My iphone got smashed and the home button popped out will it be elegible for oow repair?
I accidentally smashed my iphone 4, the home button popped out and the back side looks bad... but apart from the home button it did not separated in multiple parts. It turns on when plugged. Do you think I could I get a oow replacement?
You'll need to contact Apple and ask but yes, they probably will replace it for their standard fee.
Regards.
Similar Messages
-
I have a white iPhone 4 16gb and the home button doesn't sit flush with my screen, it feels like it has sunk down a little. Warranty expires June 2012 so it is under warranty, Would i be illegible for a replacement? Thanks
No way really for anyone here to give you an answer to that question. You would need to either send it to Apple for evaluation, or take it into the genius bar at a nearby Apple Store and ask them about it. Only an Apple employee could make the call, and they would need to see and handle it to decide.
-
My iphone is frozen on my face book screan and no buttons will work. Ive tried holding the lock and the home button but they wont work. Also my lock button is broken so i have to use assesive touch
You've got three options: 1. Take your phone to an Apple store & do an out of warranty replacement...cost is US $149 ~ $229, depending on iPhone model; 2. A third-party repair shop ~US $50 or so; 3. "Try" restoring your phone in iTunes.
-
My new iphone 4s would not discover bluetooth. I called apple, and the guy was great!!! He told me to hold the top button and the home button together and do not let go until the apple logo came up, this would do a hard reset. Then when it reboots, you turn on your bluetooth in paring mode, and then turn on the bluetooth on your iphone 4s and it will find your bluetooth device. Simple, yet it works!!! Hope this helps those of you having the same problem I was having trying to connect your bluetooth.
My new iphone 4s would not discover bluetooth. I called apple, and the guy was great!!! He told me to hold the top button and the home button together and do not let go until the apple logo came up, this would do a hard reset. Then when it reboots, you turn on your bluetooth in paring mode, and then turn on the bluetooth on your iphone 4s and it will find your bluetooth device. Simple, yet it works!!! Hope this helps those of you having the same problem I was having trying to connect your bluetooth.
-
I recently cracked the bottom part of my iPhone 5 right by the home button, would it be beneficial to put a screen protector over the cracks so it won't break anymore? I've cracked it twice now and can't afford to fix it again
How did you crack the screen using a Lifeproof case??
http://www.otterbox.com/defender-series/defender-series,default,pg.html -
I just bought a brand new iphone 5c and the home button is not working , why is that ?
I just had a brand new iPhone 5c and the home button is not working , why is that ?
then contact apple for warranty support or return the phone
-
my iphone blanked out and will not cut on i tried holding the power button and the home button any advice?
Hey there mello12,
It sounds like you are not able to turn on your phone. You should use these steps in the following article to help resolve it, or setup service if needed:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
Thank you for using Apple Support Communities.
Take care,
Sterling -
my iphone 4 stopped working suddenly....it wouldnt charge or anything...i was told to push the on button and the home button at the same time and it came back on.
is this a fault with the iphone????
i cant have my phone switching off randomly...any help please...thankyou.sometimes it happens, a hard reset will sometimes solve the issue.
If the issue starts happening more often, I would consider restoring the device to factory settings to install clean software. If the issue still persists after that, the device might need a hardware repair.
More info on backing up and restoring the software: http://support.apple.com/kb/HT4137
Good luck
Stijn -
I have an iPhone 3Gs and it has froze on the apple logo. I have held the on/off button and the home button together but the apple logo keeps reappearing. What Can I Do?
Try plugging it into your computer, see if that clears it up or if you can perform a restore from your latest backup.
-
ive got the iphone 5s 4 weeks ago.today the screen turned blue and the phone turned off . i tried several times to turn it on but i doesnt work even by using the power and the home button. what should i do ?
Hi vanessato,
Thanks for visiting Apple Support Communities.
I recommend these troubleshooting steps if your iPhone does not turn on.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy -
Myi iphone4 microphone not working and the home button not work after IOS6 updat
Myi iphone4 microphone not working and the home button not work after IOS6 updat
Did you try another restore and this time not to restore from a backup and see if that makes a difference? This is what Apple would tell you to do next based on my iphone 5 fiasco.
Make sure all your data is available on your computer for manual syncing later.
Since you did the hard reset I assume that means your home button isn't broken only that it got frozen before. Were you able to get the Apple logo after the reset? Did it boot?
And you are using iTunes 10.7?
I'm just trying to help get you going. -
How do I fix my iPhone it keeps freezing on the pass code and the home button reset does not work
error 3194
I can't update my phone and I AM using the latest update of Itunes AND have restarted computer and followed everything. I'm to the point of booking an app't with the genius bar because I'm finding apples instructions and this latest update to be a complete waste of time. -
So my sister locked my iPod for 44 years and the home button is broken and pushed in and doesn't work how am i supposed to reset it now?
If you can't remember your passcode, you'll have to restore it to remove the passcode, as explained here: http://support.apple.com/kb/HT1212.
If you're running iOS 7 with Fid My iPod enabled, in order to restore it you'll have to force it into recovery mode as explained here: http://support.apple.com/kb/ht1808, or erased it using Find My iPhone on icloud.com if your home button isn't working (see http://help.apple.com/icloud/#/mmfc0ef36f). -
my ipod has just black screen and the home button is not working. what will i do? help please!
Try:
- iOS: Not responding or does not turn on
When it says place the iPodin recovery mode use this prgram.
RecBoot: Easy Way to Put iPhone into Recovery Mode
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my phone is frozen and wont respond to holding the sleep/wake button and the home button how do i unfreeze it?
See Here for
Frozen or unresponsive iPhone
Try this First...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
http://support.apple.com/kb/ht1430
Maybe you are looking for
-
Transfer iphoto library to external harddrive. Best practice?
Need to transfer iphoto library to external harddrive due to space issues. Best practice?
-
How to avoid wordbreak of japanese characters in adobe livecycle designer?
I am using adobe livecycle designer to design the forms.while giving the japanese characters in the text field the word break occurs and goes to next line since it is multi byte character. I have to avoid it and display the whole word in the single l
-
Using JavaScript to remove the loading overlay?
Is there a way to remove the loading overlay. It appears to block events. I want that if the slide hasn't loaded within say, 30 seconds, then present the user with a message to go to next slide or wait. Is this possible? Thanks for any help anyone ca
-
Trying to purchase Puccini from the UK store but only way is on the US site but won't allow me? What's the problem god it is frustrating.
-
Dear All, First i am Wishing you a Very happy New Year. Herewith i am attaching the VI. This VI is occupying my total system time while execution. I need to collect around 400 texts from the user and store it in the file for future use. I need in tab