My iPhone has stopped working correctly with Blurtooth.

I use the bluetooth to connect to my iCom which connects to my hearing aids. It worked just fine for a month. It no longer "tells" me that a message or mail has arrived. It sometimes doesn't even tell me of an incoming phone call. And now it disconnects without warning.
Thanks for any ideas . . Steve (iOS is actually 4.2.8)

Any thing happen if you try to connect to iTunes?
One thought - do not charge it and let the current charge fade out - then when you charge it back from scratch it should reboot into some working mode
Another - if you do not want to wait - bring it to a store

Similar Messages

HT1222 Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

Natan turbo hadar,
I have the same exact problem.
I put an iPod shuffle on the Bose system, it plays just fine.
My iPhone 4s works just fine connected to my car stereo.
My iPhone 4s on the Bose will charge, it "thinks" it's playing, song shows, time line shows it's playing, can pause if I touch the phone's screen.
The remote for the Bose WILL NOT pause it, forward to next song, etc. It does work with the iPod shuffle.
So it's not the Bose, it's not connections, it's the iOS 7.1.1
Everything worked fine before, any one else have suggestions?

My iPhone has stopped working over wifi. It was working till late night yesterday and in monring it stopped. I thought that it may be problem in my internet. But noticed that it doesn't work with office wifi as well. Have done some of the reset option.

My iPhone has stopped working over wifi. It was working till late night yesterday and in monring it stopped. I thought that it may be problem in my internet. But noticed that it doesn't work with office wifi as well. Have done some of the reset option.

Follow the steps here. If nothing works, make an appointment at an Apple store or with whoever handles iPhone warranty where you live:
http://support.apple.com/kb/TS1398

My iPhone has stopped working all I have is a screen with the apple logo on it

My iPhone has stopped working. All I have is a black screen with the apple logo displayed. The phone does not respond when I press the buttons and switches,

Any thing happen if you try to connect to iTunes?
One thought - do not charge it and let the current charge fade out - then when you charge it back from scratch it should reboot into some working mode
Another - if you do not want to wait - bring it to a store

MESSAGE - itunes has stopped working correctly

Hi,
I have recently transferred to a new PC and installed itunes 10.5.
When opening itunes i receive the error message:
"itunes has stopped working correctly. Windows will close the program and notify you if a solution is available." Needless to say no solution is received.
A suggestion in another post on this subject in the Apple Support Communities thought this was related to itunes trying to access the itunes store and failing. Following this solution (which worked for the person who had the problem with his iphone) I:
disconnected from the internet
opened itunes
syncd my ipod touch
enabled the internet
closed itunes and re-opened it.
When NOT connected to the interent all was well and I synd my ipod touch. However on re-connecting to the interent I received the same error massage. This suggests that the problem is something to do with the program trying to access the internet.
Has anyone any suggestions as to how I can solve this problem? It may not be relevant but I use AVG Internet Sucurity 2012.
Thanks, Martin

Great!!

Finding text in a PDF using preview has stopped working (correctly)

Finding text in a PDF using preview has stopped working (correctly).
When I search for certain words in a PDF using preview, it correctly finds all the pages in the document with that word. However, it no longer highlights the word being searched for. I have looked through the various settings and cannot figure out how to turn this back on.
Thanks.

4Shared worked, but having to register to retrieve files from there is a nuisance.
The problem is that you use special graphic state operators inside text objects which is not allowed:
BT
/printmatic_F1 58.133398014634 Tf
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 86.448306387737 264.65046258267 cm
(t) Tj
Q
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 102.60939103581 264.65046258267 cm
(e) Tj
Q
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 134.93156033194 264.65046258267 cm
(x) Tj
Q
q
/DeviceCMYK CS
1 1 1 1 SCN
/DeviceCMYK cs
1 1 1 1 scn
0.62060289801053 w
0 J
0 j
2.189349112426 M
0 Tr
/printmatic_F1 58.133398014634 Tf
1 0 0 1 163.99825933926 264.65046258267 cm
(t) Tj
Q
ET
Have a look at the PDF specification ISO 32000-1:2008 (e.g. at http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/PDF32000_2008.pdf). Table 51 shows that q, Q, and cm are special graphics state operators, and Figure 9 illustrates that these operators, therefore, are not allowed in text objects, i.e. between BT and ET.

My trackpad pinch and close has stopped working correctly on web pages, but ok on email?

Recently the pinch and close on my trackpad has stopped working correctly when I view websites/pages, it will enlarge only once and will not reduce at all after that. Although It works perfectly well when viewing emails. Does anyone know if this can be solved please, my laptop is still under wareenty but this feels like a software problem maybe..?
Thanks
Milosorb

First look at this Apple support article for possible solutions:
https://support.apple.com/en-us/HT203171
If no success, sometimes a very through cleaning of the trackpad will restore functionality.
Last, open the MBP and examine the battery to see if it has expanded. It resides under the trackpad and may be interfering with it. If that is the case, the battery should be replaced.
Ciao.

My iphone has stopped working it had 80% of charging but the screen got black and now i cant switch it on, what should i do?

my iphone has stopped working it had 80% of charging but the screen got black and now i cant switch it on, what should i do?
help me ASAP please

Hello sameen shah,
The following article would be a great place to start for information that can help get your iPhone working again.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

My iPhone has stopped working. I have insurance but Verizon isn't willing to send a replacement. Please help!

I have insurance on my iPhone 4 with the extended warranty. For the last few days, I've been having non-stop problems with the phone. Freezing, closing apps when it wants to, restarting itself. I called Verizon customer support and explained the problem. She tried to do basic troubleshooting on my phone but I had to stop the process because I wasn't near a Wi-Fi to do a hard reset after the basic troubleshooting. Which wasn't a problem.
So today my home button stopped working completely. I had to turn off the phone and turn it back on after opening an application because I couldn't do anything with it. So I called Verizon to see about more troubleshooting and the girl (who was very nice btw) helped me do a hard reset. The home button started working, but now has stopped working again.
The thing with the warranty on the phone.. when I bought the phone from someone, I was asked if I wanted insurance on the phone when I activated it. I said yes. So the insurance was added. Now that something is wrong with my phone, I am being told that the warranty should have never been added because I didn't get the phone actually from Verizon. I have been paying for insurance each month as long as I have had the phone. If not almost a year, maybe a little over a year? I'm not sure how long I have had the phone. So I have insurance on the phone right now.. and I cannot get my phone replaced. I do not work for Verizon, so if I am asked if I want insurance and I say yes, I expect and assume it's covered incase something goes wrong. Which is the point of having insurance. Now, it's a different story? I am confused and a little upset with the whole situation. The only thing the Verizon rep today told me was that she could refund me three months of charges on the insurance and get it removed for me. I did not agree to that and I didn't want the insurance removed as of right now until I get this fixed. I told her that it wasn't about the money for the insurance.
I am hoping someone with Verizon on here can help me with my phone situation because apparently it's something with software. Please help!

I would think that at the very LEAST you would be eligible for a COMPLETE refund of ALL charges for insurance paid thru Verizon! They were charging you for something you were ineligible for! Verizon has a record of whether or not you purchased the phone from them - otherwise how could they deny the claim!
It very sad to see how customer service and customer satisfaction has been lost here ... !

Just downloaded itunes version 10 .2.2 and my iphone has stopped working. now showing fault on itunes asked to reinstall. Why has this happened?

just downloaded itunes version 10.2.2 + Qucktime and my ipohone has stopped working!
I am told there is a fault in my itunes software and I must reinstall.
Why has this happened, is there a fault with this new version?

Whilst I don't have an answer, I hope a knowledge specialist does.I've seen numerous posts like this.After 10.2 update I lost library and haven't been able to actually connect my iphone to itunes for the upgrade. Each time I connect the iphone my system crashes. There was NOTHING wrong with my itunes or system until the point of update. There doesn't seem to be support, despite the extent of this problem. My iphone seems to need an update as its overheating and battery life is a nanosecond. BEYOND FRUSTRATED! All input welcome.

Iphone has stopped working cannot do anything

Hi all my iphone 3g has stopped working cannot do anything with it also get really hot when i plug in to see if that would put it right

Put the phone into DFU mode, also known as recovery, see:
http://support.apple.com/kb/HT1808
or see here - http://support.apple.com/kb/TS3694#error21 if using Windows

The sound on my laptop has stopped working entirely, with and without headphones. What should I do?

The sound on my computer has stopped working. I have searched through countles google entries to try and figure out the problem but I can't find anything remotely useful. I never spilled any liquid or anything on my computer. I was just searching through youtube and when I clicked a video there was no sound. Then I checked iTunes and tried to play some music, still no sound. I played around with the preferences and volume control, still no sound. If you have any advice please help. Going to the apple store is so expensive and I don't have the time or money.

Did you try resetting PRAM and SMC?
Is there any red light visible in the headphone port?

"Adobe Setup has stopped working" problem with XP, not Vista

Adobe has posted a tech note to work around the "Adobe Setup has stopped working" for Vista:
http://kb2.adobe.com/cps/408/kb408524.html
However, I am having almost the same problem with Windows XP SP3. I have tried installing and updating using both an admin class user and the actual Administrator. At first I thought it might be related to Symantec EndPoint until I saw the Vista thread, but I get the same problems even with EndPoint not on the machine. The posted technote (which seems oddly written by the way.. mentioning junctions AND folders?!?) does not cover XP, only Vista. My attempts to translate it over to XP procedures does not get very far.
The install goes fine, but any subsequent updates for the suite fail. Once the failure occurs, InDesign and other apps will refuse to open. I can't even right-click a file in Windows Explorer or it also results in a crash (I am guessing to the CS Drive and Bridge additions to the contextual menu). The main apps that fail to update appear to be the same ones mentioned for Vista:
Adobe Drive and Services update (aka Version Cue client 4.0.1, Creative Suite Infrastructure 1.0.1)
Adobe Version Cue Server 4.0.1 update
Flash Lite 3.1 Update for Adobe Device Central CS4 (aka Device Central 2.1)
Adobe Output Module update for Adobe Bridge CS4 (aka Output Module 2.1)
Extensions Manager CS4 2.1
Screenshots of the errors are here:
http://drop.io/tlzrsif
Luckily we use drive images for our systems so I can hop back to a freshly prepped notebook with out much delay, but given the long CS4 install time this has become a pain to try to solve.
Have any others run into this problem using XP and not Vista?

here you go
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunesHelper.exe
Application Version: 7.3.1.3
Application Timestamp: 468d67e8
Fault Module Name: QuickTimeStreamingAuthoring.qtx
Fault Module Version: 7.2.0.240
Fault Module Timestamp: 4684a83a
Exception Code: c0000005
Exception Offset: 00016c09
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 18fe
Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
Additional Information 3: 4735
Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
Extra information about the problem
Bucket ID: 466198587

HT4061 My iphone has stopped working but the lock button IS working...when it stopped working it had a 50% charge left on the battery...it simply went to a black screen and will not turn on...my phone will not charge on the computer or the plug socket

Hi
My iphone 4 has stopped working...the lock button IS working...when it stopped working it had a 50% battery remaining...it was working when I last used it and when I returned it had a blank screen....it will now not charge or connect to itunes when plugged into the computer and it will not charge on the plug socket....I think the last iOS op system updated was 5.1.1....please help

Try holding both home and power buttons until apple logo appears (ignore on/ off slider) and then let go. No data will be lost. Wait for phone to restart

Itunes has stopped working correctly

Itunes said I successfully installed it on my laptop(with vista). WHenever I try to open the program however it doesn't open and tells me that a problem caused itunes to stop working correctly(It does not give me an error number).
Is there a way to fix this? I have already scanned my computer for viruses if that helps narrow it down.

Try and use Microsoft's Cleanup Utility and then reinstall Quicktime/iTunes:
http://support.microsoft.com/kb/290301
Make sure it's a new and fresh download from:
http://www.apple.com/itunes/download/
See if any of these help:
http://docs.info.apple.com/article.html?artnum=302538
http://docs.info.apple.com/article.html?artnum=302386
http://docs.info.apple.com/article.html?artnum=302775
If not mentioned in the articles, make a new user account in Windows and see if iTunes opens. That will tell you if there's something funky in your main account (if the new user works), or if you have a system-wide issue.

My iPhone has stopped working correctly with Blurtooth.

Similar Messages

Maybe you are looking for