My iphone in stuck in Zoom

I have an iphone it is stuck in Zoom mode.  I cannot reduce to readable text.

Double tap the screen with 3 fingers.

Similar Messages

  • Iphone 6plus stuck in zoom. Cannot put in passcode because screen is too big. cannot reset to factory settings because I need to login passcode.

    I have an Iphone 6 plus which is stuck in zoom mode.  The screen is to large for me to put in my passcode so I can try to fix the problem. I was going to reset the IPhone on ITunes but it wouldn't allow me to do that without inputting the passcode into the iPhone. How can I get the IPhone out of zoom mode?

    Double-tap the screen with THREE fingers. Then go to Settings/General/Accessibility and turn off Zoom.

  • IPhone stuck on zoom. How to get it back to normal display?

    iphone stuck on zoom. How to get it back to normal display?

    use 2 fingers and pinch the screen with your fingers together and it will zoom out

  • Lock screen and other app stuck on zoomed mode

    I noticed that my lock screen is stuck on zoomed mode. When I'm in my home screen it's in standard view. Also I'm having the same issue with my apps. Apps like Pinterest, Tumblr, Swarm, Twitter looks fine but other apps like Facebook and Instagram are all stuck on zoomed mode. How do i fix this?

    Hello iankyliu,
    It may be that the zoom accessibility feature has been enabled. The article linked below details how to go about turning it off.
    iOS: Home screen icons are magnified or large
    http://support.apple.com/kb/TS3129
    Otherwise, it may be Display Zoom that's enabled, which is explained in the iPhone User Guide.
    iPhone User Guide - Display Zoom (iPhone 6 or iPhone 6 Plus)
    http://help.apple.com/iphone/8/
    Cheers,
    Allen

  • Imac stuck in zoom mode

    Hi
    My Imac is stuck in zoom mode. serial number= C0******8J5.  i've tired everything, its just not zooming out. I did go to system preferences and zoom but it seems like nothing is wrong in those settings. I did press cmd+alt= . but its just not working. It's Not moving with my curser either. Its showing me everything on the screen but its all zoomed in. I'm attaching a picture of the whole screen, if it helps. I dont know how to fix it. please help.
    <Edited By Host>

    Two ways are available.
    1. Connect to iTunes. Go to the iPhone summary pane and click the "Configure Universal Access" button. Then turn Zoom off.
    2. Double-tap the phone's screen with three fingers. Then go to Settings -> General -> Accessibility -> Zoom and tap the Zoom On/Off switch.

  • My iphone is stuck,  it says connect to itunes, and when I aconnect it to my pc, my pc says restore data but everything will be erased and I don't wanna lose everything. please help me

    my iphone is stuck,  it says connect to itunes, and when I aconnect it to my pc, my pc says restore data but everything will be erased and I don't wanna lose everything. please help me

    If you have a graphic of iTunes and a cable displayed on your iDevice then it is in Recovery mode.
    Check this to try an "exit"
    http://osxdaily.com/2011/01/08/iphone-recovery-mode/

  • I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

    Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • My 5s iPhone is stuck on Itunes icon and a cable. I tried to do a restore but the iPhone isn't updated. All the labs that i send it to, couldn't fix it, what I can to? help! thanks.

    My 5s iPhone is stuck on Itunes icon and a cable. I tried to do a restore but the iPhone isn't updated. All the labs that i send it to, couldn't fix it, what I can to? help! thanks.

    Sounds like a 'stuck' Shift key. You could try to take the key off and put it back on yourself (should be some info on that from ifixit) or just take it to your local Apple Store and have them fix it.
    Clinton

  • IPhone 3gs stuck in recovery mode, firmware iO 5

    My iPhone is stuck in recovery mode. I have a 3gs, firmware 5.0.
    Before I tried to restore it, my iPhone would randomly shut off, turn back on, and display a notification that said "Activation Required." Now, sometimes my phone would shut off again and return to it's previous working state. However, this time it did not. I put the phone into recovery mode and tried restoring it on my Acer Aspire 1 with Windows 7. iTunes put the phone through the various stages of restoration; Extracting Software, Preparing iPhone for Restore, Restoring Software, Verifying Restore, Restoring Firmware. After all of this, a nice little error message pops up that reads, "The iPhone 'iPhone' could not be restored. An unknown error has occured (1)."
    After this little mishap occured four more times, I decided to click "More Information," and was promptly brought to the help page set up here. I proceeded to troubleshoot by updating to the latest version of iTunes, updating my security, restarting my computer, and so forth until all the necessary precautions were performed. Now it was back to iTunes to try my luck at getting my life back.
    To my delight, I found that this time the restoration process took upwards of forty minutes to complete. However, to my despair, a nice little error message popped up that read, "The iPhone 'iPhone' could not be restored. An unknown error has occured (-1)." Ah, a different error message! i thought, feeling as if there was hope in fixing my phone. I clicked "More Information" and skimmed through the specific error messages, looking for that lucky -1. Nothing.
    I need help. I have attempted to restore my phone a dozen times since this occurence, and I'm growing tired of going through the same process over and over and getting the same result. My phone is stuck in recovery mode now. I've tried restoring the phone on 2 different computers, to find out if, in fact, the problem was my iPhone and not my computer.
    Some important information you may need to know in order to help me solve my problem:
    iPhone 3gs
    Running iOS 5.0
    Using iTunes 10.5
    On an Acer Aspire One Netbook
    Running Windows 7
    All security updates installed as of November 7, 2011
    Also iTunes 10.5 on Acer Aspire 57354774 laptop
    Running Windows 7
    Reply ASAP with a solution please!

    Hello,
    I have an iPhone 3GS which I updated with the last firmware (iOS 5) 2 weeks ago. Everything goes ok.
    And suddenly, while the phone was recharching. It asked me to activate it but I was unable to do it as it was rebooting constantly every time I connected it to iTunes.
    I tried both 2 restore modes (Restore and DFU) but since I can't achieve a restore with the last Apple iOS 5 firmware. I got the error code 1.
    I I tried on 3 different computers but same error. I really don't know what to do next...
    I already called Apple Customer Care and I'm still waiting for an answer. I let you know.
    And you, did you manage to get your iPhone back alive ?

  • How do i fix my iphone 5 stuck in recovery mode and wont let me restore it just says unknown error 1603 has occured

    how do i fix my iphone 5 stuck in recovery mode and wont let me restore it just says unknown error 1603 has occured

    http://support.apple.com/kb/TS3694#error1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
    http://support.apple.com/kb/TS3694#error1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

  • IPhone 3GS stuck in recovery mode while updating to iOS 6.1

    Hello there, I was updating my iPhone 3GS(New Bootrom) from iOS6.0 to iOS 6.1. While it was updating, iTunes suddenly ends up saying error and now my iPhone is stuck in recovery mode loop. I've tried DFU mode on my iPhone and try to kick it out by using TinyUmbrella but the computer doesn't reconize it. And when it was on recovery, iTunes doesn't reconize too, a window pops up and says i have to install 'Apple Mobile Device'. I've re-install and install iTunes a couple of times and nothing is working. Switching on and off the iPhone doesn't work too. Please, someone help me with this problem! I really do not know what to do! Please reply this As Soon As Possible!

    Ok. I have spent the last 8 hours researching this problem and have the absolute 110% answer to everyone's problem with this issue.
    Error 13 and 14 : Are checksum problems with the firmware image that is in the update package.
    The update package is a .ipsw (IPod or IPhone SoftWare). This file is actually just a .zip renamed .ipsw.
    The error is caused by a failure to download a crc-free version of the file. Not really sure why there are so many crc problems with the iphone updates, but Apple does not check the integrity of the update package before wiping your current version of IPhone software and that is why all IPhones that start an update with a bad update package end up in recovery mode. These errors are NOT related to the iTunes installation, antivirus software, or firewalls.
    Recommendation : use a program like "Object Fix" (Freeware) to verify the integrity of the file prior to commencing with any new updates. You will have to keep trying to download it until you get a error free file. Once you have a CRC error free file this problem will go away. (I thought TCP/IP helped get rid of CRC errors.)
    I had another problem and that was...
    Error 1603 and 1604 : These are USB driver connectivity problems.
    Recommendation : FULLY uninstall and re-install itunes software as stated in the Apple support documentation. Be sure to reboot between each step and these problems should clear themselves up. In addition, firewalls and anti-virus software may cause these errors as well.
    Finally, shame on apple for not properly documenting their software so that end users do not have to decrypt their error messages with no true support to solve the issues. These are problems that enough people have had that there should be specific documentation on these problems.

  • IPhone 5 stuck in recovery mode. Not recognized in iTunes for Windows

    Hi,
    My iphone 5 stuck during update to 8.2. It is now frozen in recovery mode, showing a 'connect to itunes' screen. The problem I have is that (the recently upgraded to 12.0.1) itunes is not recognizing my device. I have tried all of the suggestions here: iPhone, iPad, or iPod touch not recognized in iTunes for Windows, to no avail. I have not removed iTunes and reinstalled to test that, as I am concerned this will destroy the backups of my phone - which I will now desperately need once the phone is recovered.
    Has anyone got any suggestions?
    Cheers

    Hi AmberX92,
    If you receive an error 3194 when attempting to restore your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    Error 3194, Error 17, or "This device isn't eligible for the requested build"
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server.

    After attempting to update to ios 7, my iphone is stuck in recovery mode and will not connect to the itunes software server.  I have already tried the resetting with power swich and home button and plugging into computer but it says the "iPhone software update server cannot be contacted."  I am locked out of my phone.  Does anyone have any idea how to resolve this issue and get the phone working again.  I will add that I am now trying to restore it on a different computer with a lower version of itunes, but the computer that it initially happened on had the updated itunes and gave me the same result ... nothing.  Thanks for your help in advance.

    Try going to recovery mode as described here.  You may have to try this more than once to succeed.
    Use the original iTunes that the iPhone synced with.
    http://support.apple.com/kb/HT1808

  • My iPhone is stuck in headphone mode. I've tried inserting and removing headphone jacks, blowing compress air into jack opening, using warm air from hair dryer, but

    My iPhone is stuck in headphone mode. I've tried inserting and removing headphone jacks, blowing compress air into jack opening, using warm air from hair dryer, and a number of setting changes, but the iphone is still in headphone mode.

    it's a hardware issue
    https://discussions.apple.com/thread/1343532?start=315&tstart=0

  • My iphone is stuck in recovery mode and wont recover in itunes

    hi all, my iphone is stuck in recovery mode, have tried holding down buttons and reconnecting to itunes, it still is frozen,,,what do i do????

    I'm having the same problem!!! My iphone worked perfectly until all of a sudden it says i can't receive or make calls and that i need to restore it? So i try but then right in the middle of restoring it, my iphone just disconnects by itself?

Maybe you are looking for

  • Need to convert original language to EN in SAPscript

    Hi all I have copied a standard form and need to convert the language to EN but when I go to Utilities the option of convert original language is disable. How can I go for it. Regrds Mona

  • OBIEE 11g - create dashboard with Answers Analyse and BI Publisher Repport

    Hi there, I have one question . I create dashboard in OBIEE 11g .In my dashboard have one analyse and one bip report .I create one prompt filter , that changes the both .But I wanted when i click in analysis and change it, this change is reflected in

  • Exchange, Entourage, iPhone invite accept issues

    There are four people in my company who are having issues using the iPhone with Entourage. The symptoms are all the same (although there are other users who use iPhones and Entourage who have not experienced any issues). Invites that are sent from En

  • Urgent required sql statement

    i have a table named stock dt date partycode number(10) itemcode number(10) inqty number(10) outqty number(10) i want to find out the stock ledger that cb is calculated as ob+inqty-outqty. and ob is calculated group by dt,partycode,itemcode please gi

  • To create a output condition record

    Hi Gurus In order to print the output for contact person(PARNR) in Billing document, In VV31, What are the fields that i have to assign/combine to create a conditon record for  contact person(PARNR), Partner Function for this is CP. Regards Stephen