My iphone fell and now shows USB on screen saying to connect with itunes but when connected i get the message from itunes tha its damaged..please help me somebody
my iphone 4s fell and display went blank,and when i restarted it shows a USB on display asking to connect with itunes,instead i went to a phone repair shop where they service iphones too.First they said that they have to install the IOS4 again in it but they could not do so due to an error so later they asked me whether they should install IOS5 i agreed but it only happened after a long struggle yet the phone remains in the same state with the display showing USB asking to connect with itunes..they could not fix it..please help me..:(
What's there to help? You dropped your phone and now it's broken. You'll have to bring your phone into Apple for an out of warranty exchange. If you purchased Apple Care+ is will cost $49.00, if not, it will be $199.00
Similar Messages
-
I have just got an iPad and I want the music to be transferred through my iPod touch using iCloud but I didn't get the music from iTunes so I don't think it will let me do it. Do you have any tips that could help me?
Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings -
Recently I had to install windows 7 in my notebook because XP doesn't have more support. Before installing I backed up all my files to my external HD. Now that I instaleed windows 7 and also installed Acrobat Reader XI, I just cannot open any of my pdf files created prior to installing windows 7.
Looking for help online, I found the solution of security and giving me access as an administrator to all my files, but it still keeps the same...
Can some one please help me out?? I really need to work on many of this files ASAP.
Thank you all in advance for you attention,
Best,
HenriqueCan you start Adobe Reader?
-
All my friends who have iPhone 4's that are white can see when the recipient has viewed their message but everyone I know who has a black one cannot. Does anyone know why or how I can make mine tell me when they have read it too?
In addition to the "Send Read Receipts" setting, make sure that your phone has the latest iOS update. It's possible that what you are seeing is the new iMessage vs regular SMS texting. Are her messages in a different color "bubble" than regular texts?
iMessage became available with iOS 5 in October 2011. If you have not upgraded to that version yet then your iPhone can't use that technology yet.
Also, note that iMessage only works with other iPhone (or iOS 5) users for which you have good contact information entered. Here is some more info on iMessage:
http://en.wikipedia.org/wiki/IMessage
Tim -
I inadvertantly dropped my iphone 3 and now have a white screen with green vertical lines to the right of the screen. It won't sync with itunes due to an error. What can I do?
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If it does not resolve the issue, the device is permanently damaged and will require replacement. -
I have iPhone 4S and now in India it's say that invalid sim
I have iPhone 4S and now in India it's say that invalid sim.what can I do??
If you have a free Yahoo account, access from a mail client is not supported, according to Yahoo. It may work sometimes, but not consistently. You need a paid account. A free account is accessible only through the webmail interface.
You might be able to get Mail working temporarily with a free account by logging in to the webmail interface and confirming your identity, if prompted to do so. -
I reseted my iPhone 4S and now i can't unlock him. It doesn't want to connect in iTunes
I reseted my iPhone 4S and now i can't unlock him. It doesn't want to connect in iTunes. What can I do?
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode. -
okay i updated my iphone 5 and i changed my password and now i dont remember it i cant restore my phone because my power botton does not work so what should i do PLEASE HELP!!!!!!! Thanks
Hi sigrun from mo,
If you are having a button issue on your iPhone that prevents you from doing further troubleshooting, you may need to have the phone serviced. You may find the following page helpful:
Service Answer Center - iPhone
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
Regards,
- Brenden -
My Iphone won't synch with the itunes 11, I always got the message that said to record my pc to the itunes but when I try it to record it that said its already recorded... What I need to do last month everithing was fine but now I can't do anything
I a;ready take off the acces of the computer and reput it
-
I clicked on iMessage on my Macbook Pro today for the first time, and now NOTES keeps opening up every 5 seconds, with a new note. I cannot stop it from opening. If I close it or force close, it opens again in 5 seconds. I can't get rid of it. I have tried to clear out the iMessage settings I had put in, and I've tried to adjust the Accounts to not include notes to synch. But, Notes will not stop. It opens a new note, and even if you ignore it, it assumes preference every 5 seconds, and the Mac is impossible to use.
Do you have any Boot Camp or other secondary partitions set up on your system? If so then try running a disk verification routine (chkdsk, etc.) in Windows to repair the disk. While I've not heard of it happening recently, in the past errors in these partitions have resulted in stubborn ghost files appearing in OS X.
-
My nephew lost the paired Apple TV remote and now I can't pair a new one with it. How do I unpair the lost remote without pairing another remote?
See this official Apple article on how to unpair your remote with an Apple TV.
http://support.apple.com/kb/HT1555?viewlocale=en_US&locale=en_US
Let us know how this works for you.
Also, are you positive the battery in your Apple TV remote is good?
Never hurts to check or ask. -
Automatically Syncing my 3rd Gen IPod Touch, All my music and videos show in the device on iTunes, but when I look at the device itself, it say no content. Can someone help? The Apps seem to sync fine, just not the music, videos, podcasts, or audiobooks.
Change your iCloud ID password: http://support.apple.com/kb/HT5624. After doing so, go to Settings>iCloud, tap Delete Account, then sign back in with the new password.
-
and when i try to Re-install itunes i get a message from itunes ERROR 7 (windows error 1114), now how do i sort this out ???
Hey deepakmenonfrompune,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following resource may help to resolve your issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
I am trying to download the InDesign CS5.5 update and keep getting "Update Failed" "Please contact your Administrator if you wish to apply updates on your machine". I have done this and now have Administrator rights, but I am still getting the message. How do I apply the update?
Direct Updates
https://www.adobe.com/downloads/updates/ -
I bought a movie with the digital copy and it gives me option to redeem it with iTunes, but when I type in the redeem code it shows a message saying: " you must insert your digital copy dvd in this computer in order to redeem this code" . The dvd is in. WTH? This is especially with FOX movies, I never have trouble with Universal Picture movies.
Thanks for your reply, but you might have misunderstood it a bit. I'm NOT trying to buy a movie. ****, I'm not even in the actual Apple Store, when this happens I'm in the library not the Store part of iTunes.
To clarify - I have purchased a physical copy of a movie which came with another physical copy which contains the digital copy. The digital copy is on the DVD, all I need is just to transfer this file to my iPod Touch, for example, I'm not trying to download it from the store or repurchase it and it's not any gift code that I've received, the digital copy is on the disc. This is the first time ever that I've purchased something on a disc and I'm not allowed to access it because the disc hasn't been purchased within my country.
So again - I'm not attempting any purchase or download any purchased digital copy - it's on a DVD I own physically so... why is even the region of my Store relevant, the code I enter is (as I assume) just supposed to check if it's a legal genuine copy (which it is, as I've said - there are 6 discs in the pack: 3 movies on 3 Blu-rays and 3 DVD containing these digital copies of them). If I own it, I think that's proof enough that I have the right to use it. I just don't get it. I fully agree with you and understand your point if there was any purchase going on here, but it's not, it's just - I put a disc into my computer and I can't access it
Maybe you are looking for
-
How to handle Keys (Sequences) generated in Database
Need some pointers about how to achieve following: I am building a cache for TRADES and have a CacheStore supporting LOAD/STORE/REMOVE methods. The TRADES cache is associated with TRADE table on the database. I have most of my business logic related
-
Try almost half day already but still do not know how to overcome the problem. My operation system is Windows XP SP3. I am installing Production Premium CS4 and it is an update version from Design Premium CS3. I tried to input my CS3 serial number in
-
Number of similar asset - AS01
Hi When we create asset master, we enter some number for example 2 or 3.. in the number of similar asset field. The system create asset numbers but there is an opportunity to change only the following fields for each asset - asset description - inve
-
Unmounting of redirected USB Drives in Solaris
Does anybody have an idea how I could get some USB devices redirected to Windows but USB drives keep mounted in Solaris? I've got a project in which some USB-devices (biometric scanners) must be redirected to Windows, but not storage devices (pen dri
-
My previous post relating to this has not inspired any responses, so I'll try to simplify the question. I'm using Acrobat Pro 8 with MAC (OS 10.4.11). In Acrobat help documents, it is said that advanced search options may be selected at the bottom of