My iphone has a warm temperature when idle and it gets warm when I make certain phone calls using the ear buds that came with the iphone

I am experiencing warm temperatures with my iphone 4? I cannot explain it but it seems to happen when I make certain phone calls or if the phone is just sitting idle? Any insight on this problem is much appreciated.

When you say "shift to speaker mode" are tapping on "speaker" icon thta appears on the screen when you take the phone away from your ear? IF so go to settings/general/accessibility/incoming calls and check "default"

Similar Messages

  • When you open iTunes this message appears. The sim card inserted in this iPhone does not Appear to be supported. Only compatible SIM cards from a supported Carrier may bre used to activate iPhone. Please insert the SIM card That cam with your iPhone or vi

    When you open iTunes this message appears. The sim card inserted in this iPhone does not Appear to be supported. Only compatible SIM cards from a supported Carrier may bre used to activate iPhone. Please insert the SIM card That came with your iPhone or visit a supported Carrier's store to receive a replacement sim card.

    dear sir.
    where i get this replacement sim card.i live in bangladesh.not have support carrier in my coutry..
    so how get..please help me..

  • HT4623 The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to r

    The SIM card inserted in this iPhone does not appear to be supported.
    Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to receive a replacement SIM card.

    I got the same message.
    I bought an iPhone 5 at full retail price from an AT&T store. I requested the phone to be unlocked through their unlock portal. The AT&T unlock system asked for the IMEI number, a copy of my receipt showing that I bougth the phone at "No Commitment" price. A few hours later I received a message from AT&T stating that the unlock request was approved. I then followed the instructions to back up the phone and restore it through Itunes. The phone activates normally with the AT&T SIM card. But when I insert my VODAFONE SIM I get the massage "THE SIM CARD... etc.
    I tried again to back up & restore the phone 3 or 4 times, no success. I have also allowed 24 hours for the unlock process to complete. Still no luck.
    I have checked again on the AT&T Unlock Status portal and it shows "Unlock approved".
    Where is the issue here? Do I have to call Apple or return the phone to AT&T and get the unlocked phone through the Apple Store?
    Thanks for any help on this.

  • TS4148 The SIM card inserted in this iPhone does not appear to be supported. Only compatible SIM cards from a supported Carrier may be used to activate iPhone. Please insert the SIM card that came with your iPhone or visit a supported Carrier's store to r

    The SIM card inserted in this iPhone does
    not appear to be supported.
    Only compatible SIM cards from a supported Carrier may be used
    to activate iPhone. Please insert the SIM card that came with your
    iPhone or visit a supported Carrier's store to receive a
    replacement SIM card.

    It appears that you have an iPhone that is locked to a carrier other than the one you were using. Now that you have tried to update the iOS, it has relocked. That is what happens if you are using a phone that has been hacked to unlock. You have also forfeited support from Apple and from this forum.

  • I have a pioneer 50 inch plasma   I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.   The receiver has two HDMI  inputs in the back.

    I have a pioneer 50 inch plasma + I purchased new from the company back in 2005.   I tried to hook up an Apple Tv to the pioneer receiver that came with the TV.   I can not get it to work.
    The receiver has two HDMI  inputs in the back.  However they say they are not for PC's.  Furthermore they must be set up by going to the home menu.    I tried everything, but I can not get the receiver to talk to the Apple TV. I even tried a connector that uses an HDMI to the Apple TV that has the other side of the cable as 5 RCA cables.  I could not get the receiver to see the Apple TV.   I have a newer TV in the house, it has no problem talking with the Apple TV.  But this older system seems to be handicapped in its ability to talk with the newer Apple TV system.
    My Email is [email protected] 
    Do you have any suggestions
    Thanks
    Bob

    I could not access the Apple TV on the television.   If I put the Apple TV directly into by TV, I have an external sound system (entertainment system), therefore I worry that I would by pass the audio.
    Thanks for taking your time to attempt to help!   Any more suggestions would be greatly appreciated.
    Bob

  • If you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?

    if you dont have the sim card that came with the iphone and you resync it how do you get it to turn back on .?

    You have been syncing the iPhone with iTunes on your computer without a SIM card inserted in the iPhone for how long?
    If the iPhone says connect to computer, this means there is a problem with your iPhone that requires restoring the iPhone with iTunes. As already provided, not having a SIM card inserted in an iPhone does not prevent or shouldn't prevent syncing the iPhone with iTunes. Depending on the iPhone model, it is required in order to restore the iPhone with iTunes.
    http://support.apple.com/kb/ht3406
    To re-activate an iPhone 3G or iPhone 3GS that displays the "Connect to iTunes" screen:
    Insert a SIM card from the carrier with which you used your phone. Note: If you are using the same carrier, you can use the activated SIM card from your new device to do this. If your device is unlocked by your carrier, you can use any SIM card.
    Connect the iPhone 3G or iPhone 3GS to iTunes on a computer connected to the Internet.
    iTunes will then activate the device. You can remove the SIM card at this point and use the iPhone as if it were an iPod touch.

  • Please insert the SIM card that came with your iphone or visit a supported carriers store

    please insert the SIM card that came with your iphone or visit a supported carriers store to recive a replacement SIM card

    Yes and exactly what is your question here? 
    Do what is tells you to do and insert the SIM card that came with your phone or if you are having problems, contact your phone comapny/carrier for help.
    With no proper quesion and no further information, how on earth do you expect anyone to be able to help you?

  • I have upgraded my iphone  to iSO version 6 but the problem is the phone was locked it shows that only compatible SIM cards from a supported carrier may be used to activat Iphone.please insert the SIM card that came with your iphone

    i have upgraded my iphone  to iSO version 6 but the problem is the phone was locked it shows that only compatible SIM cards from a supported carrier may be used to activat Iphone.please insert the SIM card that came with your iphone

    So then do as it says...insert the SIM that came w/the phone.

  • Hello. I recently bought an Iphone 5S. I tried to charge it with the original charger that came with the phone and it doesn´t work...The cable is good, I´m charging the phone via my PC. I read many answers posted here but no one helped me. Thanks in

    Hello. I have a new Iphone 5S and the charger taht came with the phone doesn´t charge my Iphone. The cable is good because I´m charging the phone via my PC. I tried every recomendation posted here but none helped me...I live in Argentina and we don´t have local support here, I would´ve ask for a new one but it´s not an option here. Does anyone know what can I do? Thanks in advance. Regards.

    I live in China as well and my iPhone5s is the model A1530 I bougth outside China. I have the same problem as Nikatnight with the iPhone while the iPad Air (wifi only) is working like a charm. It must be definitely something related to the carrier since I was abroad few days ago and everything worked well.
    If you pay attention at the source of your maps, you'll discover they are provided by AutoNavi instead of TomTom and make them appear in chinese with their own border interpretation. Queries are only acceppted in Chinese (p.e. if I type in english "Los Angeles International Airport"  it replies it cannot locate it)
    I suppose everything will be fine when you'll be out of censorship....
    Perhaps iOS  Apple Maps are absolutely useless for expatriate in China.
    Use Google Maps instead
    BTW, I'm surprised how much Apple might prostrate towards hard power Governments.... No matter what, money are always on top!

  • I accidentally deleted the 'Calendar' app that came with my iPhone 4S.  How do I re-install it?

    I was wondering how I can reinstall the 'Calendar' app that came (already loaded) on my iPhone 4S?

    You can't delete the Calendar App. Do a search for Calendar in to iPhone search screen (before the first App screen). You may have placed it in a folder or moved it to another screen.
    If you have problems you can use Settings > General > Reset > Reset Home Screen Layout.

  • Just updated to ios 4.3.2 and none of my IPhone 3Gs apps will run. The original apps that came with the phone do work though.  What do I have to do to get them working again?

    Just updated to IOs 4.3.2 and none of my IPhone apps will run.  The apps which came with the original phone do work though.  What can I do to fix this problem?
    Thanks,
    Brian

    Helfpul answers here:
    https://discussions.apple.com/message/13386937#13386937
    A restart sometimes works

  • When I plug my iPhone in to my computer with the usb cable that came with the phone the screen says, "Charging is not supported with this device".  How can I fix this?

    When I use the same cable with the wall adapter it charges just fine.

    LOL     My situation is the opposite.  plug my iPhone 3GS with USB cable and attach to mini adaptor (or whatever the small one is called) and it does not charge. Connect the same iPhone 3GS to my MacBook, using same cable, an charging takes place for iPhone.  Then,  connected the iPhone to the AC power with the large Apple AC  adaptor and it always charges. Seems to be the small adaptor and sometimes a third party automobile adapter.
    At first I thought this might be because I was using third party USB cable, but now wonder about that since there are so many problems that others are having. 
    Having scoured the discussions, it appears no definitive answer has been given.  Am I wrong. Maybe I never found the answer to what is happening here.
    if you can help, please reply to help all of us with the issue still - June 2011.
    Thanks!

  • I cant figure out why my HTC Droid DNA is no longer recognized by my computer when i hook it up with the USB cable that came with the phone.

    I used to be able to just plug in my phone with the USB cable to my Windows 7 computer and browse phone storage with no issues. Now my computer sees it as an android phone but when it tries to automatically install the drivers for my phone on the computer, i get an access denied error message. No option on the phone that i can see that allows me to mount phone as a usb drive. This used to work just fine with nothing more than just hooking up the cable. What gives??

        Let's get that access granted again, e_rock_b. The HTC DNA doesn't have a special USB Mass Storage Mode that needs to be turned on. Usually, it's as simple as connecting and browsing http://vz.to/1jktbZD as you mentioned. If your computer is no longer allowing that easy access, try the steps at http://vz.to/1jktvr6.
    JenniferH_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • Can I install snow leopard, using my original disk that came with the computer, on my mac that has mavericks as its OS?

    I recently had a new hard drive installed in my macbook pro (2009 model). Previously I was running snow leopard and refused to upgrade as I knew it would cause my pro tools to become incompatible, however when I received my knew, hard drive due to my old one becoming corrupt, the apple techs had installed lion as the OS, I updated to mavericks on the off chance the incompatibility was just with Lion. However I my Snow leopard disk is also incompatible with the new OS, I would like to know if there is any way to install snow leopard onto my mac while it is using mavericks?

    Restart the computer with the disk in the drive and the C key held down and install Snow Leopard onto a blank partition or drive. If needed, use the Disk Utility to repartition or erase the internal one.
    (109275)

  • I want to wipe the hard drive on my apple G4 powerbook clean. I do not have the original discs that came with the laptop. I do have the OS x 10.4 disc that I purchased. When I reinstall 10.4 will that disc also have itunes iphoto and safari on it.

    I have an apple powerbook g4 running 10.3.9 which my daughter gave me. However all the installation discs were lost. I just purchaed OS x Panther for it. I want to wipe the hard drive clean to get rid of all of her personal information as I want to donate the laptop to a needy family. Do I need the installation discs or will the panther os x disc have everything that I need to wipe the hard drive clean and install panther. I do have an external hard drive.

    Hello again,
    Some of those applications you mention will not be on the recently purchased OS 10.3 Panther disk so you'll need to make a copy of them so you can restore them later.
    Copy to your external drive;
    iPhoto, iMovie, iTunes* and you may also have World Book 2003 depending what bonus software was installed when new. There may be other Non Apple applications you want to keep also.
    *You could probably still get a download of iTunes but because it is such an old version, to save searching for it, make a copy of it while it is in front of you.
    Everything else will be the 10.3 Panther disk including Safari.
    Ideally with original disks, the process would be:
    Insert your Install disk 1 into the drive and then Restart, and hold down the C key to take you to the installation windows.
    Select your language, the start up Disk and choose Erase and Install.
    At the point your registration process starts, abandon the registration, quit and eject the disk and switch of the computer.
    This will allow the new user a freshly installed system, whereby they can complete the registration process themselves.
    However...
    But as you want to add back iPhoto and iMovie etc, you'll proceed to create an Admin account, in order to add back those applications, by copying them from the external drive back to the Applications folder. After doing that you are finished.
    Instruct the new user can create their own Admin account, (more than one can exist) and thereafter deleting the first one you created.
    This would achieve a fresh setup akin to the original.

Maybe you are looking for

  • Unable to start netweaver developer studio 7 (sp15) error attached

    Hi, when I try and start netweaver developer studio 7 (SP15) I get the error message below. I also got an error message when trying to reinstall the software about a file not registering and needing to reboot. Which I did, I have tried deleting the w

  • Folder Sharing for CC Teams - Is this ever going to happen?

    I have now been using CC for Teams without an advertised function since early June this year. I keep seeing posts in these forums that the service is 'coming soon' but it is very frustrating and very difficult to plan and organise schedules not knowi

  • Bug or am I doing it wrong? (Table of Contents)

    One table of contents works fine for my thesis, but then I try to add a list of figures. I insert the table of contents, the instant that I change anything about it in the Inspector, the first table of contents gets changed too. I can't figure out ho

  • How to receive the error in the output panel in a textfield

    Hello, if you test your movie and when an error occurs the error is going to the output panel. Is it possible to catch these errors en put them in an textfield? My error example in my output is : Error opening URL "file:///C|/DOCUME%7E1/CSM%7E1/LOCAL

  • Macbook won't startup after installing update to osx 10.4.8

    After I installed the update to OSX 10.4.8 I get the screen with the spinning wheel and then a dialogue box that says the macbook needs to be restarted. Same thing every time. Any ideas?