My iphone is disabled it saying to connect to itunes but when i do it still wont let me type my pin into it please help :(?
Please help my phone wont let me type in my password and when connected to itunes it wont let me type my password in still
You need to restore the iPhone, not just connect it. If iTunes says that the iPhone needs to be unlocked before it can be restored, put the iPhone into Recovery Mode:
http://support.apple.com/kb/ht1808
and then restore it.
Regards.
Similar Messages
-
my iphone is disabled. it prompted me to connect to itunes but when i connected to itunes... it will just say cant detect iphone because it needs to unlocked. how can i unlocked if theres no way to unlock it? pls advise. ty!
Hey aldrichangel!
Here is an article that has a few suggestions for you that will help you unlock your phone:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
my ipod touch is disabled and says to connect to itunes, but when i do it does nothing. how do i fix this?
1) See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
2) Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
when i turn on ipod it says it's disabled and connect to itunes. When i connect to itunes it says ipod locked with pass code unlock before connecting, which i can't do. Help!
You need to manually place the iPod in recovery mode and then restore it in iTunes. See this article for instructions on connecting your iPod to iTunes in recovery mode.
http://support.apple.com/kb/ht1808
B-rock -
I really need to get this fixed
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
My iphone is Disabled and says to connect to itunes, i did the whole restore thing but then an error pops up and says' sorry we cannot restore the iphone 'iphone'" ... What do i do?
Use recovery mode, you might need to do it a few times.
http://support.apple.com/kb/HT1808 -
How do you retrieve a password when your Ipod say's connect to ITunes, but when you go on ITunes it says to unlock password?
You will need to do this:
iOS: Unable to update or restore -
ipad is disabled and i had connect to itunes. but when i connected to my computer, its not sinc automatically , still ask me to enter the pascode first. so how can i restore my ipad ? seems my laptop didnt know or never get sinc with my ipad.
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
my ipod is disabled ,it says to connect to itunes when i connect to itunes it says i have to have a password to connect to itunes. So how do i connect the ipos to itunes when it is disabled and wont let me type in a password?
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
batmanlovesyou wrote:
that dont work -
My ipod 5th generation says to connect to itunes but when i connect it, it does'nt show anything
my ipod says connect to itunes which i did but when im on it it wont show anyhing
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software -
My daughter got locked out of her ipod touch 4th generation. It now says ipod disabled, connect to itunes. I have plugged it into my computer and to I tunes and It doesn't connect to either. I have plugged in my sons ipod using the same cord and his connects with itunes so I know its not the cord or usb ports on my laptop. I have tried holding the home button and power button until it shows a cord and the itunes icon and say connect to itunes and I still get nothing... Please help!!!
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
i have an iPhone 4 and it turns on but it keeps "searching" for service and it says to connect to my itunes and a support grouop but when i plug it into my laptop (and i have a toshiba not a mac) my phone doesnt even connect so i have no idea whatas going on with my phone and i need it asap!
Check your connection - Reset Network Settings - Toggle Airplane Mode -
If none of those help hard reset the phone
Hold down the Home button and the Power on/off button "at the same time"
-Screen will go black then after a few seconds you should see the Apple Logo, once you see the logo let go of both buttons. Allow the iPhone to reboot- -
my grandson forgot his password for his ipod 3 and it says disabled connect to itunes > when we connect it to itunes it just says to enter the password and we need suggestions on how to unlock it > right now it will not let us go to any screen to put in a code to try to unlock it
thanks
PamTry Recovery Mode.
Read this: http://support.apple.com/kb/ht1808 -
Please help!!!
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
my iphone 4s fell and display went blank,and when i restarted it shows a USB on display asking to connect with itunes,instead i went to a phone repair shop where they service iphones too.First they said that they have to install the IOS4 again in it but they could not do so due to an error so later they asked me whether they should install IOS5 i agreed but it only happened after a long struggle yet the phone remains in the same state with the display showing USB asking to connect with itunes..they could not fix it..please help me..:(
What's there to help? You dropped your phone and now it's broken. You'll have to bring your phone into Apple for an out of warranty exchange. If you purchased Apple Care+ is will cost $49.00, if not, it will be $199.00
Maybe you are looking for
-
How to get photos off my iphone 4s that does not turn on
i have nearly 2,000 photos on my iphone 4s, but my iphone just stopped working, wont turn on, i just really want the photos off thats all ive tried holding both buttons for ages and still nothing, can someone help me pls
-
Update Assembly which is a Procedure/Function in Oracle
Hi everybody, I have developed some Procedures and Functions in c# 2.0 for Oracle 10.2 and deployed them with the Oracle Deployment Assistent. After some problems they work!!!! Even as Triggers!!! Now my question is, how I can simply Update an Assemb
-
Lost midi input button on score and matrix windows
Hello -- Here is a weird one. Does anhyone know how you can loose the midi input button for step input on the score window in screen set 1 but have it on screen set 2 and others. In screen set 1 I had the arrange window openned with matrix, score, ev
-
New to EEM, i wanna soft reset BGP when a prefix list is applied
Hello, This is my script: event manager applet SOFTRESETBGP_IN event cli pattern "neighbor 10.0.0.2 prefix-list.* in" sync no skip no period 1 action 1.0 cli command "do clear ip bgp 10.0.0.2 soft in" action 2.0 syslog msg "BGP PEERS SOFT RESETED
-
How to access a button inside a MovieClip which is the source of a scrollpane?
Hi Everyone, I have created a crollpane in my flash file and the source of the scrollpane is a movieclip which contains a buttons. Now I want to add a gotoAndStop function to that button to link to a frame on the main timeline. Could anyone tell me w