My iPhone has an iTunes icon and usb connector

I cannot turn on my iphone because it has an itunes icon and usb connector showing.  It isn't recognized in itunes on my brand new iMac

iPhone User Guide (For iOS 4.2 and 4.3 Software)
iPod doesn't appear in iTunes or on the Mac desktop.
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

Similar Messages

  • I was updating new OS with itune after that my IPhone is showing itune icon and usb connect icon. it is not starting.

    I was updating new OS with itune to my Iphone 4S. it stuck in mid and showing itune and usb connect icon. After restart also, showing same icone. it is unable to connect with itune after multiple tries also. would you please help me to rectify this problem?

    Note.  Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Some users have reported as many as 8 or 9 attempts were necessary before success
    NOTE:
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download

  • Help! my iphone 4 was stucked or cannot recognize by my itunes after updating to 4.3.5? how i can open it again, it seems stucked with an itunes icon and usb on my iphone screen

    help! my iphone 4 was stucked or cannot recognize by my itunes after updating to 4.3.5? how i can open it again, it seems stucked with an itunes icon and usb on my iphone screen.
    pls help me recognize my iphone4 to itunes and bring back my iphone 4 the way it was before. THANKS!

    Hi my iphone 4 is also having the same problem of hanging with the same screen reflected. itunes keep suggesting me to do a restore setting but it fails to restore after running half way. Have u solved your problem ardy..? Hw can i / we do about it...?

  • HT1349 When I turn on the ipad all I see is iTunes icon and usb cord.  Can not use the I pad. What do I do?I

    When I turn on my iPad the screen is the iTunes icon and usb cord.  I can not go anywhere.  Stuck on that page?  What do I do?
    i

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • Just installed 7.02 and only get itunes icon and usb cord. If I connect to itunes as requested, will I lose all my photos ?  7 installed just fine, why the problem with 7.02 ?

    Just installed 7.02 and only get itunes icon and usb cord.  Why should I have to connect to itunes ?  If I do, will I lose all of my photos ?  Shouldn't I get free service for their software problem ?

    You don't have to update to 7.02 if you don't want to, though this update does fix a few glitches in 7.0.
    Before updating, you should always back up your data - it's standard practice. I've never lost pictures in an iTunes update.
    Perhaps you could elaborate on the comment, "Just installed 7.02 and only got itunes icon and usb cord." What problem are you having, exactly.
    Your next question confuses me. "Shouldn't I get free service for their software problem ?." What free service were you looking for? You can always go to your local Apple store for help, or ask questions here for free.

  • Why does my iphone have an itunes icon and a charger shown

    why does my iphone have an itunes icon and a charger shown

    Try this
    If you can't update or restore your iPhone, iPad, or iPod touch
    https://support.apple.com/en-us/HT201263
    Best of Luck

  • I was downloading the latest update for my ipad and now my ipad has the itunes icon and chord on the front but won't turn on or be found in my itunes or computer?

    I was attempting to download the latest update to my ipad which was to take 2 hours so i left it alone, when I came back my ipad would not turn on, now it has the itunes icon and a plug on the front, what does this mean?  And now it can't be recognized on my computer at all?
    I did a restore but nothing has happened.  How do I get it to come back on?

    You'll have to restore your iPad.  With your iPad still connected to your computer, press and hold BOTH the power and home buttons at the SAME time and your iPad will restore. 

  • Itunes icon and usb icon on screen ........

    The iTunes icon and usb cord icon shows on my screen to plug it into the computer. When I do so iTunes tells me I must first type in my password on my ipod so itunes can connect to my ipod. The problem being that the itunes and usb cord icons are on my screen and I am unable to get to the password to type it in...HELP PLEASE

    Your phone is in recovery mode; you will NEED to restore the device by connecting it to iTunes. If you ever synced  with iCloud then you may have contacts saved there, otherwise...unforunately your data will be lost

  • HT4623 upgraded to ios7 iphone now displays itunes logo and usb cable will not restore in itunes, wil not restart

    upgraded to ios7 iphone now displays itunes logo and usb cable will not restore, will not restart

    Hi there emynona,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    -Griff W.

  • My iPad has the iTunes logo and USB cable on the screen. Can I still back up my music and photos?

    My iPad has the Itunes logo and USB cable on screen. Can I still back up my files?

    If you haven't already done so, its unlikely.
    You can try holding both the home and power buttons at the same time until the apple logo appears on the screen, then let go.

  • IPod Touch shows itunes logo and USB connector on the screen??

    Hi,
    I was trying to update the version of the software on my iPod Touch to V3. But it threw an error and after that it is not getting recognized by itunes. It only shows itunes logo and USB connector image on the ipod screen. How do i get the ipod workng again? plz help.

    try the suggestions in this KB.
    JGG

  • Ipod came up with error 1603 when trying to update now wont work has itunes icon and usb picture on screen

    ipod  came up error 1603 when trying to update now screen just stays on picture with itunes icon and white usb picture wont do anything now

    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • My ipad has a itunes icon and a charger connection but won't go to the home screen

    I tried to update my iOS system on my iPad 2 yesterday and it never went through because I didn't have it connected to the charger.  This morning when I tried to update again I got the same problem.  The only differenc is that I was able to get to my homescreen once before the screen blacked out all execpt for the iTunes icon and the charger cord symbol.  Now I cannot get any screen to appear on the iPad besides that.  I have tried plugging my charger into the iPad and the symbol only goes away when I hold the power button.  It reappears when I hold the power button.  Is this normal for the new updating system?

    YOU ARE IN RECOVERY MODE (something went wrong with update)
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • My iPad s frozen with only iTunes icon and usb cable showing and cannot access anyhting. Can anyone help? - Apple won't

    Since receiving a iOS software update (6.1.2) my iPad has frozen and only the iTunes icon and a usb cable show on screen. I am unable to access any App. Can anyone help or point me in the right direction. this was raised with Apple and ticket number advised on 3rd March but not a word from Apple since.
    Thank you

    Try and turn off iPad/iPod and proceed to step 3 of Recovery Mode.
    Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • My ipad is showing an itunes icon and USB cord and is frozen.

    My ipda is showing a USB plug and cable with an itunes icon and is frozen

    Is this the first time you've fired it up? If so, what it wants you to do is to attach it to a computer that's running ITunes 10.5. iTunes will then 'see' the iPad and start a dialogue box to activate the iPad.

Maybe you are looking for

  • Import to iTunes at a specific time

    Hi, not sure if this should be in the iTunes section so apologies if this is the wrong forum I would like to import files from a folder to iTunes at a specific time of day when I'm not present, is this possible or maybe is there an app that could tak

  • Merging Java Transport request with Abap Transport Request in Charm

    Hello All, We have activated the Change request Management in Solution Manager. Therefore transport request of type workbench and customising can be created when you choose action 'Create Transport Request'. However we have some SAP systems that have

  • Post with clearing through transaction code f-04

    Hi While clearing the Gl account Manually with transaction code F-04 we are getting the Error Consolidated companies SASA and ' ' are different Diagnosis The number of the affiliated company must be clear for the selected document type for all line i

  • Multiple soundcards feasib

    I want to try a technique with Acid 5 which requires two sound cards. I have an Audigy 2 SZ in a Shuttle SP8P with no free expansion slots. I do, however, also have an NX. I suppose I could just go ahead and try it, but I've often gotten the impressi

  • Does Time Machine backup BootCamp

    I have an Imac & a MBP with Bootcamp partitions. I back-up to a Time Capsule using Time Machine. Do I need to do anything special to include the Bootcamp patition in that auto back-up process?