled once I turn the TV on again (and the black bars are back).
It seems like the SD Override isn't holding. I don't want to have to hit the # button on the remote to change the aspect ration every time I change the channel. The SD Override should work and stay enabled once set. Anyone know how to fix this?

Touchpad doesn't work after changing from Vista to XP Satellite A210

Hi everybody!
I have changed Windows and now something is wrong with Touchpad. It works only as a mouse (cursor moves, right and left buttons are also ok).
Before with Vista I had email button, wireless connection, something else and sound changing, and plus it had extra blue light. Now these buttons are not active and no etrxa light.
Laptop Satellite A210.
I've tried all possible drivers already but maybe you could advice me something else.
thanks in advance!

please try this one
http://support1.toshiba-tro.de/tedd-files2/0/tpdrv-20070809133247.zip
and give us feedback if this driver helps or not
thx

AV not working after changing account from admin to standard

So I have a user account that was set as administrator. I removed admin privileges from that account and made it into a standard account. A few days later I noticed that I could no longer video chat with anyone (though I could chat via typing). I rebooted my router and computer a million times thinking it must be something else. But then I remembered changing the user account, and as soon as I reset the account as admin video chat immediately started working again.
This doesn't make any sense to me. I don't see why changing my admin account into a standard one should keep me from video chatting. But if there is a workaround, I would really like to know.
Thanks,
DJK
Macbook 2.0 Ghz Mac OS X (10.4.10)
Macbook 2.0 Ghz Mac OS X (10.4.9)

Hi,
Have you done anything with Parental Controls with this account ?
In/as Standard Account in the Mac Firewall is UDP Traffic Blocked ? (System Preferences > Sharing > Firewall tab).
Parental Controls is the most likely.
Otherwise I would be stuck as to a suggestion.
8:13 PM Friday; July 6, 2007

My iphone doesn't work after changing cards from us to polish ones

Similar Messages

Maybe you are looking for