My iphone has trouble connecting to a wifi range extender

I have a Virgin media wifi Hub and a TP Link wifi range extender and have intermittent connection issues.
Unhelpfully i have heard rumours that iphones and iPads don't react well to environments with range extenders.
I have checked the firmware of the extender (it's up to date).
I have checked the settings of the extender - going through a factory reset/clear all settings and initial set up - they all look fine.
The iPhone and iPad are both iOS7.0.2 and do not have any issue connecting to wifi within "well known high street coffee shops".
I've searched for any settings obvious or otherwise on the devices in order to resolve this.
Any suggestions gratefully received.

I use an Apple Airport Extreme and two Apple Airport Express devices for my WiFi Network. The two Apple Express devices are set up as range extenders. This setup works well, with the exception of when I use my Microwave Oven the newer and furthest Airport Express drops the connection to any devices that were using it. I have to unplug that Express and then the devices reconnect. I am sharing this only to say that interference can play a part in Network issues with Range Extenders. My newer Airport Express is a Dual Mode supporting 2.4 and 5.0 at the same time. Any connected device capable of 5.0 will use the faster signal.
Don't know if your Network devices allow for manual Channel selection but if so you might want to try some various channels to see if that offers a reliable connection.

Similar Messages

Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
Thanks

The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
Assuming your AE is gen3 or greater.
You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
If your AE is G wireless or earlier model.. really the time has come for replacement.
If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

My iPhone has trouble connecting when I plug in my lightning connector

Anybody else have this problem and is there a fix.

For me this is a general problem. Connecting and reconnecting frequently. When left quite still it usually stays connected, at least with new cables.
My work provides cables and hence I have the oportunity to try several, and they all show the same pattern (probably because the she-part of the plug in the phone is part of the problem).
Also the earplug sound level and quality deteriorates quickly.
I hope that Apple has refurbished the "lightning" for 5S and 5C.

I have an IPAD 2 that I use to view an IP camera over a Wifi network. The Ipad is in a vehicle that leaves the Wifi range and then returns to the range. Upon returning to the range, the Ipad has trouble connecting to the network. (30 seconds)

I have an Ipad 2 that I use to view an IP camera over a Wifi network. The Ipad is in a vehicle that leaves the Wifi range and then returns to the range. Upon returning to the range, the Ipad has trouble connecting to the network. (30 seconds) The Ipad will eventually connect to the network, but by this time the driver is frustrated. I have moved the antenna to within 20' of where the vehicle comes to a stop. My Iphone does not have a problem connecting or reconnecting when used side by side with the Ipad. Both the Ipad and Iphone have Otter box covers. Has anyone run into this problem or have any suggestions?

30 seconds to reconnect to a WiFi network is not unusual, especially in an environment where other radio signals on similar frequencies are present. Sorry about that.
You might get better times by letting the WiFi base station pick another channel. But you might not.

My new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

my new iphone is running extremley slow, internet takes ages to load, apps take ages to install and has trouble connecting to app store. and the apps dont work properly like ebay wont open or refresh items, plz help
my iphone4 is 10 times faster
i have backed up on itunes and restored but still no luck
even siri is lagging

HT4199 My iphone has always connected automatically without problem to the wifi network at work, i.e.BTBusinessHub, and at home, i.e.Bthomehub. Now it tries to connect at work but doesnt manage it although it still works at home. Can anyone advise why?

My iphone has always connected automatically and without problem to the wifi at work i.e. BTBusinesshub and at home BTHomehub but yesterday it would not connect at work. It is ok at home but again today at work it is not connecting. It appears to try but is not connecting, please help.

You can try doing a reset, hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up - then check wifi - if that doesn't work then
do a network reset note: you will have to reenter wifi password again when your in range.
settings - general - reset - reset network settings. If that doesn't work then I would talk to your IT dept.

My wife iphone has trouble sending a messages with a picture

My wifes iphone has trouble sending a message with a picture or texting a picture, Is this a setting problem ?

http://support.apple.com/kb/TS2755?viewlocale=en_US&locale=en_US

Iphone 5 not connecting to home wifi

Hi,
I have a problem with my iPhone 5 not connecting to my home wifi. This is a recent (just today) issue, it has been connecting with no problem for over 2 years and remembering the password.
Today
It sees my SSID, if I click on it I get asked for the password - I enter the password (checked with my router settings and correct), and I get the message:
"Incorrect Password for "SSID" (name changed)
What I have done:
1. I have rebooted the phone (failed to fix)
2. I have reset my Network settings on the phone (failed to fix & mashed all my email settings)
3. I have backed up my phone to iTunes (BUT NOT RESTORED IT - YET)
4. I have rebooted my (netgear DGN1000 router) (failed to fix).
5. I have reset my router to factory settings, and whilst set with factory resets, tried to connect my phone (phone failed to recognise the default password)
6. I have reset my SSID and password to my preferences.
7. I reset my wireless encryption to "disable", and get message on the phone "Unable to join the network "SSID" (the lock icon disappeared off my phone)
8. I reset the encryption, the lock icon re-appeared, and I get message "Incorrect password..."
9. Other items: ipad air, Kindle Fire HD, iPhone 4 - all connect to the wifi with no problems, did before and still do now.
10 Been to the O2 store (O2 are my provider), and the phone connected to their In Store wifi with no issues (they say no fault on phone)
11. I have rung Virgin media (my landline & internet provider) and they have checked my router settings (they are OK) and advise me they can't help with the phone as it's "..an unsupported device.."
Stuck now! &

zolala:
Virgin media is my internet provider, and I have rung them too; They talked me through the router settings, but the iPhone is "unsupported".
My router settings are correct.
Can you explain "...are you using Apple Airport Extreme for hm network?..." please?
raymond73:
I have an "old Dlink GSL624" and I dug this out, but can't find the factory code for the passphrase (I had to reset to factory default)
If nothing else works, I'll get onto Virgin media and threaten to move isp unless they send me a new router. I have been with them for - well the days of dial up - well over 10 years probably.
I am currently restoring the iPhone to its factory default. I will set up as a new phone to test, and IF it works, I'll then restore to backup - If it stops working after this, I'll have to copy all my contacts somehow, and then start from scratch again.
Any idea how I can copy just my contacts somewhere I can restore them from easily?
Thanks

HT201653 after downloading 8.1.1 I have trouble connecting and keeping wifi connection on ipad 4

after downloading 8.1.1 I have trouble connecting and keeping wifi connection on ipad 4

I also reset the network connection. Rebooted it, used forget network and started over, I did everything that Apple said and it still doesn't connect most of the time but my iphone 5c and my laptop works great on wifi.

Trouble connection to certain wifi APs

So I've been having trouble connecting to some wifi access points over the last half last year or so. The weird thing is that my notebook stopped connecting to one AP which works for other devices, used to work with the notebook and now it connects to some networks (like eduroam) but refuses to connect to others, like my access point at home. Other distributions and operating systems, like Kali Linux and Windows 8 connect fine to the same access points on the same notebook.
My hardware is a Thinkpad Edge E325 with this network controller
01:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter [10ec:8176] (rev 01)
The kernel is the latest stable 3.16.4 and wpa_supplicant is 2.2-2, but I think it's been happening since somewhere around linux 3.13.x.
The logs I could gather are useless to me. Here is NetworkManagers journal output:
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Activation (wlan0) starting connection 'STERNCHEN_Netzwerk'
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Activation (wlan0/wireless): connection 'STERNCHEN_Netzwerk' has security, and secrets exist. No new secrets needed.
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Config: added 'ssid' value 'STERNCHEN_Netzwerk'
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Config: added 'scan_ssid' value '1'
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Config: added 'psk' value '<omitted>'
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Okt 08 12:03:03 thinkpad-ajs124 NetworkManager[1008]: <info> Config: set interface ap_scan to 1
Okt 08 12:03:03 thinkpad-ajs124 kernel: wlan0: authenticate with 7e:4f:b5:c2:6b:10
Okt 08 12:03:04 thinkpad-ajs124 kernel: wlan0: send auth to 7e:4f:b5:c2:6b:10 (try 1/3)
Okt 08 12:03:04 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: inactive -> authenticating
Okt 08 12:03:04 thinkpad-ajs124 kernel: wlan0: authenticated
Okt 08 12:03:04 thinkpad-ajs124 kernel: wlan0: associate with 7e:4f:b5:c2:6b:10 (try 1/3)
Okt 08 12:03:04 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: authenticating -> associating
Okt 08 12:03:04 thinkpad-ajs124 kernel: wlan0: RX AssocResp from 7e:4f:b5:c2:6b:10 (capab=0x411 status=0 aid=2)
Okt 08 12:03:04 thinkpad-ajs124 kernel: wlan0: associated
Okt 08 12:03:04 thinkpad-ajs124 kernel: cfg80211: Calling CRDA to update world regulatory domain
Okt 08 12:03:04 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: associating -> 4-way handshake
Okt 08 12:03:04 thinkpad-ajs124 kernel: wlan0: deauthenticating from 7e:4f:b5:c2:6b:10 by local choice (Reason: 1=UNSPECIFIED)
Okt 08 12:03:04 thinkpad-ajs124 kernel: cfg80211: Calling CRDA to update world regulatory domain
Okt 08 12:03:04 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: 4-way handshake -> group handshake
Okt 08 12:03:04 thinkpad-ajs124 NetworkManager[1008]: <warn> Connection disconnected (reason -1)
Okt 08 12:03:04 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: group handshake -> disconnected
Okt 08 12:03:04 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Okt 08 12:03:18 thinkpad-ajs124 kernel: wlan0: authenticate with 7e:4f:b5:c2:6b:10
Okt 08 12:03:18 thinkpad-ajs124 kernel: wlan0: send auth to 7e:4f:b5:c2:6b:10 (try 1/3)
Okt 08 12:03:18 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Okt 08 12:03:18 thinkpad-ajs124 kernel: wlan0: authenticated
Okt 08 12:03:18 thinkpad-ajs124 kernel: wlan0: associate with 7e:4f:b5:c2:6b:10 (try 1/3)
Okt 08 12:03:18 thinkpad-ajs124 kernel: wlan0: RX AssocResp from 7e:4f:b5:c2:6b:10 (capab=0x411 status=0 aid=2)
Okt 08 12:03:18 thinkpad-ajs124 kernel: wlan0: associated
Okt 08 12:03:18 thinkpad-ajs124 kernel: cfg80211: Calling CRDA to update world regulatory domain
Okt 08 12:03:18 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: authenticating -> associating
Okt 08 12:03:18 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: associating -> 4-way handshake
Okt 08 12:03:18 thinkpad-ajs124 kernel: wlan0: deauthenticating from 7e:4f:b5:c2:6b:10 by local choice (Reason: 1=UNSPECIFIED)
Okt 08 12:03:18 thinkpad-ajs124 kernel: cfg80211: Calling CRDA for country: DE
Okt 08 12:03:18 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: 4-way handshake -> group handshake
Okt 08 12:03:18 thinkpad-ajs124 NetworkManager[1008]: <warn> Connection disconnected (reason -1)
Okt 08 12:03:18 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: group handshake -> disconnected
Okt 08 12:03:18 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Okt 08 12:03:29 thinkpad-ajs124 NetworkManager[1008]: <warn> Activation (wlan0/wireless): association took too long.
Okt 08 12:03:29 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Okt 08 12:03:29 thinkpad-ajs124 NetworkManager[1008]: <warn> Activation (wlan0/wireless): asking for new secrets
Okt 08 12:03:29 thinkpad-ajs124 NetworkManager[1008]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Okt 08 12:03:29 thinkpad-ajs124 NetworkManager[1008]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Okt 08 12:03:29 thinkpad-ajs124 NetworkManager[1008]: <warn> No agents were available for this request.
Okt 08 12:03:29 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Okt 08 12:03:29 thinkpad-ajs124 NetworkManager[1008]: <warn> Activation (wlan0) failed for connection 'STERNCHEN_Netzwerk'
Okt 08 12:03:29 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Okt 08 12:03:29 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): deactivating device (reason 'none') [0]
Okt 08 12:03:29 thinkpad-ajs124 NetworkManager[1008]: <warn> Couldn't disconnect supplicant interface: This interface is not connected.
Okt 08 12:03:30 thinkpad-ajs124 NetworkManager[1008]: <info> (wlan0): supplicant interface state: scanning -> inactive
wpa_supplicant debug logs generated with "wpa_supplicant -dd -Dnl80211 -iwlan0 -c/etc/wpa_supplicant/STERNCHEN_Netzwerk.conf" where STERNCHEN_Netzwerk.conf is
network={
ssid="STERNCHEN_Netzwerk"
key_mgmt=WPA-PSK
psk="supersecretpassword"
This problem might actually solve itself, since I'll probably give this notebook away in a few weeks, but I'd still like to find the reason for this.

Well, that's quite a drastic solution so I've saved it for last (Recovery Mode).
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Is there a way to get a log of the bluetooth devices my iphone has been connected to? My Bluetooth car speaker phone was recently stolen from my car and appears to be on Craigslist.

Is there any way to get a log of the bluetooth devices my Iphone has been connected to? I recenly had my Bluetooth Jabra stolen from my car and now a simliar one is on Craigslist. I'd like to give my connection log to the police before I go and see if my Iphone recognizes the device in question. Any way to get any type of bluetooth device connection log out of my iphone?

Your contacts should still be on whatever program you sync your iphone to (i.e. Outlook, address book).
The iphone is not a stand alone device. It is designed to be synced with a computer. If you have not been syncing with a compatible program, then you are out of luck. Your contacts are not included in the back-up because it is meant to be synced with your computer.
"Although iTunes backs up most of your iPhone and iPod touch settings, downloaded applications, and other information (Contacts, calendars, notes, images in the Camera Roll), your audio, video, and photo content are not included in the backup."
http://support.apple.com/kb/HT1414

I can't send emails from iPhone until I connect to my wifi! I am with bigpond and have a bigpond email address. Can anyone help me?

I can't send emails from iPhone until I connect to my wifi at home. I am with bigpond and have a bigpond email address. Can anyone help me?

Try closing the Mail app completely and see if it works properly when you re-open it : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

My iphone has lost connection to the server; I cannot get e-mails.

My iphone has lost connection to the server; I cannot get e-mails. What can I do to fix that?

I recently put on a PowerPoint presentation at DU, in Denver Colorado; signed on as DU guest to access Internet link. SInce then I haven't been able to get e-mail on my Iphone - Cannot Get Mail, Server Stopped Responding. I tried all previous suggestions, such as rebooting phone, updating software etc. I went to MacBook Pro and tried logging on to yahoo e-mail. Apparently there was a security risk to my e-mail account so Yahoo locked up my account. I reset my password, it was verified through text message, and Voila it worked. Don't forget you also have to change this on your Iphone: go into settings; Mail, Contacts, Calendars; click on your e-mail browser, then account and enter your new password, click done and it will verify on you phone as well. Hope this helps!!!

My iphone 4 wont connect to my wifi, it usualy works fine, when i go to settings it says its connected but on the home screen it still says 3g and is running at 3g speeds still, please help :)

my iphone 4 wont connect to my wifi, it usualy works fine, when i go to settings it says its connected but on the home screen it still says 3g and is running at 3g speeds still? please help

http://support.apple.com/kb/ts1398

My iPhone has two computers in (iTunes wifi sync), how can I remove one of them without using it ?

Hello everyone.
My iPhone has two computers in (iTunes wifi sync) how can I remove one of them without using that computer?
because that PC stopped working so I had to recover it. Now everything is gone on that PC.
Also I bought a new computer (MacBook Pro) and I use iTunes on it in the mean time. Now I want to remove the old computer!
here is a photo of my (iTunes WiFi sync)
is there any way that I can use to do that?
Thanks

Hello,
Did you ever find a solution for this ?
I have the same issue and i dont know how to fix it.

My iphone has trouble connecting to a wifi range extender

Similar Messages

Maybe you are looking for