My iphone has a pop-up that won't close, although resticts me from pressing any other buttons on my screen. please help. (:

My iPhone 5 has a pop-up titled, "Not Enough Storage", when this has come on the screen before I have preiously been able to either Close the pop-up ir go to my Settings, and then just continue using my phone. Althhough now, i am able to press either button, but the pop-up has yet to actually close off the screen- which resticts ne from pressings any buttons on the screen other than the Home and Lock Buttoms. Why is it doing this? How can I close the pop-up? please help me. (:
-Amelia

Choose Force Quit from the Apple menu, close Safari, and then launch it with the Shift key held down. If that doesn't work, temporarily disconnect the computer from the Internet.
If that message continues to appear, click here and run Adware Medic; the MacKeeper popups may also be produced by adware. You may need to use a different web browser.
(126390)

Similar Messages

I have an error message that won't go away and stops me from using any other buttons in the screen.

I have an error message reading 'item over 1 byte. Connect to a wifi network or use iTunes on your computer to download 'tv show'.
When I connect it to iTunes or use a wifi network nothing changes. The warning remains in place no matter how many times I push 'ok'. iTunes actually says the show is already fully downloaded.
I can't use any other button or controls because the only thing responding is the 'ok' button on the error message.
I've now given up and am just trying to exhaust the battery. What a joke. This device is only a week old.
Anyone else with a suggestion on how to make the error message go away? I'm worried this will happen again.
Thanks!

Try this.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

While taking photos my iphone's battery died, now my photos app won't open and I can't save any pictures taken or downloaded. Please help.

While taking photos my iphone's battery died, now my photos app won't open and I can't save any pictures taken or downloaded. Please help.
Also, I can't import my photos to my Windows 7 PC.

Try rebooting your iPhone (holding the home button and sleep/wake button together until the apple logo appear)

I have an iPhone 5 and recently when I try to copy and paste the app freezes and returns to the home screen please help.

When I try to copy paste my app freezes and returns to the home screen please help.

Try resetting ...
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that didn't help, tap Settings > General > Reset > Reset All Settings
Then restart your iPhone.

My Iphone is Suddenly becom blank and only showing Apple symbol...I even tried pressing the sleep button for long..Please help me out

I have Iphone 5s 64GB and the IOS is 8.1.2
Suddenly from today morning my iphone screen has gone blank and the Apple symbol is displaying. I Tried to reset by pressing the Sleeping button but it does'nt work and its not responding to any buttons. Still it remains the same displaying apple symbol. How do i solve it..

HI,
I tried the same after seeing your reply. Now my iphone got turned On....Thanks you so much for the reply...Thanks a ton..:)

I lost My iPod 4th Generation 32GB in my house and i havnt truned on iCloud or downloaded any apps that locate a lost iOS product. Is their any alternative to find it? Please help!

I lost my Ipod 4th gen in my house. i havnt activated iCloud or downloaded any apps to help find it. PLEASE HELP! Is there any alternative?!

The only alternative is to search for it, at least you know it is in your house so that narrows down the search area and keeps it under your control.

Since upgraded to ios 8 my iPhone has become slow and deleted photos appeared automatically in camera roll. How do I overcome these problems?Please help

Kindly help me to solve these problems.

Hi abhi_lara,
I apologize, I'm a bit unclear on the exact nature and scope of the issues you are describing. If you are having issues with generalized slowness and photo behavior after upgrading your iPhone to iOS 8, you may want to first try resetting your device:
Turn your iOS device off and on (restart) and reset
If you are still having issues after the reset, you may want to make sure you have a current backup of your data in iTunes, then try restoring your iPhone to factory settings and testing it in that default condition to see if the issues persist before restoring the apps or your data. You may find the following article helpful:
Use iTunes to restore your iOS device to factory settings
Regards,
- Brenden

HT1479 I would like to know how to burn a dvd in such a way that each image can be skipped over by pressing the skip button.

I would like to know how to burn a dvd in such a way that each image can be skipped over by pressing the skip button? If anyone could help it would be greatly appreciated!

Here's how top get a slideshow that will let the viewer manually control the forward and backward movement of the slides with the forward and back buttons on the DVD remote.
1 - put the images you want to use in an iPhoto album.
2 - launch iDVD, select a theme and add a slideshow using the "+" button at the bottom:
3 - click on the Media button at the lower right hand corner of the window and then click on the Photos button.
4 - locate the iPhoto album containing your photos and drag it into the left hand pane:
5 - select Side Duration to Manual.
In order to get the maximum manual control of the slides you cannot have add any music to the slideshow. If you do add music the slideshow will continue you advance unless you pause the slideshow and/or use the advance/back buttons and then pause.
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Since mavericks, trackpad cursor has a big box that won't go away

since i upgraded to mavericks,my trackpad cursor has a big box that won't go away

What version of Pages 09?
How did you install/upgrade it?
When did this happen?
What did you do before this happened? eg Upgrade your System?
Have you upgraded Pages '09 to v4.3?
Have you tried opening it from a different User Account? If so what happened?
Peter

DV2000 has a bad hdd that won't power up

This DV2000 i'm working on has a bad hdd that won't power up & used a usb device to clarify the issue.
Shouldn't the system bootup to bio's even though the hdd is gone?
Worked on alot of desktops & I know they should boot to bio's so you can set the hdd to auto.
This thing now won't even bootup to the bio's, just a black screen with all light's lit up on keyboard & on front.
It beeps 2 short beeps (very low beeps). No loud annoying beeps like i've read on here & the support site.
I'm pretty sure it's not a overheating gpu issue.
Hooked it up to an external monitor & stll won't show a screen as long as I entered the right keys.
Thank's for any comments you might have.
David
[Title edited for clarity.]
HP Pavilion D2346C Seagate 500 gig 7200 rpm 4 gb FoxConn socket 775
Compaq Presario laptop CQ57 Windows 7 64 bit 4 gb's ram
Compaq Presario F700US Windows Vista 64 bit 2gb ram.
Being old is no fun at all!
Home based computer repair business PCTech Inc.

First thing, see if it will boot into the Recovery Partition: Hold down Command R at restart.
If it boots up there, then it's likely that the hard drive has failed, or simply doesn't have a working system.
If it doesn't boot up there, then it's likely to be some other part of the hardware.
If it is the hard drive, then this can be replaced. You can find videos showing you how to do this on sites like ifixit.com.
Then you can just restore all your data from your backup. You do have a backup, right?

HT4623 While updating my iphone 3GS, i am getting a message that no sim card is installed in iphone. also my iphone has sows the message that iphone could not be activated because activation server is unavailable

While updating my iphone 3GS, i am getting a message that no sim card is installed in iphone. also my iphone has shows the message that iphone could not be activated because activation server is unavailable. I have reinserted the some, yet the problem persists. Please help.

If your phone was EVER hacked to unlock it, when you updated the hack was removed and it's now re-locked to its original carrier and will work only with a SIM card from that carrier..

My ipad will has a pop-up that will not go away when I click ok, and makes it completely impossible to use the ipad. The pop-up says: iCloud Backup: This ipad has not been backed up in 6 weeks. Backups happen when this ipad is plugged in, locked, and conn

My ipad will has a pop-up that will not go away when I click ok, and makes it completely impossible to use the ipad. The pop-up says "iCloud Backup: This ipad has not been backed up in 6 weeks. Backups happen when this ipad is plugged in, locked, and connected to Wifi." I do not know what to do.

Same situation. Had to pull out the Mini to research this. The Apple logo has been on the screen about five min, oh, just went black. Home brought it back and popup is gone. Wonder why this happened to many folks.

What is the problem with my desktop imac, that ical has frequent pop ups that say I am not connected to the internet, gives me an option of going offline.

What is the problem with my imac, that ical has frequent pop ups that indicate I am not connected to the server. Gives me an option of going offline. This seems to have started when I began using icloud with all of my devices.

I discovered a simple work-around that is successful (at this point in time anyways) on my IMAC/Maverick when sending attachments (not inline or embedded) to PC users.
There are several threads in here on why attachments embed in mac mail when sending to PCs, and I have had similar issues. Not sure where the fault lies, but other than purchasing an additional program to make mac mail work as other mail programs work when it comes to attachments, I found no real solution that worked for my business PC folks. I did all the right things - sent my attachments in mac mail "windows friendly," "plain text," and "attachments at the end" and still got complaints when sending to my pc workmates using Outlook. I tried another suggestion I found here - zipping the files and sending the zipped file, but my workmates did not like that either and still asked why?
By trial and error I discovered that when I attach any pdf to the email as well as the questionable jpgs, the attachments arrive in their PC inbox as attachments that can be used as needed. I don't know why this works, but it has made sending attachments a happier task for my business group.
I would be interested to see if this works for others.

How do I unfreeze my ical? ical has an error message that won't go away even if I force quit.

Wondering how to get my ical running again? I have an error message that won't close and ical is unavailable. Error just says the server responded with an error. Happened after I cut and pasted a note into a reminder by accident...

Mine started doing this yesterday after attempting to install the most recent security update (im running Tiger OS 10.4.)
Took a while for me to remedy it but I found that by starting up from the CD that comes with the macbook (by holding 'c' as you switch on) and doing an Archive and Install (took 2 attempts as the first failed) it is working fine again. Installed the update by dragging it from the trash and clicking it and the Macbook seems good again.

HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago. I changed my iTunes password about 10 months ago; but apparently, the backups continue to use the password that existed when the phone was first set up.
A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password.
I thought iTunes and Apple were smarter than that. With so many posts stating exactly the same problem, it is clear that this is bug in the software.
Best,
Craig

My iphone has a pop-up that won't close, although resticts me from pressing any other buttons on my screen. please help. (:

Similar Messages

Maybe you are looking for