My Iphone got wet can I put the sim card on a new one and keep my data
How do you get data and contact info from the bad iphone
Data is not stored on the SIM card of the iPhone. Had you synced it with your computer? If not, your data may be lost if the iPhone is fully nonfunctional. If it still functions, you might attempt to sync it and see what you can recover from it or possibly see if you can manually get your info out and into the new phone.
Similar Messages
-
Can you put the sim card in without the tray on the iPhone 3GS?
Can you put the sim card in without the tray on the iPhone 3GS?
I don't have the tray, I have ordered a new one but would like to still use my iphone for the next few weeksDon't....wait until you get a tray...never a good idea to rig something up
-
I have my ipad notes linked to gmail and suddenly disappeared when I put the sim card into a new iphone, the funny thing is that almost all disappeared except 4 and with different dates up to two years. Why did this happen? No way to recover them?
Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off. -
Can i put my sim card from my iphone3 and put it into my iphone4
can i put the sim card out of my iphone3 and put it in to my iphone4
The SIM Card for iPhone 3GS is too big to fit into iPhone 4. It is completely compatible, so it must be carefully cut and oriented to the exact size with sharp scissors. Best solution is to get a Micro SIM Card from your Carrier, which should be free.
-
Can i put my SIM card from my old iphone 5 into my new Iphone 5 i just purcahed? And will my phone start working?
Yes all of the iPhone 5 family use the nano sim, so as long as you did not switch to a phone locked to another network it will work. But you do need to go through the activation/setup procedure with tHat sim.
-
Hi! I need help! I put my sim card into a new iphone (3g) and then tried to put it back into the old one to get my contacts from it. Now the old iphone is locked and it's asking for a passcode, but I never set up a passcode on it. Has anyone experienced this or does anyone know what to do? Thanks!
Not sure if this applies to your region, but in Australia the SIM password is often written on the "credit card" sized plastic card that the SIM was provided to you with the phone by the telco. Do you still have this? It could be in the iPhone box?
-
I want to upgrade my iPhone 3G to a used iPhone 4, can I use the sim card already in the 4 or must purchase a new sim card?
You might want to ask you carrier that question. I can tell you that when I gave my old iPhone 4 to my wife we were able to get my old sim card that was in the 4 reprogrammed with the wife's phone number. The AT&T store didn't charge us to do this.
-
Hello, I have an iPad Mini WiFi Cellular white 16Gb and I puted my sim inside it but, I cant read the text message that I recieve in the Sim. What can i do? And I can't put the sim in a cellphone coz it doesn't recognize it. Please help me! Thank you.
iPads do not do SMS.
-
My 4 year old daughter dropped my 3GS in the toilet tonight. Otterboxes are not waterproof in case you were wondering. : /
While my turned off phone is buried in a bag of rice, is it possible that I can take the now removed SIM card and put it in another 3GS for the interim? I have an other 3GS (my mom's old one that we use as an iTouch for the kids) on hand that is attached to my apple ID.
If this is possible, is it as simple as taking out the SIM card in my mom's old phone and replacing it with mine? And does this mess anything up when / if I'm able to salvage my toilet phone? Can I take the SIM card and simply put it back in my phone after having used it in the other one?
Thanks.Put the SIM in the other phone and Restore it from Backup in iTunes. If the old one revives reverse the process.
-
I have the iPhone locked How can I open the SIM-lock
I have the iPhone locked How can I open the SIM-lock
Contact the carrier that the phone is locked to. Only the carrier can unlock your phone.
-
The sim card for my new iphone 4, purchased today, is saying the sim card is not installed. I have followed the directions included on the support page but have two problems. 1. I can't open my sim card sleeve with the key and 2. I can't get any apple support until Monday evening - can anyone help please?
Hope this photo helps.
-
Hello
I would like to ask I have a problem with the Iphone 3gs 32 g
I don install the ios 6.0 and now I can not activate the sim card .... I do not even know what's centenary advise me thank youDid you already try the suggestions from this article?
Symptoms
In certain situations, iPhone may present one of the following symptoms:
"Invalid SIM" or "No SIM Card installed" alert appears intermittently.
Status bar displays "No Service", "No SIM" or "Searching" in a location with good network coverage.
Resolution
If you encounter any of the above symptoms on your iPhone, try these steps to attempt to resolve the issue:
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
copied from iPhone: Troubleshooting No Service or No SIM -
how can i fix "the sim card inserted in this iphone does not appear to be supported " after restoring a factory unlocked iphone 4
The term "factory unlocked" has no meaning. Your phone was not legitimately unlocked. Contact the carrier it is locked to and find out if you can get it unlocked.
-
Just got an ipad air, ordered from Apple online store, can't open the SIm card slot - comes with a special tool, but is it meant to be springloaded and just pop out? I think it is faulty.
Push pin in firmly (tap to enlarge image)
-
Can I use the SIM card from an Iphone 4s in a new Iphone 5?
Can I use the SIM card from an Iphone 4s in a new Iphone 5?
Yes you can install your current sim into the mini iPad. You have to cut the current sim to the nano sim. There are cutter available on eBay and amazon. You go to your local best-buy. They have it for sale. Just be carefully to align properly or else you will end damaging your current sim. Any little damage to the current sim will render it unusable.
Maybe you are looking for
-
How to prepare Aging report in another system
Hi, I have seen aging report for customer in SAP B1, its okay but not serve my purpose. i want this report little difference. i sent a link file for aging report like this way. [Aging Report | http://www.sendspace.com/file/v8jbt3] if it is possible t
-
My finder wont open after a installed the new Mavericks update, it only pops a message saying: Finder quit unexpectedly while using the finder plug-in, can anyone help me one these mather!
-
Can't Find Null Pointer Exception
Hey, guys! I've spent a couple of hours trying to figure this out, and I've been unable. When I run my program, I get a long list of errors that basically says I have a NullPointerException at Line 160 in LevelRenderer. I can't figure out what is nul
-
How to display the data in XML files into JSP using Jdeveloper.
Hi All, I have two XML files one XML file has the view names and the other has the table names of a particular views, how to display the data in JSP using JDeveloper where when i click a particular view the list of tables of that particular view from
-
Throws Exception - a newcomer...
I have written a small amount of code that takes information from a text file and displays it in a GUI (swing) - this is called my RasterDisplay class. However, I am now creating another part of the GUI which will have a button that makes a new Raste